>Can you show a much later part of the configure output, where it says stuff
  like
  
  I have attached the configure log..
  
  it says
  
  <db.h> NOT found.
  
  Why this is happening i don't understand, after specifying the path of Berkley DB lib and include in the configure step.
  

Yitzchak Scott-Thoennes <sthoenna@efn.org> wrote:  On Tue, Aug 01, 2006 at 05:59:06AM -0700, mohammad yaseen wrote:
> Below is the part of the configure output where it is able to locate -ldb
>   
>   
>   if this doesn't make any sense to you, just accept the default 'n'.
>   Try to use long doubles if available? [n]

Can you show a much later part of the configure output, where it says stuff
like:

Checking alignment constraints...
Doubles must be aligned on a how-many-byte boundary? [8]

Checking to see how your cpp does stuff like concatenate tokens...
Oh!  Smells like ANSI's been here.
We can catify or stringify, separately or together!

 found.

Checking Berkeley DB version ...
You have Berkeley DB Version 2 or greater.
db.h is from Berkeley DB Version 4.3.28
libdb is from Berkeley DB Version 4.3.28
db.h and libdb are compatible.
Looks OK.

Checking return type needed for hash for Berkeley DB ...
Your version of Berkeley DB uses u_int32_t for hash.

Checking return type needed for prefix for Berkeley DB ...
Your version of Berkeley DB uses size_t for prefix.


 		
---------------------------------
Do you Yahoo!?
 Get on board. You're invited to try the new Yahoo! Mail Beta.
Attachment: [text/html]

(I see you are using the Korn shell.  Some ksh's blow up on Configure,
mainly on older exotic systems.  If yours does, try the Bourne shell instead.)
 
Beginning of configuration questions for perl5.
 
Checking echo to see how to suppress newlines...
...using \c
The star should be here-->*
 
First let's make sure your kit is complete.  Checking...
Looks good...
 

This installation shell script will examine your system and ask you questions
to determine how the perl5 package should be installed. If you get
stuck on a question, you may use a ! shell escape to start a subshell or
execute a command.  Many of the questions will have default answers in square
brackets; typing carriage return will give you the default.

On some of the questions which ask for file or directory names you are allowed
to use the ~name construct to specify the login directory belonging to "name",
even if you don't have a shell which knows about that.  Questions where this is
allowed will be marked "(~name ok)".

[Type carriage return to continue]  

The prompter used in this script allows you to use shell variables and
backticks in your answers.  You may use $1, $2, etc...  to refer to the words
in the default answer, as if the default line was a set of arguments given to a
script shell.  This means you may also use $* to repeat the whole default line,
so you do not have to re-type everything to add something to the default.

Everytime there is a substitution, you will have to confirm.  If there is an
error (e.g. an unmatched backtick), the default answer will remain unchanged
and you will be prompted again.

If you are in a hurry, you may run 'Configure -d'.  This will bypass nearly all
the questions and use the computed defaults (or the previous answers if there
was already a config.sh file). Type 'Configure -h' for a list of options.
You may also start interactively and then answer '& -d' at any prompt to turn
on the non-interactive behaviour for the remainder of the execution.

[Type carriage return to continue]  

Much effort has been expended to ensure that this shell script will run on any
Unix system.  If despite that it blows up on yours, your best bet is to edit
Configure and run it again.  If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand.  Whatever problems you
have, let me (perlbug@perl.org) know how I blew it.

This installation script affects things in two ways:

1) it may do direct variable substitutions on some of the files included
   in this kit.
2) it builds a config.h file for inclusion in C programs.  You may edit
   any of these files as the need arises after running this script.

If you make a mistake on a question, there is no easy way to back up to it
currently.  The easiest thing to do is to edit config.sh and rerun all the SH
files.  Configure will offer to let you do this before it runs the SH files.

[Type carriage return to continue]  
 
Locating common programs...
awk is in /u/mvsbuild/zos14/bin/awk.
cat is in /u/mvsbuild/zos14/bin/cat.
chmod is in /u/mvsbuild/zos14/bin/chmod.
comm is in /u/mvsbuild/zos14/bin/comm.
cp is in /u/mvsbuild/zos14/bin/cp.
echo is in /u/mvsbuild/zos14/bin/echo.
expr is in /u/mvsbuild/zos14/bin/expr.
grep is in /u/mvsbuild/zos14/bin/grep.
ls is in /u/mvsbuild/zos14/bin/ls.
mkdir is in /u/mvsbuild/zos14/bin/mkdir.
rm is in /u/mvsbuild/zos14/bin/rm.
sed is in /u/mvsbuild/zos14/bin/sed.
sort is in /u/mvsbuild/zos14/bin/sort.
touch is in /u/mvsbuild/zos14/bin/touch.
tr is in /u/mvsbuild/zos14/bin/tr.
uniq is in /u/mvsbuild/zos14/bin/uniq.
 
Don't worry if any of the following aren't found...
I don't see Mcc out there, offhand.
ar is in /u/mvsbuild/zos14/bin/ar.
bison is in /usr/bin/bison.
I don't see byacc out there, either.
I don't see cpp out there, either.
I don't see csh out there, either.
date is in /u/mvsbuild/zos14/bin/date.
egrep is in /u/mvsbuild/zos14/bin/egrep.
gmake is in /usr/bin/gmake.
gzip is in /usr/bin/gzip.
less is in /usr/bin/less.
ln is in /u/mvsbuild/zos14/bin/ln.
make is in /usr/bin/gmake.
more is in /u/mvsbuild/zos14/bin/more.
nm is in /u/mvsbuild/zos14/bin/nm.
I don't see nroff out there, either.
pg is in /u/mvsbuild/zos14/bin/pg.
test is in /u/mvsbuild/zos14/bin/test.
uname is in /u/mvsbuild/zos14/bin/uname.
zip is in /usr/bin/zip.
 
Checking compatibility between /u/mvsbuild/zos14/bin/echo and builtin echo (if any)...
They are compatible.  In fact, they may be identical.
 
Symbolic links are supported.
 
Checking how to test for symbolic links...
Your builtin 'test -h' may be broken.
Trying external '/u/mvsbuild/zos14/bin/test -h'.
You can test for symbolic links with '/u/mvsbuild/zos14/bin/test -h'.
 
 
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.

First time through, eh?  I have some defaults handy for some systems
that need some extra help getting the Configure answers right:

3b1             dos_djgpp       irix_6_0        nonstopux       sunos_4_0   
aix             dynix           irix_6_1        openbsd         sunos_4_1   
aix_3           dynixptx        isc             opus            super-ux   
aix_4           epix            isc_2           os2             svr4   
altos486        esix4           linux           os390           svr5   
amigaos         fps             lynxos          os400           ti1500   
apollo          freebsd         machten         posix-bc        titanos   
atheos          genix           machten_2       powerux         ultrix_4   
aux_3           gnu             mint            qnx             umips   
beos            gnukfreebsd     mips            rhapsody        unicos   
bsdos           gnuknetbsd      mpc             sco             unicosmk   
convexos        greenhills      mpeix           sco_2_3_0       unisysdynix   
cxux            hpux            ncr_tower       sco_2_3_1       utekv   
cygwin          i386            netbsd          sco_2_3_2       uts   
darwin          interix         newsos4         sco_2_3_3       uwin   
dcosx           irix_4          next_3          sco_2_3_4       vmesa   
dec_osf         irix_5          next_3_0        solaris_2       vos   
dgux            irix_6          next_4          stellar         

You may give one or more space-separated answers, or "none" if appropriate.
A well-behaved OS will have no hints, so answering "none" or just "Policy"
is a good thing.  DO NOT give a wrong version or a wrong OS.

Which of these apply, if any? [os390]  

Configure uses the operating system name and version to set some defaults.
The default value is probably right if the name rings a bell. Otherwise,
since spelling matters for me, either accept the default or answer "none"
to leave it blank.

Operating system name? [os390]  
 
Operating system version? [18.00]  

Perl can be built to use the SOCKS proxy protocol library.  To do so,
Configure must be run with -Dusesocks.  If you use SOCKS you also need
to use the PerlIO abstraction layer, this will be implicitly selected.

If this doesn't make any sense to you, just accept the default 'n'.
Build Perl for SOCKS? [n]  

Previous version of perl5 used the standard IO mechanisms as
defined in <stdio.h>.  Versions 5.003_02 and later of perl5 allow
alternate IO mechanisms via the PerlIO abstraction layer, but the
stdio mechanism is still available if needed.  The abstraction layer
can use AT&T's sfio (if you already have sfio installed) or regular stdio.
Using PerlIO with sfio may cause problems with some extension modules.

If this doesn't make any sense to you, just accept the default 'y'.
Use the PerlIO abstraction layer? [y]  

Perl can be built to take advantage of threads on some systems.
To do so, Configure can be run with -Dusethreads.

Note that Perl built with threading support runs slightly slower
and uses more memory than plain Perl. The current implementation
is believed to be stable, but it is fairly new, and so should be
treated with caution.

If this doesn't make any sense to you, just accept the default 'y'.
Build a threading Perl? [y]  

Since release 5.6, Perl has had two different threading implementations,
the newer interpreter-based version (ithreads) with one interpreter per
thread, and the older 5.005 version (5005threads).
The 5005threads version is effectively unmaintained and will probably be
removed in Perl 5.10, so there should be no need to build a Perl using it
unless needed for backwards compatibility with some existing 5.005threads
code.

Use the newer interpreter-based ithreads? [y]  
(Your platform does not have any specific hints for threaded builds.
 Assuming POSIX threads, then.)

Perl can be built so that multiple Perl interpreters can coexist
within the same Perl executable.
This multiple interpreter support is required for interpreter-based threads.
 
Hmm...  Looks kind of like a BSD system, but we'll see...
 
Congratulations.  You aren't running Eunice.
 
It's not Xenix...
 
Nor is it Venix...
Use which C compiler? [c89]  
 
Checking for GNU cc in disguise and/or its version number...
You are not using GNU cc.
 
Hmm...  Doesn't look like a MIPS system.
 
Now, how can we feed standard input to your C preprocessor...
Keeping your recommended cppstdin wrapper.
Maybe "c89 -E" will work...
Nope...maybe "c89 -E -" will work...
Nope...maybe "c89 -P" will work...
Nope...maybe "c89 -P -" will work...
No such luck, maybe "cpp" will work...
Nixed again...maybe "cpp -" will work...
Uh-uh.  Time to get fancy.  Trying a wrapper...
Eureka!

Some systems have incompatible or broken versions of libraries.  Among
the directories listed in the question below, please remove any you
know not to be holding relevant libraries, and add any that are needed.
Say "none" for none.

Directories to use for library searches?
[/u/isldev1/NDB/lib /usr/local/lib /lib /usr/lib]  

On some systems, shared libraries may be available.  Answer 'none' if
you want to suppress searching of shared libraries for the remainder
of this configuration.

What is the file extension used for shared libraries? [so]  

Perl can be built to take advantage of long doubles which
(if available) may give more accuracy and range for floating point numbers.

If this doesn't make any sense to you, just accept the default 'n'.
Try to use long doubles if available? [n]  
 
Checking for optional libraries...
No -lsfio.
No -lsocket.
No -lbind.
No -linet.
No -lnsl.
No -lnm.
No -lndbm.
No -lgdbm.
No -ldbm.
Found -ldb.
No -lmalloc.
No -ldl.
No -ldld.
No -lld.
No -lsun.
Found -lm.
No -lcrypt.
No -lsec.
No -lutil.
Found -lc.
No -lcposix.
No -lposix.
No -lucb.
No -lbsd.
No -lBSD.

In order to compile perl5 on your machine, a number of libraries
are usually needed.  Include any other special libraries here as well.
Say "none" for none.  The default list is almost always right.
 
What libraries to use? [-ldb -lm -lc]  

By default, perl5 compiles with the -O flag to use the optimizer.
Alternately, you might want to use the symbolic debugger, which uses
the -g flag (on traditional Unix systems).  Either flag can be
specified here.  To use neither flag, specify the word "none".

What optimizer/debugger flag should be used? [none]  

Your C compiler may want other flags.  For this question you should include
-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
but you should NOT include libraries or ld flags like -lwhatever.  If you
want perl5 to honor its debug switch, you should include -DDEBUGGING here.
Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.

To use no flags, specify the word "none".

Any additional cc flags?
[-2 -Wc,XPLINK -DMAXSIG=39 -DOEMVS -D_OE_SOCKETS -D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -D_SHR_ENVIRON -DPERL_EXTERNAL_GLOB -Wc,dll -I/u/isldev1/NDB/include -I/usr/local/include]  
 
Let me guess what the preprocessor flags are...

Your C linker may need flags.  For this question you should
include -L/whatever and any other flags used by the C linker, but you
should NOT include libraries like -lwhatever.

Make sure you include the appropriate -L/path flags if your C linker
does not normally search all of the directories you specified above,
namely
	/u/isldev1/NDB/lib /usr/local/lib /lib /usr/lib
To use no flags, specify the word "none".

Any additional ld flags (NOT including libraries)?
[-Wl,EDIT=NO -Wl,XPLINK,dll -L/u/isldev1/NDB/lib -L/usr/local/lib]  
 
Checking your choice of C compiler and flags for coherency...
OK, that should do.
 
Computing filename position in cpp output for #include directives...
Your cpp writes the filename in the ??? field of the line.
 
<stdlib.h> found.
 
Checking to see how big your integers are...
Your integers are 4 bytes long.
Your long integers are 4 bytes long.
Your short integers are 2 bytes long.
 
Checking to see if you have long long...
You do not have long long.
 
<inttypes.h> found.
 
Checking to see if you have int64_t...
You do not have int64_t.
 
Checking which 64-bit integer type we could use...
Alas, no 64-bit integer types in sight.

Perl can be built to take advantage of 64-bit integer types
on some systems.  To do so, Configure can be run with -Duse64bitint.
Choosing this option will most probably introduce binary incompatibilities.

If this doesn't make any sense to you, just accept the default 'n'.
(The default has been chosen based on your configuration.)
Try to use 64-bit integers, if available? [n]  

You may also choose to try maximal 64-bitness.  It means using as much
64-bitness as possible on the platform.  This in turn means even more
binary incompatibilities.  On the other hand, your platform may not
have any more 64-bitness available than what you already have chosen.

If this doesn't make any sense to you, just accept the default 'n'.
(The default has been chosen based on your configuration.)
Try to use maximal 64-bit support, if available? [n]  
 
Checking to see how big your double precision numbers are...
Your double is 8 bytes long.
 
Checking to see if you have long double...
You have long double.
 
Checking to see how big your long doubles are...
Your long doubles are 16 bytes long.
 
What is your architecture name [os390]  
Threads selected.
...setting architecture name to os390-thread.
Multiplicity selected.
...setting architecture name to os390-thread-multi.
Perlio selected.

By default, perl5 will be installed in /u/isldev1/BPERL/bin, manual pages
under /u/isldev1/BPERL/man, etc..., i.e. with /u/isldev1/BPERL as prefix for all
installation directories. Typically this is something like /usr/local.
If you wish to have binaries under /usr/bin but other parts of the
installation under /usr/local, that's ok: you will be prompted
separately for each of the installation directories, the prefix being
only used to set the defaults.

Installation prefix to use? (~name ok) [/u/isldev1/BPERL]  
 
AFS does not seem to be running...

In some special cases, particularly when building perl5 for distribution,
it is convenient to distinguish the directory in which files should be
installed from the directory (/u/isldev1/BPERL) in which they will
eventually reside.  For most users, these two directories are the same.

What installation prefix should I use for installing files? (~name ok)
[/u/isldev1/BPERL]  
 
Getting the current patchlevel...
(You have perl5 version 8 subversion 7.)

There are some auxiliary files for perl5 that need to be put into a
private library directory that is accessible by everyone.

Pathname where the private library files will reside? (~name ok)
[/u/isldev1/BPERL/lib/perl5/5.8.7]  

Perl5 contains architecture-dependent library files.  If you are
sharing libraries in a heterogeneous environment, you might store
these files in a separate location.  Otherwise, you can just include
them with the rest of the public library files.

Where do you want to put the public architecture-dependent libraries? (~name ok)
[/u/isldev1/BPERL/lib/perl5/5.8.7/os390-thread-multi]  

Some kernels have a bug that prevents setuid #! scripts from being
secure.  Some sites have disabled setuid #! scripts because of this.

First let's decide if your kernel supports secure setuid #! scripts.
(If setuid #! scripts would be secure but have been disabled anyway,
don't say that they are secure if asked.)

I don't think setuid scripts are secure (no /dev/fd directory).
(That's for file descriptors, not floppy disks.)
 
Some systems have disabled setuid scripts, especially systems where
setuid scripts cannot be secure.  On systems where setuid scripts have
been disabled, the setuid/setgid bits on scripts are currently
useless.  It is possible for perl5 to detect those bits and emulate
setuid/setgid in a secure fashion.  This emulation will only work if
setuid scripts have been disabled in your kernel.

Do you want to do setuid/setgid emulation? [n]  
 
<malloc.h> found.
 
Checking to see how well your C compiler groks the void type...
Good.  It appears to support void to the level perl5 wants.
 
Checking to see how big your pointers are...
Your pointers are 4 bytes long.
 
Do you wish to wrap malloc calls to protect against potential overflows? [n]  
 
Do you wish to attempt to use the malloc that comes with perl5? [n]  
 
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.

After perl5 is installed, you may wish to install various
add-on modules and utilities.  Typically, these add-ons will
be installed under /u/isldev1/BPERL with the rest
of this package.  However, you may wish to install such add-ons
elsewhere under a different prefix.

If you do not wish to put everything under a single prefix, that's
ok.  You will be prompted for the individual locations; this siteprefix
is only used to suggest the defaults.

The default should be fine for most people.

Installation prefix to use for add-on modules and utilities? (~name ok)
[/u/isldev1/BPERL]  

The installation process will create a directory for
site-specific extensions and modules.  Most users find it convenient
to place all site-specific files in this directory rather than in the
main distribution directory.

Pathname for the site-specific library files? (~name ok)
[/u/isldev1/BPERL/lib/perl5/site_perl/5.8.7]  

The installation process will also create a directory for
architecture-dependent site-specific extensions and modules.

Pathname for the site-specific architecture-dependent library files? (~name ok)
[/u/isldev1/BPERL/lib/perl5/site_perl/5.8.7/os390-thread-multi]  

The installation process will also create a directory for
vendor-supplied add-ons.  Vendors who supply perl with their system
may find it convenient to place all vendor-supplied files in this
directory rather than in the main distribution directory.  This will
ease upgrades between binary-compatible maintenance versions of perl.

Of course you may also use these directories in whatever way you see
fit.  For example, you might use them to access modules shared over a
company-wide network.

The default answer should be fine for most people.
This causes further questions about vendor add-ons to be skipped
and no vendor-specific directories will be configured for perl.

Do you want to configure vendor-specific add-on directories? [n]  

Lastly, you can have perl look in other directories for extensions and
modules in addition to those already specified.
These directories will be searched after 
	/u/isldev1/BPERL/lib/perl5/site_perl/5.8.7/os390-thread-multi 
	/u/isldev1/BPERL/lib/perl5/site_perl/5.8.7 
 
Enter a colon-separated set of extra paths to include in perl's @INC
search path, or enter 'none' for no extra paths.

Colon-separated list of additional directories for perl to search? [none]  
 
Checking out function prototypes...
Your C compiler appears to support function prototypes.
 
Pathname where the public executables will reside? (~name ok)
[/u/isldev1/BPERL/bin]  
Directory /u/isldev1/BPERL/bin doesn't exist.  Use that name anyway? [y]  
 
Perl can be built with extra modules or bundles of modules which
will be fetched from the CPAN and installed alongside Perl.

Notice that you will need access to the CPAN; either via the Internet,
or a local copy, for example a CD-ROM or a local CPAN mirror.  (You will
be asked later to configure the CPAN.pm module which will in turn do
the installation of the rest of the extra modules or bundles.)

Notice also that if the modules require any external software such as
libraries and headers (the libz library and the zlib.h header for the
Compress::Zlib module, for example) you MUST have any such software
already installed, this configuration process will NOT install such
things for you.

If this doesn't make any sense to you, just accept the default 'n'.
Install any extra modules (y or n)? [n]  
 

If you wish to install html files for programs in Perl5, indicate 
the appropriate directory here.  To skip installing html files,
answer "none".
Directory for the main Perl5 html pages? (~name ok) [none]  

If you wish to install html files for modules associated with Perl5,
indicate the appropriate directory here.  To skip installing html files,
answer "none".
Directory for the Perl5 module html pages? (~name ok) [none]  
Looking for a previously installed perl5.005 or later... 
Using /usr/bin/perl.

In order to ease the process of upgrading, this version of perl 
can be configured to use modules built and installed with earlier 
versions of perl that were installed under /u/isldev1/BPERL.  Specify here
the list of earlier versions that this version of perl should check.
If Configure detected no earlier versions of perl installed under
/u/isldev1/BPERL, then the list will be empty.  Answer 'none' to tell perl
to not search earlier versions.

The default should almost always be sensible, so if you're not sure,
just accept the default.
List of earlier versions to include in @INC? [none]  
 
Many scripts expect perl to be installed as /usr/bin/perl.

If you want to, I can install the perl you are about to compile
as /usr/bin/perl (in addition to /u/isldev1/BPERL/bin/perl).

However, please note that because you already have a /usr/bin/perl,
overwriting that with a new Perl would very probably cause problems.
Therefore I'm assuming you don't want to do that (unless you insist).

Do you want to install perl as /usr/bin/perl? [n]  
 
Checking for GNU C Library...
You are not using the GNU C Library

I can use /u/mvsbuild/zos14/bin/nm to extract the symbols from your C libraries. This
is a time consuming task which may generate huge output on the disk (up
to 3 megabytes) but that should make the symbols extraction faster. The
alternative is to skip the 'nm' extraction part and to compile a small
test program instead to determine whether each symbol is present. If
you have a fast C compiler and/or if your 'nm' output cannot be parsed,
this may be the best solution.

You probably shouldn't let me use 'nm' if you are using the GNU C Library.

Shall I use /u/mvsbuild/zos14/bin/nm to extract C symbols from the libraries?
[n]  
 
<dld.h> NOT found.
 
dlopen() NOT found.
 
Do you wish to use dynamic loading? [y]  
The following dynamic loading files are available:
ext/DynaLoader/dl_aix.xs      ext/DynaLoader/dl_mac.xs
ext/DynaLoader/dl_beos.xs     ext/DynaLoader/dl_mpeix.xs
ext/DynaLoader/dl_dld.xs      ext/DynaLoader/dl_next.xs
ext/DynaLoader/dl_dllload.xs  ext/DynaLoader/dl_none.xs
ext/DynaLoader/dl_dlopen.xs   ext/DynaLoader/dl_vmesa.xs
ext/DynaLoader/dl_dyld.xs     ext/DynaLoader/dl_vms.xs
ext/DynaLoader/dl_hpux.xs     
Source file to use for dynamic loading [ext/DynaLoader/dl_dllload.xs]  

Some systems may require passing special flags to c89 -c to
compile modules that will be used to create a shared library.
To use no flags, say "none".

Any special flags to pass to c89 -c to compile shared library modules?
[-c -Wc,XPLINK,dll,EXPORTALL]  

Some systems use ld to create libraries that can be dynamically loaded,
while other systems (such as those using ELF) use c89.

What command should be used to create dynamic libraries? [c89]  

Some systems may require passing special flags to c89 to create a
library that can be dynamically loaded.  If your ld flags include
-L/other/path options to locate libraries outside your loader's normal
search path, you may need to specify those -L options here as well.  To
use no flags, say "none".

Any special flags to pass to c89 to create a dynamically loaded library?
[-W l,XPLINK,dll /u/isldev1/BDBPERL/perl-5.8.7/libperl.x -L/u/isldev1/NDB/lib -L/usr/local/lib]  

Some systems may require passing special flags to c89 to indicate that
the resulting executable will use dynamic linking.  To use no flags,
say "none".

Any special flags to pass to c89 to use dynamic linking?
[-W l,XPLINK,dll /u/isldev1/BDBPERL/perl-5.8.7/libperl.x]  

The perl executable is normally obtained by linking perlmain.c with
libperl.a, any static extensions (usually just DynaLoader), and
any other libraries needed on this system (such as -lm, etc.).  Since
your system supports dynamic loading, it is probably possible to build
a shared libperl.so.  If you will have more than one executable linked
to libperl.so, this will significantly reduce the size of each
executable, but it may have a noticeable affect on performance.  The
default is probably sensible for your system.


Build a shared libperl.so (y/n) [y]  

I need to select a good name for the shared libperl.  If your system uses
library names with major and minor numbers, then you might want something
like .  Alternatively, if your system uses a single version
number for shared libraries, then you might want to use .
Or, your system might be quite happy with a simple libperl.so.

Since the shared libperl will get installed into a version-specific
architecture-dependent directory, the version number of the shared perl
library probably isn't important, so the default should be o.k.

What name do you want to give to the shared libperl? [libperl.so]  
Ok, I'll use libperl.so
 
System manual is in /local/man/man1.

Perl5 has manual pages available in source form.
However, you don't have nroff, so they're probably useless to you.
If you don't want the manual sources installed, answer 'none'.
 
Where do the main Perl5 manual pages (source) go? (~name ok) [none]  
 
You can have filenames longer than 14 characters.

Perl5 has manual pages for many of the library modules.
However, you don't have nroff, so they're probably useless to you.
If you don't want the manual sources installed, answer 'none'.
 
Where do the perl5 library man pages (source) go? (~name ok) [none]  
 
Figuring out host name...
Maybe "hostname" will work...
Your host name appears to be "AQMVSOE.POK.IBM.COM". Right? [y]  
(Normalizing case in your host name)
(Trimming domain name from host name--host name is now aqmvsoe)
 
What is your domain name? [.pok.ibm.com]  

I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
is most probably close to reality but may not be valid from outside
your organization...

What is your e-mail address? [ISLDEV1@aqmvsoe.pok.ibm.com]  

If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.

Perl administrator e-mail address [ISLDEV1@aqmvsoe.pok.ibm.com]  
 
Do you want to install only the version-specific parts of the perl
distribution?  Usually you do *not* want to do this.
Do you want to install only the version-specific parts of perl? [n]  

I can use the #! construct to start perl on your system. This will
make startup of perl scripts faster, but may cause problems if you
want to share those scripts and perl is not in a standard place
(/u/isldev1/BPERL/bin/perl) on all your platforms. The alternative is to force
a shell by starting the script with a single ':' character.

What shall I put after the #! to start up perl ("none" to not use #!)?
[/u/isldev1/BPERL/bin/perl]  
I'll use #!/u/isldev1/BPERL/bin/perl to start perl scripts.
 
Some installations have a separate directory just for executable scripts so
that they can mount it across multiple architectures but keep the scripts in
one spot.  You might, for example, have a subdirectory of /usr/share for this.
Or you might just lump your scripts in with all your other executables.
 
Where do you keep publicly executable scripts? (~name ok)
[/u/isldev1/BPERL/bin]  
Directory /u/isldev1/BPERL/bin doesn't exist.  Use that name anyway? [y]  
Pathname where the add-on public executables should be installed? (~name ok)
[/u/isldev1/BPERL/bin]  
Directory /u/isldev1/BPERL/bin doesn't exist.  Use that name anyway? [y]  
Pathname where the site-specific html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific library html pages should be installed? (~name ok)
[none]  
Pathname where the site-specific manual pages should be installed? (~name ok)
[none]  
Pathname where the site-specific library manual pages should be installed? (~name ok)
[none]  
Pathname where add-on public executable scripts should be installed? (~name ok)
[/u/isldev1/BPERL/bin]  

Perl can be built to use 'fast stdio', which means using the stdio
library but also directly manipulating the stdio buffers to enable
faster I/O.  Using stdio is better for backward compatibility (especially
for Perl extensions), but on the other hand since Perl 5.8 the 'perlio'
interface has been preferred instead of stdio.

If this doesn't make any sense to you, just accept the default 'y'.
Use the "fast stdio" if available? [y]  
 
Looking for the type used for lseek's offset on this system.
off_t found.
 
Checking to see how big your file offsets are...
Your file offsets are 4 bytes long.
 
Looking for the type for file position used by fsetpos().
fpos_t found.
 
Checking the size of fpos_t...
Your fpos_t is 32 bytes long.

Perl can be built to understand large files (files larger than 2 gigabytes)
on some systems.  To do so, Configure can be run with -Duselargefiles.

If this doesn't make any sense to you, just accept the default 'y'.
Try to understand large files, if available? [y]  
 
qgcvt() NOT found.
 
Checking how to print long doubles...
We will use %Lf.
 
Checking for an efficient way to convert floats to strings.
Trying sprintf...
sprintf() found.
I'll use sprintf to convert floats into a string.
 
fwalk() NOT found.
 
access() found.
 
<unistd.h> defines the *_OK access constants.
 
accessx() NOT found.
 
aintl() NOT found.
 
alarm() found.
 
<pthread.h> found.
 
<sys/types.h> found.
 
<sys/select.h> NOT found.
 
Testing to see if we should include <time.h>, <sys/time.h> or both.
I'm now running the test program...... 
Succeeded with -DI_TIME -DI_SYSTIME -DS_TIMEVAL 
We'll include <time.h>.
We'll include <sys/time.h>.
 
Checking to see if your struct tm has tm_zone field...
No, it doesn't.
 
Checking to see if your struct tm has tm_gmtoff field...
No, it doesn't.
 
asctime_r() found.
asctime_r() prototype found.
Prototype: char* asctime_r(const struct tm*, char*);
 
atolf() NOT found.
 
atoll() NOT found.
 
Checking whether your compiler can handle __attribute__ ...
Your C compiler doesn't seem to understand __attribute__ at all.
 
bcmp() found.
 
bcopy() found.
 
<unistd.h> found.
 
getpgrp() found.
 
Checking to see which flavor of getpgrp is in use...
You have to use getpgrp() instead of getpgrp(pid).
 
setpgrp() found.
 
Checking to see which flavor of setpgrp is in use...
You have to use setpgrp() instead of setpgrp(pid,pgrp).
 
bzero() found.
 
You have void (*signal())().
 
Checking whether your C compiler can cast large floats to int32.
Nope, it can't.
 
Checking whether your C compiler can cast negative float to unsigned.
Yup, it can.
 
vprintf() found.
Your vsprintf() returns (int).
 
chown() found.
 
chroot() found.
 
chsize() NOT found.
 
class() NOT found.
 
Hmm... Looks like you have Berkeley networking support.
 
socketpair() found.
 
Checking the availability of certain socket constants...
 
<sys/uio.h> found.
 
Checking to see if your system supports struct cmsghdr...
No, it doesn't.
 
Checking to see if your C compiler knows about "const"...
Yup, it does.
 
copysignl() NOT found.
 
 
crypt() found.
 
<crypt.h> NOT found.
 
crypt_r() NOT found.
 
ctermid_r() NOT found.
 
ctime_r() found.
ctime_r() prototype found.
Prototype: char* ctime_r(const time_t*, char*);
 
cuserid() found.
 
<limits.h> found.
 
<float.h> found.
 
DBL_DIG found.
 
dbmclose() NOT found.
We won't be including <dbm.h>
 
dbminit() prototype NOT found.
 
difftime() found.
 
<dirent.h> found.
 
Your directory entries are struct dirent.
 
Good, your directory entry keeps length information in d_namlen.
 
<sys/dir.h> NOT found.
 
<sys/ndir.h> NOT found.
 
dirfd() found.
 
dlerror() NOT found.
 
<dlfcn.h> found.

On a few systems, the dynamically loaded modules that perl generates and uses
will need a different extension than shared libs. The default will probably
be appropriate.

What is the extension of dynamically loaded modules [so]  
 
 
drand48_r() NOT found.
 
drand48() prototype found.
 
dup2() found.
 
eaccess() NOT found.
 
endgrent() found.
 
<grp.h> found.
 
endgrent_r() NOT found.
 
endhostent() found.
 
<netdb.h> found.
 
endhostent_r() NOT found.
 
endnetent() found.
 
endnetent_r() NOT found.
 
endprotoent() found.
 
endprotoent_r() NOT found.
 
endpwent() found.
 
<pwd.h> found.
 
endpwent_r() NOT found.
 
endservent() found.
 
endservent_r() NOT found.
 
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
 
Using <string.h> instead of <strings.h>.
 
<sys/file.h> found.
 
We'll be including <sys/file.h>.
 
<fcntl.h> found.
 
We don't need to include <fcntl.h> if we include <sys/file.h>.
 
Figuring out the flag used by open() for non-blocking I/O...
Seems like we can use O_NONBLOCK.
 
Let's see what value errno gets from read() on a O_NONBLOCK file...
A read() system call with no data present returns -1.
Your read() sets errno to EAGAIN when no data is available.
And it correctly returns 0 to signal EOF.
 
Checking how std your stdio is...
Your stdio doesn't appear very std.
 
fchdir() found.
 
fchmod() found.
 
fchown() found.
 
fcntl() found.
 
Checking if fcntl-based file locking works... 
Yes, it seems to work.

Checking to see how well your C compiler handles fd_set and friends ...
Well, your system knows about the normal fd_set typedef...
and you have the normal fd_set macros (just as I'd expect).
 
fgetpos() found.
 
finite() found.
 
finitel() NOT found.
 
flock() NOT found.
 
flock() prototype NOT found.
 
fork() found.
 
fp_class() NOT found.
 
pathconf() found.
 
fpathconf() found.
 
fpclass() NOT found.
 
fpclassify() NOT found.
 
fpclassl() NOT found.
 
Checking to see if you have fpos64_t...
You do not have fpos64_t.
 
frexpl() found.
 
<sys/param.h> NOT found.
 
<sys/mount.h> NOT found.
 
Checking to see if your system supports struct fs_data...
No, it doesn't.
 
fseeko() found.
 
fsetpos() found.
 
fstatfs() NOT found.
 
statvfs() found.
 
fstatvfs() found.
 
fsync() found.
 
ftello() found.
 
getcwd() found.
 
getespwnam() NOT found.
 
getfsstat() NOT found.
 
getgrent() found.
 
getgrent_r() NOT found.
 
getgrgid_r() found.
getgrgid_r() prototype found.
Prototype: int getgrgid_r(gid_t, struct group*, char*, size_t, struct group**);
 
getgrnam_r() found.
getgrnam_r() prototype found.
Prototype: int getgrnam_r(const char*, struct group*, char*, size_t, struct group**);
 
gethostbyaddr() found.
 
gethostbyname() found.
 
gethostent() found.
 
gethostname() found.
uname() found.
 
Every now and then someone has a gethostname() that lies about the hostname
but can't be fixed for political or economic reasons.  If you wish, I can
pretend gethostname() isn't there and maybe compute hostname at run-time
thanks to the 'hostname' command.

Shall I ignore gethostname() from now on? [n]  
 
gethostbyaddr_r() found.
 
*** WHOA THERE!!! ***
    The recommended value for $d_gethostbyaddr_r on this machine was "undef"!
    Keep the recommended value? [y]  
 
gethostbyname_r() found.
 
*** WHOA THERE!!! ***
    The recommended value for $d_gethostbyname_r on this machine was "undef"!
    Keep the recommended value? [y]  
 
gethostent_r() NOT found.
 
gethostent() prototype found.
 
getitimer() found.
 
getlogin() found.
 
getlogin_r() found.
getlogin_r() prototype found.
Prototype: int getlogin_r(char*, size_t);
 
getmnt() NOT found.
 
getmntent() NOT found.
 
getnetbyaddr() found.
 
getnetbyname() found.
 
getnetent() found.
 
getnetbyaddr_r() NOT found.
 
getnetbyname_r() NOT found.
 
getnetent_r() NOT found.
 
getnetent() prototype found.
 
getpagesize() found.
 
getprotobyname() found.
 
getprotobynumber() found.
 
getprotoent() found.
 
getpgid() found.
 
getpgrp2() NOT found.
 
getppid() found.
 
getpriority() found.
 
getprotobyname_r() NOT found.
 
getprotobynumber_r() NOT found.
 
getprotoent_r() NOT found.
 
getprotoent() prototype found.
 
getprpwnam() NOT found.
 
getpwent() found.
 
getpwent_r() NOT found.
 
getpwnam_r() found.
getpwnam_r() prototype found.
Prototype: int getpwnam_r(const char*, struct passwd*, char*, size_t, struct passwd**);
 
getpwuid_r() found.
getpwuid_r() prototype found.
Prototype: int getpwuid_r(uid_t, struct passwd*, char*, size_t, struct passwd**);
 
getservbyname() found.
 
getservbyport() found.
 
getservent() found.
 
getservbyname_r() NOT found.
 
getservbyport_r() NOT found.
 
getservent_r() NOT found.
 
getservent() prototype found.
 
getspnam() NOT found.
 
<shadow.h> NOT found.
 
getspnam_r() NOT found.
 
gettimeofday() found.
 
gmtime_r() found.
gmtime_r() prototype found.
Prototype: struct tm* gmtime_r(const time_t*, struct tm*);
 
hasmntopt() NOT found.
 
<netinet/in.h> found.
 
<arpa/inet.h> found.
 
htonl() NOT found.
But it seems to be defined as a macro.
 
ilogbl() NOT found.
 
strchr() found.
 
inet_aton() NOT found.
 
isascii() found.
 
isfinite() NOT found.
 
isinf() NOT found.
 
isnan() found.
 
isnanl() NOT found.
 
killpg() found.
 
lchown() found.
 
LDBL_DIG found.
 
<math.h> found.
 
Checking to see if your libm supports _LIB_VERSION...
No, it does not (probably harmless)

 
link() found.
 
localtime_r() found.
localtime_r() prototype found.
Prototype: struct tm* localtime_r(const time_t*, struct tm*);
 
localeconv() found.
 
lockf() found.
 
lseek() prototype found.
 
lstat() found.
 
madvise() NOT found.
 
mblen() found.
 
mbstowcs() found.
 
mbtowc() found.
 
memchr() found.
 
memcmp() found.
 
memcpy() found.
 
memmove() found.
 
memset() found.
 
mkdir() found.
 
mkdtemp() NOT found.
 
mkfifo() found.
 
mkstemp() found.
 
mkstemps() NOT found.
 
mktime() found.
 
<sys/mman.h> found.
 
mmap() found.
and it returns (void *).
 
sqrtl() found.
 
scalbnl() NOT found.
 
modfl() found.
 
modfl() prototype found.
Checking to see whether your modfl() is okay for large values...
Your modfl() seems okay for large values.
 
mprotect() found.
 
msgctl() found.
 
msgget() found.
 
msgsnd() found.
 
msgrcv() found.
 
You have the full msg*(2) library.
 
Checking to see if your system supports struct msghdr...
Yes, it does.
 
msync() found.
 
munmap() found.
 
nice() found.
 
<langinfo.h> found.
 
nl_langinfo() found.
 
Checking to see how big your characters are (hey, you never know)...
What is the size of a character (in bytes)? [1]  
 
Checking to see if your C compiler knows about "volatile"...
Yup, it does.
 
Choosing the C types to be used for Perl's internal types...
(IV will be long, 4 bytes)
(UV will be unsigned long, 4 bytes)
(NV will be double, 8 bytes)
Checking how many bits of your UVs your NVs can preserve...
Your NVs can preserve all 32 bits of your UVs.
 
Checking to see if you have off64_t...
You do not have off64_t.
 
Checking what constant to use for creating joinable pthreads...
You seem to use __UNDETACHED.
 
pause() found.
 
pipe() found.
 
poll() found.
 
readlink() found.
 
pthread_atfork found.
 
*** WHOA THERE!!! ***
    The recommended value for $d_pthread_atfork on this machine was "undef"!
    Keep the recommended value? [y]  
 
pthread_attr_setscope() NOT found.
sched_yield() NOT found.
pthread_yield() found.
 
random_r() NOT found.
 
readdir() found.
 
seekdir() found.
 
telldir() found.
 
rewinddir() found.
 
readdir64_r() NOT found.
 
readdir_r() found.
readdir_r() prototype found.
Prototype: int readdir_r(DIR*, struct dirent*, struct dirent**);
 
readv() found.
 
recvmsg() found.
 
rename() found.
 
rmdir() found.
 
<memory.h> found.
 
We won't be including <memory.h>.
 
I'll use memmove() instead of bcopy() for overlapping copies.
 
I'll use memmove() instead of memcpy() for overlapping copies.
 
Checking if your memcmp() can compare relative magnitude...
Yes, it can.
 
sbrk() prototype found.
 
select() found.
 
semctl() found.
 
semget() found.
 
semop() found.
 
You have the full sem*(2) library.
 
You do not have union semun in <sys/sem.h>.
 
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
 
sendmsg() found.
 
setegid() found.
 
seteuid() found.
 
setgrent() found.
 
setgrent_r() NOT found.
 
sethostent() found.
 
sethostent_r() NOT found.
 
setitimer() found.
 
setlinebuf() NOT found.
 
setlocale() found.
 
<locale.h> found.
 
setlocale_r() NOT found.
 
setnetent() found.
 
setnetent_r() NOT found.
 
setprotoent() found.
 
setpgid() found.
 
setpgrp2() NOT found.
 
setpriority() found.
 
setproctitle() NOT found.
 
setprotoent_r() NOT found.
 
setpwent() found.
 
setpwent_r() NOT found.
 
setregid() found.
 
setresgid() NOT found.
 
setreuid() found.
 
setresuid() NOT found.
 
setrgid() NOT found.
 
setruid() NOT found.
 
setservent() found.
 
setservent_r() NOT found.
 
setsid() found.
 
setvbuf() found.
 
<sfio.h> NOT found.
 
shmctl() found.
 
shmget() found.
 
shmat() found.
and it returns (void *).
 
shmdt() found.
 
You have the full shm*(2) library.
 
sigaction() found.
 
sigprocmask() found.
 
POSIX sigsetjmp found.
 
sockatmark() NOT found.
 
sockatmark() prototype NOT found.
 
socks5_init() NOT found.
 
srand48_r() NOT found.
 
srandom_r() NOT found.
 
setresgid() prototype NOT found.
 
setresuid() prototype NOT found.
 
<sys/stat.h> found.
 
Checking to see if your struct stat has st_blocks field...
 
<sys/vfs.h> NOT found.
 
<sys/statfs.h> found.
 
Checking to see if your system supports struct statfs...
No, it doesn't.
No, it doesn't.
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
 
strcoll() found.
 
Checking to see if your C compiler can copy structs...
Yup, it can.
 
strerror() found.
(Since you don't have sys_errlist[], sterror() is welcome.)
 
strerror_r() NOT found.
 
strftime() found.
 
strlcat() NOT found.
 
strlcpy() NOT found.
 
strtod() found.
 
strtol() found.
 
strtold() NOT found.
 
strtoll() found.
 
strtoq() NOT found.
 
strtoul() found.
Checking whether your strtoul() works okay...
Your strtoul() seems to be working okay.
 
strtoull() found.
 
strtouq() NOT found.
 
strxfrm() found.
 
symlink() found.
 
syscall() NOT found.
 
syscall() prototype NOT found.
 
sysconf() found.
 
system() found.
 
tcgetpgrp() found.
 
tcsetpgrp() found.
 
telldir() prototype found.
 
time() found.
 
Looking for the type returned by time() on this system.
time_t found.
 
<sys/times.h> found.
 
times() found.
 
Looking for the type returned by times() on this system.
clock_t found.
 
tmpnam_r() NOT found.
 
truncate() found.
 
ttyname_r() found.
ttyname_r() prototype found.
Prototype: int ttyname_r(int, char*, size_t);
 
tzname[] found.
 
In the following, larger digits indicate more significance.  A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
machines may have weird orders like 3412.  A Cray will report 87654321,
an Alpha will report 12345678. If the test program works the default is
probably right.
I'm now running the test program...
(The test program ran ok.)
byteorder=4321

Checking to see whether you can access character data unalignedly...
(Testing for character data alignment may crash the test.  That's okay.)
You can access character data pretty unalignedly.
 
ualarm() found.
 
umask() found.
 
unordered() NOT found.
 
usleep() found.
 
usleep() prototype found.
 
ustat() NOT found.
 
vfork() found.
 
 
Perl can only use a vfork() that doesn't suffer from strict
restrictions on calling functions or modifying global data in
the child.  For example, glibc-2.1 contains such a vfork()
that is unsuitable.  If your system provides a proper fork()
call, chances are that you do NOT want perl to use vfork().

Do you still want to use vfork()? [n]  
Ok, we won't use vfork().
 
closedir() found.
 
Checking whether closedir() returns a status...
Yes, it does.
 
wait4() NOT found.
 
waitpid() found.
 
wcstombs() found.
 
wctomb() found.
 
writev() found.
 
Doubles must be aligned on a how-many-byte boundary? [8]  
 
Checking to see how your cpp does stuff like concatenate tokens...
Oh!  Smells like ANSI's been here.
We can catify or stringify, separately or together!
 
<db.h> NOT found.
 
Looking for a random number function...
Good, found drand48().
 
Use which function to generate random numbers? [drand48]  
 
Determining whether or not we are on an EBCDIC system...
You seem to speak EBCDIC.
 
Checking how to flush all pending stdio output...
Your fflush(NULL) isn't working (contrary to ANSI C).
Good, at least fflush(stdin) seems to behave okay when stdin is a pipe.
Sigh. Flushing explicitly all the stdio streams doesn't work.
OK, I give up.  I cannot figure out how to flush pending stdio output.
We won't be flushing handles at all before fork/exec/popen.
 
Looking for the type for group ids returned by getgid().
gid_t found.
 
Checking the size of gid_t...
Your gid_t is 4 bytes long.
 
Checking the sign of gid_t...
Your gid_t is signed.
 
 
Checking the format strings to be used for Perl's internal types...
 
Checking the format string to be used for gids...
 
getgroups() found.
 
setgroups() found.
 
What type of pointer is the second argument to getgroups() and setgroups()?
Usually this is the same as group ids, gid_t, but not always.

What type pointer is the second argument to getgroups() and setgroups()?
[gid_t]  
 
Checking if your /usr/bin/gmake program sets $(MAKE)...
Yup, it does.
 
Looking for the type used for file modes for system calls (e.g. fchmod()).
mode_t found.
 
<stdarg.h> found.
 
<varargs.h> found.
 
We'll include <stdarg.h> to get va_dcl definition.
 
It seems that va_copy() or similar will be needed.
 
Looking for the type used for the length parameter for string functions.
size_t found.

Checking to see what type of arguments are accepted by gethostbyaddr().
Your system accepts char * for the first arg.
...and size_t for the second arg.

Checking to see what type of argument is accepted by gethostbyname().
Your system accepts char *.

Checking to see what type of 1st argument is accepted by getnetbyaddr().
Your system accepts in_addr_t.
 
What pager is used on your system? [/usr/bin/less]  
 
Looking for the type of process ids on this system.
pid_t found.
 
Checking how to generate random libraries on your machine...
/u/mvsbuild/zos14/bin/ar appears to generate random libraries itself.
 
Checking to see what type of arguments are accepted by select().
Your system accepts fd_set *.

Checking to see on how many bits at a time your select() operates...
Your select() operates on 32 bits at a time.
 
Generating a list of signal names and numbers...
The following 40 signals are available:
 
SIGZERO SIGHUP SIGINT SIGABRT SIGILL SIGPOLL SIGURG SIGSTOP SIGFPE 
SIGKILL SIGBUS SIGSEGV SIGSYS SIGPIPE SIGALRM SIGTERM SIGUSR1 SIGUSR2 
SIGABND SIGCONT SIGCHLD SIGTTIN SIGTTOU SIGIO SIGQUIT SIGTSTP SIGTRAP 
SIGIOERR SIGWINCH SIGXCPU SIGXFSZ SIGVTALRM SIGPROF SIGDANGER 
SIGTHSTOP SIGTHCONT SIGNUM36 SIGNUM37 SIGDCE SIGDUMP SIGCLD 
 
Checking the size of size_t...
Your size_t size is 4 bytes.
 
Checking to see if you have socklen_t...
You have socklen_t.
 
<socks.h> NOT found.

Checking to see what type is the last argument of accept().
Your system accepts 'socklen_t *' for the last argument of accept().
 
I'll be using ssize_t for functions returning a byte count.
 
Your stdio uses signed chars.
 
Looking for the type for user ids returned by getuid().
uid_t found.
 
Checking the size of uid_t...
Your uid_t is 4 bytes long.
 
Checking the sign of uid_t...
Your uid_t is signed.
 
Checking the format string to be used for uids...
 
Which compiler compiler (yacc or bison -y) shall I use? [yacc]  
 
<fp.h> NOT found.
 
<fp_class.h> NOT found.
 
<ieeefp.h> NOT found.
 
<libutil.h> NOT found.
 
<mach/cthreads.h> NOT found.
 
<mntent.h> NOT found.
 
<ndbm.h> found.
 
dbm_open() found.
 
<net/errno.h> NOT found.
 
<netinet/tcp.h> NOT found.
 
<poll.h> found.
 
<prot.h> NOT found.
 
Guessing which symbols your C compiler and preprocessor define...
Your C pre-processor defines the following symbols:
_ALL_SOURCE
__ANSI__
_ILP32
__MVS__
OEMVS
__RT
__STDC__
_XOPEN_SOURCE_EXTENDED
__XPG4
 
tcsetattr() found.
 
You have POSIX termios.h... good!
 
<stddef.h> found.
 
<sunmath.h> NOT found.
 
<sys/access.h> NOT found.
 
<sys/filio.h> NOT found.
 
<sys/ioctl.h> found.
 
<sys/sockio.h> not found, assuming socket ioctls are in <sys/ioctl.h>.
 
<syslog.h> found.
 
<sys/mode.h> NOT found.
 
<sys/resource.h> found.
 
<sys/security.h> NOT found.
 
<sys/statvfs.h> found.
 
<sys/un.h> found.
 
<sys/utsname.h> found.
 
<sys/wait.h> found.
 
<ustat.h> NOT found.
 
<utime.h> found.
 
<values.h> NOT found.
 
<gdbm.h> NOT found.
 
Looking for extensions...
A number of extensions are supplied with perl5.  You may choose to
compile these extensions for dynamic loading (the default), compile
them into the perl5 executable (static loading), or not include
them at all.  Answer "none" to include no extensions.
Note that DynaLoader is always built and need not be mentioned here.

What extensions do you wish to load dynamically?
[B ByteLoader Cwd Data/Dumper Devel/DProf Devel/PPPort Devel/Peek Digest/MD5 Encode Fcntl File/Glob Filter/Util/Call I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 NDBM_File Opcode POSIX PerlIO/encoding PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Time/HiRes Unicode/Normalize XS/APItest XS/Typemap attrs re threads threads/shared]  
What extensions do you wish to load statically? [none]  
 
Stripping down cppstdin path name
 
End of configuration questions.
 
I see a config.arch file, loading it.
 
Stripping down executable paths...
 
Creating config.sh...
Hmm...You had some extra variables I don't know about...I'll try to keep 'em...
    Propagating recommended variable $gconvert_preference...
 
Doing variable substitutions on .SH files...
Extracting cflags (with variable substitutions)
Extracting config.h (with variable substitutions)
Extracting makeaperl (with variable substitutions)
Extracting makedepend (with variable substitutions)
Extracting makedir (with variable substitutions)
Extracting Makefile (with variable substitutions)
This is an EBCDIC system, checking if any parser files need regenerating.
perly.y -> perly.c
perly.y -> perly.h
a2p.y -> a2p.c
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting writemain (with variable substitutions)
Extracting x2p/cflags (with variable substitutions)
Extracting x2p/Makefile (with variable substitutions)

Now you need to generate make dependencies by running "gmake depend".
You might prefer to run it in background: "gmake depend > makedepend.out &"
It can take a while, so you might not want to run it right now.

Run gmake depend now? [y]  
sh ./makedepend MAKE=gmake
gmake[1]: Entering directory `/u/isldev1/BDBPERL/perl-5.8.7'
sh writemain lib/auto/DynaLoader/DynaLoader.a  > writemain.tmp
sh mv-if-diff writemain.tmp perlmain.c
cp op.c opmini.tmp
sh mv-if-diff opmini.tmp opmini.c
echo  av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c msg.c miniperlmain.c perlmain.c opmini.c | tr ' ' '\n' >.clist
gmake[1]: Leaving directory `/u/isldev1/BDBPERL/perl-5.8.7'
Finding dependencies for av.o.
Finding dependencies for scope.o.
Finding dependencies for op.o.
Finding dependencies for doop.o.
Finding dependencies for doio.o.
Finding dependencies for dump.o.
Finding dependencies for hv.o.
Finding dependencies for mg.o.
Finding dependencies for reentr.o.
Finding dependencies for perl.o.
Finding dependencies for perly.o.
Finding dependencies for pp.o.
Finding dependencies for pp_hot.o.
Finding dependencies for pp_ctl.o.
Finding dependencies for pp_sys.o.
Finding dependencies for regcomp.o.
Finding dependencies for regexec.o.
Finding dependencies for utf8.o.
Finding dependencies for gv.o.
Finding dependencies for sv.o.
Finding dependencies for taint.o.
Finding dependencies for toke.o.
Finding dependencies for util.o.
Finding dependencies for deb.o.
Finding dependencies for run.o.
Finding dependencies for universal.o.
Finding dependencies for xsutils.o.
Finding dependencies for pad.o.
Finding dependencies for globals.o.
Finding dependencies for perlio.o.
Finding dependencies for perlapi.o.
Finding dependencies for numeric.o.
Finding dependencies for locale.o.
Finding dependencies for pp_pack.o.
Finding dependencies for pp_sort.o.
Finding dependencies for msg.o.
Finding dependencies for miniperlmain.o.
Finding dependencies for perlmain.o.
Finding dependencies for opmini.o.
gmake[1]: Entering directory `/u/isldev1/BDBPERL/perl-5.8.7'
echo Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH makedir.SH myconfig.SH writemain.SH pod/Makefile.SH | tr ' ' '\n' >.shlist
gmake[1]: Leaving directory `/u/isldev1/BDBPERL/perl-5.8.7'
Updating makefile...
test -s perlmain.c && touch perlmain.c
cd x2p; gmake depend
gmake[1]: Entering directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
sh ../makedepend MAKE=gmake
gmake[2]: Entering directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
echo hash.c  str.c util.c walk.c | tr ' ' '\n' >.clist
gmake[2]: Leaving directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
Finding dependencies for hash.o.
Finding dependencies for str.o.
Finding dependencies for util.o.
Finding dependencies for walk.o.
gmake[2]: Entering directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
echo Makefile.SH cflags.SH | tr ' ' '\n' >.shlist
gmake[2]: Leaving directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
Updating makefile...
gmake[1]: Leaving directory `/u/isldev1/BDBPERL/perl-5.8.7/x2p'
Now you must run 'gmake'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.


--0-211919792-1154518771=:85972--