Redsail Rs1360c Plotter Driver.199

How to Install and Use Redsail RS1360C Plotter Driver
If you are looking for a reliable and affordable cutting plotter, you might=
 want to consider the Redsail RS1360C. This model is a Risc micro-controlle=
r based device that can cut various media up to 1360 mm wide and 1200 mm lo=
ng. It has a cutting speed of 600 mm/s and a cutting force of 10-500 g. It =
also has a LCD display, a resolution of 1000 DPI, and a HPGL command interf=
ace. The Redsail RS1360C can work with various sign making software, such a=
s Coreldraw, Artcut, WinPCSIGN, and Flexi Sign. In this article, we will sh=
ow you how to install and use the Redsail RS1360C plotter driver on your co=
mputer.

Step 1: Download the Redsail RS1360C plotter driver
The first step is to download the Redsail RS1360C plotter driver from the o=
fficial website[^1^]. You can find the link at the bottom of this page. Alt=
ernatively, you can also watch this YouTube video[^2^] that shows you how t=
o download and install the driver. The driver is compatible with Windows XP=
, Vista, 7, 8, and 10.

redsail rs1360c plotter driver.199
Download https://suffdiopunchi.blogspot.com/?ek=3D2wGIEd



Step 2: Install the Redsail RS1360C plotter driver
The next step is to install the Redsail RS1360C plotter driver on your comp=
uter. To do this, follow these steps:


Extract the downloaded zip file to a folder on your computer.
Connect the Redsail RS1360C plotter to your computer via USB or serial port=
.
Open the Device Manager on your computer and locate the plotter under the P=
orts (COM & LPT) section.
Right-click on the plotter and select Update Driver Software.
Select Browse my computer for driver software and then select Let me pick f=
rom a list of device drivers on my computer.
Select USB Serial Port or Prolific USB-to-Serial Comm Port from the list an=
d click Next.
Click Have Disk and then browse to the folder where you extracted the drive=
r files.
Select CH341SER.INF or PL2303_Prolific_DriverInstaller_v1.19.0.INF dependin=
g on your plotter model and click Open.
Click OK and then Next to install the driver.
Click Finish when the installation is complete.

Step 3: Configure the Redsail RS1360C plotter driver
The last step is to configure the Redsail RS1360C plotter driver on your co=
mputer. To do this, follow these steps:




Open the Device Manager on your computer and locate the plotter under the P=
orts (COM & LPT) section.
Right-click on the plotter and select Properties.
Select the Port Settings tab and then click Advanced.
Set the COM Port Number to a free port (e.g. COM4).
Set the Bits per second to 9600, Data bits to 8, Parity to None, Stop bits =
to 1, and Flow control to Hardware.
Click OK twice to save the settings.

Step 4: Use the Redsail RS1360C plotter driver
Now you are ready to use the Redsail RS1360C plotter driver on your compute=
r. You can use any sign making software that supports HPGL commands, such a=
s Coreldraw, Artcut, WinPCSIGN, or Flexi Sign. To use Coreldraw with the Re=
dsail RS1360C plotter driver, you need to install a plug-in software called=
 Cutmate2.3[^1^]. This software allows you to cut out directly from Coreldr=
aw without exporting files. To use Cutmate2.3 with Coreldraw, follow these =
steps:


Install Cutmate2.3 on your computer from the CD that came with your plotter=
 or download it from the official website[^1^].
Open Coreldraw
 35727fac0c