Bionx Bike Interface Software 11

How to Use Bionx Bike Interface Software 11 to Connect Your Bike to Your Co=
mputer

If you have a Bionx electric bike, you might want to use the Bionx Bike Int=
erface Software 11 (BBI 11) to customize your bike settings, update your fi=
rmware, or diagnose any issues. BBI 11 is a software that allows you to con=
nect your bike components to your computer via a USB to CAN bus converter c=
alled BIB (Bionx Interface Box). In this article, we will show you how to u=
se BBI 11 and BIB to connect your bike to your computer and access various =
features.


What You Need

To use BBI 11 and BIB, you will need the following:

Bionx Bike Interface Software 11
DOWNLOAD https://t.co/d7r5naf1UQ





A Bionx electric bike with a G1 or G2 console
A BIB (Bionx Interface Box) - this is a tool that converts USB signals to C=
AN bus signals that can communicate with your bike components. You can buy =
it from BX-Legacy or other online retailers[^1^].
A USB cable - this is used to connect the BIB to your computer.
A CAN bus cable - this is used to connect the BIB to your bike console.
A copy of BBI 11 software - this is the software that allows you to interac=
t with your bike components. BX-Legacy does not own the intellectual proper=
ty rights of BionX International, so they cannot provide the BBI 11 softwar=
e. However, you can download a modified offline version of BBI 11 from Open=
-Ebike or Endless-Sphere forums[^2^] [^3^]. Before buying a BIB, it is reco=
mmended to install the BBI 11 software first and make sure it works on your=
 computer.
A Windows computer - BBI 11 software only works on Windows operating system=
s.


How to Connect Your Bike to Your Computer

Once you have all the necessary tools and software, you can follow these st=
eps to connect your bike to your computer:



Install the BIB USB drivers on your computer. You can download them from BX=
-Legacy or FTDI website [^1^].
Connect the USB cable to the BIB and plug it into your computer.
Connect the CAN bus cable to the BIB and plug it into your bike console.
Turn on your bike battery and console.
Launch the BBI 11 software on your computer. You should see a green light o=
n the BIB indicating that it is connected.
Select your bike model and console type from the drop-down menus on the BBI=
 11 software.
Click on "Connect" button on the BBI 11 software. You should see a message =
saying "Connected" and showing your bike information.


How to Use BBI 11 Features

Once you have connected your bike to your computer, you can use various fea=
tures of the BBI 11 software, such as:



Customize your bike settings - you can change parameters such as wheel size=
, speed limit, assist levels, regenerative braking, etc.
Update your firmware - you can check if there are any updates available for=
 your bike components and install them if needed.
Diagnose any issues - you can run diagnostic tests on your bike components =
and see if there are any errors or warnings.
Save or load profiles - you can save or load
 35727fac0c