The Watchmaker Activation Unlock Code And Serial

To check the warranty status of your watch, you need to perform the followi=
ng steps:
1. Go to section =C2=ABMy Account=C2=BB
2. Press the button =C2=ABCreate Account=C2=BB and fill in all fields.
3. Go to the section =C2=ABMy Clock=C2=BB and choose the item =C2=ABAdd Clo=
ck=C2=BB.
4. Enter the serial number of your watch.
5. Choose the type of guarantee - if you have been given a white guarantee =
card - choose the item =C2=ABphysical guarantee=C2=BB, if you have been giv=
en a black guarantee card (it is not obligatory, on it only QR code with a =
reference to the section =C2=ABmy watch=C2=BB) - choose an electronic guara=
ntee.
6. Under the image of the clock you have to choose =C2=ABinternational guar=
antee=C2=BB - there will be specified date of purchase and term of warranty=
 service for your hours (2 or 3 years depending on the version of mechanism=
).


The Watchmaker Activation Unlock Code And Serial
Download File https://tinurli.com/2wHVT8



To unlock this watch face for just $2.99: https:\/\/www.paypal.me\/yp12345\=
/2.99usd (IMPORTANT: Please attach the serial number for generating the unl=
ock code), Please mention the \"Serial Number\" read in the first line in t=
he setting page and an unlock code will be sent in order to activate it. Th=
e unlock code works on the whole life in your watch and still works after u=
pgrade.How to get the serial number: Please open the connectiq and on your =
phone and find the watchface, open the setting and the first line is the un=
lock code. Thanks!A simplicity and richness watchface to show the analog ti=
me with second always on. It has Clear and clean watch face with always on =
second hand in efficient way, meanwhile it show rich info with rich configu=
rations it support on-device setting on new device. On some devices it supp=
ort on-device setting.simplicity and richness watchface is highly configura=
ble, PRO functions(Configuraion with PRO) could be tried for a hour and it =
would be rolled back to the default values. There are more than 10 configur=
able fields:1) Plenty of face style and some are available in PRO mode: * L=
uminous Bar * Simplicity * Pencil(Pro) * Army(Pro) * Sword(Pro) * Diamond(P=
ro) * Diamond(Pro) * WhiteBar(Pro) * Fenix6 style(Pro) * Fenix6 style2(Pro)=
2) Second hand options: * Always on: As most watchface act; * On when it's =
worn(Default): Turn off the second hand to save battery when you are sleep;=
 * On when lift the wrist: Act as the old watch which don't support always-=
on second hand; * Always off(to be developed): Extremely battery saving mod=
e;3) sunrise\/sunset time: show the next sunrise\/sunset timeTo enable the =
sunrise\/sunset calculations and the weather, you need to lock the GPS loca=
tion after installing this face. Just go to any activity that uses GPS and =
wait until 'GPS ready' appears, then exit the activity. Note that you will =
need to repeat this after changing your location, otherwise the displayed i=
nformation will reflect your last location.4) 2nd time zone: The 2nd time z=
one: if it's in [-11, 11] we open the 2nd timezone, or it's disabled.5) 3:0=
0 o'clock: Show the date and weekday: Now support English and Chinese;6) 6:=
00 o'clock: Show the steps: *disabled *icon with steps7) 9:00 o'clock: Show=
 The heartrate: * disabled * Update every 1 minute. * Real time heart rate:=
 Update every 1 second(Pro).8) 12:00 o'clock: Show the analog battery statu=
s: * disabled; * show analog battery volume; * show digital battery volume =
along with analog battery;9) Info below 12:00(Pro): * disabled; * user defi=
ned string; * weather: 1) it will be dimmer when it's out of date and you n=
eed to lift the wrist to update it with GPS\/BLE connected; 2) You need to =
get the GPS and phone connected before getting the weather; 3) You need to =
get the GPS once again once you change your location; - Altitude; - If blue=
tooth is connected; - ambient pressure. - GPS info. - Floors climbed (if av=
alibale) - Steps\/steps goal - Notification\/Alarm count; - Distance - Kcal=
 - Active minute (if avalibale) ...10) Graph above 6:00(Pro): * Heart Rate =
history; * Colorful Heart Rate history; * Step history;11) background(not a=
vailable on fenix6\/fenix6xpro): * black * white(To be developed) * newspap=
er style. We can present many useful info on the newspaper background. DATA=
 AVALIABLE in background info: - Notification\/Alarm count; - Altitude; - I=
f bluetooth is connected; - ambient pressure. - GPS info. - Floors climbed =
(if avalibale) - Steps\/steps goal - Distance - Kcal - Active minute (if av=
alibale)"; var appDescriptionMoreLabel =3D "More"; =E4=B8=AD=E6=96=87=E7=89=
=88=EF=BC=9A -US/apps/c5a22e08-e5af-4e8c-87fd-7573389b32f7To unlock this wa=
tch face for just $2.99: (IMPORTANT: Please attach the serial number for ge=
nerating the unlock code), Please mention the "Serial Number" read in the f=
irst line in the setting page and an unlock code will be sent in order to a=
ctivate it. The unlock code works on the whole life in your watch and still=
 works after upgrade.

Those users who wish to have continued access to the advanced features (the=
"Pro" version) after 60 days, or those who will be using Watch-O-Scope in a=
commercial endeavour (for example, a professional watchmaker) mustpurchase =
an activation key for the Pro version.

Example: if task A uses action Perform Task to start task B, then when task=
 A is run by pressingthe Play button in the task edit screen, %caller1 in t=
ask B will show task=3DA, %caller2 will show ui.The format of each entry in=
 the array is callertype(=3Dcallername(:subcallername))Caller types ares de=
tailed below:profile
a profile (when it's state changes). callername is either enter or exit dep=
ending on whether the profileactivated or deactivated. subcallername is the=
 name of the profile, if it has one, otherwise anonscene
a scene event, with callername being the scene name. For element events, su=
bcallername is the element name. For action bar button presses, subcallerna=
me is the label if one was given. For scene-global events (e.g. Key), subca=
llername is event type ui
the Play button in the task edit screen in the Tasker UIlaunch
clicking a child application icon in the launchernbutton
a notification action button, either from Tasker's permanent notification o=
r one created with one of the Notify actions.callername specifies the label=
 of the button if present.external
an external applicationqstile
a Quick Settings tile. callername specifies the label of the tile.appshort
 an app shortcut (accessed via long-click on the Tasker icon). callername s=
pecifies the label of the tile.task
another task, from a Perform Task action. subcallername is the task name, i=
f it has one, otherwise anonpowermenu
the power menu on Android 11+.Global Built-In VariablesAirplane Mode Status=
(dynamic)
 %AIR
Whether Airplane Mode is on or offAirplane Radios
 %AIRR
A comma-separated list of the radios which will be disabled when entering A=
irplane Mode.
Common radio names are: bluetooth, cell, nfc, wifi, wimax.Battery Level=20
%BATT=20
Current device battery level from 0-100.Bluetooth Status (dynamic)
%BLUE=20
Whether Bluetooth is on or in some other state (off).
Calendar List
%CALS
Newline-separated list of calendars available on the device.
Each entry is in the format calendarprovider:calendarname.
Example usage:Variable Set, %newline,=20
Variable Split, %CALS, %newlineFlash, %CALS(#) calendars, first one is %CAL=
S(1)For the sign=20
, press carriage-return on the keyboard.Calendar Event Title / Descr / Loca=
tion%CALTITLE / %CALDESCR / %CALLOC
The title, description and location of the current calendar event, if there=
 is one. If there are multiple current calendar events thevariables refer t=
o the shortest.
Tip: find other details about the current event(s) using the Misc / Test ac=
tion, specifying %TIMES for the data.Call Name / Number/ Date / Time (In) (=
dynamic, monitored)
%CNAME / %CNUM / %CDATE / %CTIME
The caller name, number, date and time of the current (if a call is in prog=
ress) or last call received.
Caller number is 0 if it's unknown.
Caller name is ? if it's unknown (probably because the caller number was bl=
ocked)and set to the caller number if the contact couldn't be looked up.It'=
s unavailable on Android versions prior to 2.0.Call Name / Number/ Date / T=
ime / Duration (Out)(dynamic, monitored)
%CONAME / %CONUM / %CODATE / %COTIME / %CODUR
The called name, number, date and time of the last (not the current) outgoi=
ng call made.
Called Nameis set to the called number if the contact couldn't be looked up=
.It's unavailable on Android versions prior to 2.0.Cell ID (monitored,dynam=
ic)
%CELLID
The current cell tower ID if known.
If you are using a Cell Near state, note that sometimes the Cell Near state=
 will stay activeeven though %CELLID reports that the tower ID is unknown o=
r invalid; that is because Cell Near onlyresponds to valid IDs to prevent t=
he state becoming inactive e.g. due to a service interruption.
For backwards compatibility, UMTS cells are reported with a GSM prefix.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 differen=
t network types simultaneously. In that case, the value is reported with pr=
eference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.Ce=
ll Signal Strength (monitored,dynamic)
%CELLSIG
The current phone signal level from 0-8 inclusive on a rougly linear scale.=
 On some phones, the level will rise in steps of 2 (0,2,4,6,8). The value i=
s -1 if the valueis unknown or there is e.g. no service.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 differen=
t network types simultaneously. In that case, the value is reported with pr=
eference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.
There is a bug with some Android versions that the reported signal strength=
 is not updated until the device is turned off and on.Cell Service State (m=
onitored,dynamic)
%CELLSRV
The current phone service state. One of unknown, service, noservice, emerge=
ncy, nopower.Clipboard Contents(monitored,dynamic)%CLIP=20
The current contents of the system clipboard. Please note that the clipboar=
d can't be accessed while the device's screen is securely locked.CPU Freque=
ncy
%CPUFREQ=20
The current frequency CPU 0 is running at. See also: CPU Control.CPU Govern=
or
%CPUGOV=20
The current governor controlling the frequency of CPU 0. See also: CPU Cont=
rol.Date=20
%DATE=20
 Current human-readable date.Day of the Month=20
%DAYM=20
Current Day of the Month, starting at 1.Day of the Week=20
%DAYW=20
Current Day of the Week starting with Sunday.Device ID / Manufacturer / Mod=
el / Product
%DEVID / %DEVMAN / %DEVMOD / %DEVPROD
The ID, manufacturer, model and product name of the device.=20
Note: ID is not a uniqueidentifier for the device, but rather for the hardw=
are of the device. See also: %DEVTID.Device Telephony ID
%DEVTID
Returns the unique telephony-based ID for the device (e.g. for GSM the IMEI=
, for CDMA theMEID or ESN).=20
Not available on all devices.Display Brightness%BRIGHT=20
Current screen brightness, 0-255. On some devices, if the Android setting A=
uto Brightness is enabled, thevalue will always be 255.Display Timeout%DTOU=
T=20
Current system screen timeout (seconds).Email From / Cc / Subject / Date / =
Time (dynamic)
%EFROM / %ECC / %ESUBJ / %EDATE / %ETIME
The From, Cc, Subject, Received Date and Received Time of the last email re=
ceivedby the K9 email agent.Free Memory
%MEMF
System free memory remaining in MB.GPS Status
 (monitored,dynamic Gingerbread+)%GPS
Whether the system GPS receiver is on or off.Heart Rate (monitored,dynamic)=
=20
%HEART
 The current detected heart rate in beats per minute.
See also: state Heart Rate.
The value will be negative for no contact (-1), accuracy unreliable (-2) or=
 some other problem (-3)HTTP Response Code / Data / Content Length(dynamic)=
%HTTPR / %HTTPD / %HTTPL
Values from the last HTTP POST/GET action.
If the server doesn't return a content length, %HTTPL will be calculated fr=
om the returneddata where possible.Humidity (monitored,dynamic)=20
%HUMIDITY
 The relative ambient air humidity in percent.
See also: state Humidity.Input Method
%IMETHOD
The current active input method. Consists of 4 parts separated by commas: M=
ethod Name, SubType Name, Mode, Locale.
To access particular parts, use the Variable Split action.Interrupt Mode (d=
ynamic)
%INTERRUPT
Only available on Android 5.0+, requires Tasker's notification access servi=
ce to be enabled, see Android'sSound & Notification settings.

Android 5.0+: the current state of interruptions mode on the device: none, =
priority or all
See Also: action Interrupt Mode

Android 6.0+: the current state of Do Not Disturb mode on the device: none,=
 priority, all or alarms
See Also: action Do Not DisturbKeyguard Status
%KEYG
Whether the Keyguard is on or offLast Application
%LAPP
The name of the application that was in the foreground before the current o=
ne e.g. Maps.Last Photo
%FOTO
The filesystem path to the last photo taken by Tasker or thestandard system=
 camera application.Light Level (monitored,dynamic)
%LIGHT
The last recorded light level in lux.
Note that Android does not return a value until the lightlevel changes, so =
to test the sensor is working you should put it near a bright light initial=
ly.
May not change when the device display is off, see Menu / Prefs / More / Di=
splay Off Monitoring / Light Sensor.Location (dynamic)=20
%LOC
The latitude and longitude of the last GPS fix.
See note.Location Accuracy (dynamic)
%LOCACC
The accuracy in metres of the last GPS fix.
See note.Location Altitude (dynamic)
%LOCALT
The altitude in metres of the last GPS fix, or 0 if unavailable.
See note.Location Speed (dynamic)
%LOCSPD
The speed in metres/second at the last GPS position fix or 0 if unavailable=
.
See note.Location Fix Time Seconds (dynamic)
%LOCTMS
The time in seconds of the last GPS fix. To get age of fix, take this away =
from %TIMES.
This value is not set until an offset of the GPS time from the fixed time h=
asbeen calculated (should be after the first GPS fix) because the value is =
meaninglessuntil that point.
See note.Location (Net) (dynamic)
%LOCN
The latitude and longitude of the last network location fix.
See note.Location Accuracy (Net) (dynamic)
%LOCNACC
The accuracy in metres of the last network location fix.
See note.Location Fix Time (Net) (dynamic)
%LOCNTMS
The time in seconds of the last net location fix. To get age of fix, take t=
his away from %TIMES.
See note.Magnetic Field Strength (monitored,dynamic)
%MFIELD
 The total magnitudes in micro-Teslas of the magnetic fields acting on all =
three axis of the devices sensor.
Updated once per second.
See Also: state Magnetic Field.Music Track (monitored,dynamic)
%MTRACK
The current playing music track, supported for:Tasker actions Music Play an=
d Music Play DirBuilt-in Android music-player, probably not on all devices =
howeverPower AMPBeyondPod (Tasker v1.2.1+)Phantom Music Control ProMedia Ut=
ilitiesPriority: if both Tasker and one of the other supported apps are pla=
ying simultaneously, thenon-Tasker track will be shown. If more than one of=
 the other supported apps is playing simultaneuosly, behaviour is unspecifi=
ed.
Notes: if you don't have a supported player, you could try Phantom Music Co=
ntrol Pro or Media Utilities, which support a lot ofplayers and should pass=
 the info on to Taskerpausing a track clears the variable, unpausing sets i=
t againyour music player may need an option enabled in order to broadcast t=
he track information, or the broadcast may only be available in a 'pro' ver=
sionMuted
%MUTED
Whether the microphone is currently muted (on) or not (off).Night Mode=20
%NIGHT
The current Android Night Mode.
One of on, off or auto.
If auto, Android will decide whether it should be in Night Mode itself.Noti=
fication Title (monitored, dynamic)
%NTITLE
The title of the last notification shown in the status bar. Prior to KitKat=
, requires Tasker's accessibility serverto be running (see Android Accessib=
ility Settings). From KitKat, requires Tasker's Notification Listener servi=
ceto be running instead.=20
In a task running as a result of a Notification or Notification Removed eve=
nt, use variable %evtprm2 insteadof %NTITLE. This is much more reliable and=
 you have access to other parts of the notification (%evtprm3 etc)
Notifications generated by Tasker are not shown.Phone Number
%PNUM
 The current phone number of the device, if it's in service.
On some phones it doesn't work (Android limitation), seems related to the t=
ype of SIM.Pressure (monitored,dynamic)
%PRESSURE
 The current air pressure on the device in millibars.
May not change when the device display is off, see Menu / Prefs / Monitor /=
 Display Off Monitoring / Pressure Sensor.Profiles Active (dynamic)
%PACTIVE
 A comma-separated list of the currently active, named profiles in activati=
on order. Duplicatenames will appear on the list only once. The list always=
 starts and ends with a comma to make matching easier, if it's not empty.Pr=
ofiles Enabled (dynamic)
%PENABLED
A comma-separated list of the currently enabled, named profiles in creation=
 order. Duplicatenames will appear on the list only once. The list always s=
tarts and ends with a comma to make matching easier, if it's not empty.Roam=
ing
%ROAM
on if device is roaming on the current telephone network, otherwise off.Roo=
t Available
%ROOT
yes if root functions are available on this device, otherwise no.Screen (dy=
namic)
%SCREEN
Whether the screen is on (value on) or off (value off).SDK Version
%SDK
The numeric Android SDK versionof the device.Silent Mode (dynamic)
%SILENT
The current state of silent mode: off, vibrate or on.
From Android 5.0+ this variable is intended to only reflect whether the dev=
iceis in vibrate mode (vibrate) or not (any other value), but the on value =
is included for backwardscompatibility and set when the device is not in vi=
brate mode and the interrupt mode is noneor priority.
See Also: variable %INTERRUPT, actions Silent Mode and Interrupt Mode.SIM S=
erial Number
%SIMNUM
The serial number of the SIM card, if one is present and accessible.
If the SIM has not been unlocked it will not be available.SIM State
%SIMSTATE
The current state of the SIM card.
One of unknown, absent, pinrequired, pukrequired, netlocked or ready.Speake=
rphone
%SPHONE
Whether the speakerphone is on or offSpeech (dynamic)
%SPEECH
The current utterance as a result of a Say or Say File action, if applicabl=
e.Tasks Running (dynamic)
%TRUN
A comma-separated list of any named tasks which are currently running. The =
list always starts and ends with a comma to make matching easier, if it's n=
ot empty.Telephone Network (dynamic, monitored)
%TNET
The current telephony network operator the device is using.
May be unreliable on CDMA networksTemperature (monitored,dynamic)=20
%TEMP
 The current ambient temperature in degrees Celsius.=20
May not change when the device display is off, see Menu / Prefs / Monitor /=
 Display Off Monitoring / Temp. Sensor.
See also: state Temperature.Text From/Date/Subject/Time (monitored)
%SMSRF / %SMSRN / %SMSRB / %MMSRS / %SMSRD / %SMSRT
The sender address, name, body, subject, date and time of the last text (SM=
S or MMS) received.
These variables will be empty until the first time a text is received after=
they have been referenced because Tasker does not monitor texts unless it's=
 needed.
Name is set to sender address of no contact could be looked up.It's unavail=
able on Android versions prior to 2.0.
Body (%SMSRB) is only set for SMSs.
Subject (%MMSRS) is only set for MMSs.Time=20
%TIME=20
Current human-readable time separated by a period e.g. 10.59Tether (dynamic=
)
%TETHER=20
A comma-separated list of enabled tethering forms i.e. connections over whi=
ch another device can connect to thisone in order to use its internet conne=
ction.
The possible forms are wifi, usb or bt.
BT will only be present when an actual client is connected via BT for using=
 the devices network connection, whereasthe others will be present as soon =
as the functionality is enabled (Android bug/limitation).Time MilliSeconds=
=20
%TIMEMS
The current time in milliseconds.
 (milliseconds since some time in January, 1970, if you must know).Time Sec=
onds=20
%TIMES
The current time in seconds.
 (seconds since some time in January, 1970, if you must know).UI Mode (moni=
tored,dynamic)
%UIMODE
The current Android UI mode.
One of car, desk, appliance, tv (television), watch, undef (undefined) or n=
ormal.Uptime Seconds=20
%UPS
The number of seconds since the device last booted.Volume - Alarm/Call/DTMF=
/Media/Notification/Ringer/System (dynamic)
%VOLA / %VOLC / %VOLD / %VOLM / %VOLN / %VOLR / %VOLS
Current audio channel volume level.
On some devices, volume changes are not picked up dynamically, on others no=
twhen using the phone app.WiFi Info
%WIFII
When connected to an Access Point (AP), shows human-readable data about the=
 AP. When not connected,show details of the most recent Wifi scan results f=
or nearby APs.
On Android 8.1+, may require basic location services to be enabled in Andro=
id settings.
WiFi Status (dynamic)
 %WIFI
Whether WiFi is on or off.Note: if WiFi is enabling or disabled, in fact an=
ything but enabled, it's classed as off.Wimax Status=20
%WIMAX
Whether Wimax is on or off.Note: if Wimax is enabling or disabled, in fact =
anything but enabled, it's classed as off.Window Label (monitored,dynamic)
%WIN
The label of the current window, which could be a full-screen activity or a=
 dialog.=20
Not set if the label is unknown.
For some windows, the label might be that of the first item in the window e=
.g. a menu entry or even a button.General NotesVariables marked dynamic in =
the list above trigger changes in Variable Value statesand Variable Set eve=
nts whenever their value changes.


 eebf2c3492