Re: Re-Varnishing Wood Veneer

Looks like you’re doing a really thorough job! The sanding approach makes sense given how thin the veneer is, heating or chemical strippers always risk lifting it off. For the varnish, Cabothane Clear Gloss should be fine indoors, just go slow with multiple thin coats to avoid runs or bubbles. If you’re worried about UV, an exterior-grade varnish could help, but it might be overkill unless the car sits in strong sunlight a lot. Overall, sounds like a careful, logical approach. Patience is key here!

-- 
For full context, visit https://www.motorsforum.com/jaguar/re-varnishing-wood-veneer-3464270-.htm