Re: broken sun visor mount

T <[email protected]>
Newsgroups alt.autos.subaru
Organization A noiseless patient Spider
Message-ID <[email protected]>
On 1/24/21 11:28 AM, VanguardLH wrote:
> T <[email protected]> wrote:
> 
>> 2006 Forrester
>>
>> My driver's side sun visor mount is cracked.  I asked
>> the dealership for a replacement.  They wanted to sell
>> me a whole new sun visor for ONE HUNDRED SIXTY
>> U.S. DOLLARS.    YIKES !!!!
>>
>> I told him I would try super glue first.
> 
> You told WHO?  

The guy at the parts counter at the dealership

> First you premise you inquiry that it is YOUR car.

It is my car.  I only have obne car

>  Then
> you reveal that it is someone else's. 

What ????  Perhaps you are confusing me with someone else?

> In your other post, you said you
> "pictured" the damage which means you have not actually seen it, nor is
> it for your vehicle. 

What??  I took it down from the roof and then discovered the damage.

> As is typical of you, you come here for advice and
> then proffer to someone as your own expertise.  Have them come here and
> ask for themself, especially since they can actually see and know what
> is the damage.

What in the world are you going on about?  Do you have a
hangover by chance?

> 
>> Anyone know where I an get a replacement mount?  Or
>> a cheaper solution?
> 
> https://www.1stsubaruparts.com/oem-parts/subaru-sun-visor-92011sa390ne?c=Zz1ib2R5JnM9aW50ZXJpb3ItdHJpbS1yb29mJmw9MSZuPVNlYXJjaCBSZXN1bHRzJmE9c3ViYXJ1Jm89Zm9yZXN0ZXImeT0yMDA2JnQ9eHQtbGltaXRlZCZlPTItNWwtaDQtZ2Fz
> They want $94.  Still damn expensive, but less than your dealer quoted.
> 
> https://www.subarupartsforyou.com/oem-parts/subaru-sun-visor-92011sa390ne?c=Zz1ib2R5JnM9aW50ZXJpb3ItdHJpbS1yb29mJmw9MSZuPVNlYXJjaCBSZXN1bHRzJmE9c3ViYXJ1Jm89Zm9yZXN0ZXImeT0yMDA2JnQ9eHQtbGltaXRlZCZlPTItNWwtaDQtZ2Fz
> They want $72.

Found the subarupartsforyou one.  I will use it as a
last resort.  Or get use to getting hit in the head

> 
> The above are for new OEM parts, not used or refurbished.
> 
> My non-Subaru car shop has a national network to hunt for parts both to
> find them and get good parts.  You might want to check if they'll hunt
> for you, and even what they would charge to put in the used part.  They
> might give you a year warranty.  My car shop knew a guy that would
> replace just a spring in the ignition lock assembly instead of having to
> pay for the entire steering column assembly for the ignition module.
> Another option would be to check with a body repair shop.
> 
> I had a URL to a Subaru parts recycler, but their domain went dead.
> Looks like some moved over to eBay.  That's where I found the crossbars
> for the roof rails (the used car didn't come with them which rendered
> the roof rails useless).  I sold one totalled car to someone whose
> intent was to sell off the parts.  Got more than what the insurance
> would pay (after the deductible).
> 
> https://collisionweek.com/2020/04/17/automotive-recyclers-association-criticizes-subarus-position-recycled-aftermarket-parts/
> Alas, they want you to subscribe and login to read the full article.
> Found more at:
> https://www.a-r-a.org/ara-blog/subarus-positions-against-recycled-and-aftermarket-parts-is-a-consumer-disservice-and-may-violate-federal-law
> 
> I suppose a Subaru-branded dealer has obligations to Subaru on where to
> get repair parts.

And their mark up is something to behold.

> No one else doing collision work has to bother placating Subaru's
> demands unless you want the parts covered by Subaru's insurance (well,
> what's left of it, but I doubt there is any manufacturer warranty left
> on a 2006 Forester).
> 
> Instead of taking a route to find repair parts by first going through a
> Subaru dealer, take a different route by asking at car/body shops,
> hunting online for the parts (new or used), or check out the nearby auto
> salvage yards.  Some of the yards have sites you can search to see if
> they have the part, or to ask them to find it and quote you a price
> since they may also know how to search the national recycler network.


FleeBay or a junk yards.

I am going to try using a couple of Spring Band Clamps
to tighten up the sleeve.  It sound like that part
breaks a lot.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.