Re: Validate email function settings help

On 03 Aug 2026, Ryan X said the following...

 RX>
 RX> I am having trouble with Areafix and having that work. It would be great
 RX> if someone who has done all this could put together a "Mystic BBS: The
 RX> Missing Manual" to cover some of these areas and augment the existing
 RX> wiki as it isn't complete unfortunately. To help new folks in getting
 RX> things setup. I might try and take a crack at it myself once I get
 RX> everything working and work through my issues. I'll also try and get the
 RX> email validation working and report back what I needed to do.
 RX>

There are a bunch of videos by Mystic Guy (Our very own Paul Hayton who runs fsxNet) that explains quite a bit about Mystic. Plus the wiki (Google it), as for Areafix, there really isn't much to tell. TO get all of the commands you can use go into mystic -cfg under networking choose edit areafix help it will pull up the help file from there you can send out areafix requests. Those are sent like this. You choose the node id which you want to send to x:xxx/xx (your uplink), in the subject field put the password you and your uplink have for your BBS, then in the body of the message just type in one of the commands from the help file you want to do, me I usually do a %LINKED first to see what I am hooked up with, then when I get the netmail back listing what I am hooked up to, I will then choose most of the time do a %ALL to link to ALL echos. I use the %ALL first time hooking up to a new uplink. The help file will list all commands..

Hope that helps...


         |11 Bucko |14- |06Wrong Number Family Of BBS' |07- |03www.wrgnbr.com

... Running Windows is better than washing them!