Bootanimation Factory Download

<div>Now, after all of this you'd think to go with the last resort and do a=
 factory reset, which I tried....except after confirming to do a factory re=
set, the screen goes black and then goes back to Android's "No Command" err=
or screen, which is shortly followed up with it going back to the Oculus lo=
go and just sits there. Cool! Can't even do a factory reset!</div><div></di=
v><div></div><div></div><div></div><div></div><div>bootanimation factory do=
wnload</div><div></div><div>Download File: https://t.co/0qOOE1sTc5 </div><d=
iv></div><div></div><div>TLDR: Quest 2 is stuck on the boot logo, holding t=
he power button doesn't work, options in the android menu from power/volume=
 down don't work, power/volume up gives me the "No Command" error and the f=
actory reset option also gives the "No Command" error, so I can't do a fact=
ory reset.</div><div></div><div></div><div>I have factory reset my phone a =
few times, but every time I install Magisk, I get back an old boot animatio=
n that I used from a custom ROM/Kernel I installed and I also get a custom =
Red accent color I installed. How?</div><div></div><div></div><div>By the w=
ay, we noticed you had mentioned running into that "No Command" screen when=
 attempting to factory reset the headset. This indicates that there may hav=
e been a slip up in when going through the reset process. We recommend maki=
ng sure the volume down (-) button is being held at the same time as the po=
wer button. You may need to hold both of these buttons down together for ab=
out a minute until the Boot screen pops up with further options. Here are t=
hose complete factory reset directions (be sure your headset is fully charg=
ed before completing these steps):</div><div></div><div></div><div></div><d=
iv></div><div></div><div></div><div>Hey there  X3MyonderXXX ! Hope you're h=
aving a fantastic day! We're sorry this issue is ongoing for you, as we def=
initely want to get you back to gaming as soon as possible. We hate to hear=
 that you are having trouble with opening the boot loader menu after factor=
y resetting your device. No worries though, we'd love to look into this mat=
ter for you. Shoot us a PM so that we can continue to better assist you wit=
h getting this resolved. At this time, please select our name to get to our=
 profile page, or click here. Next, click "Send a Message" to privately mes=
sage us! Please remember, you must be signed in to the community first to s=
end us a private message. We'll be looking forward to hearing back from you=
 on this.</div><div></div><div></div><div>Why does everything have to be do=
ne by private message? Surely if there is a solution to this, then it would=
 be better if everyone knew about it.</div><div></div><div></div><div></div=
><div>BTW. I discovered I could do a factory reset of the Quest2 using the =
Oculus Mobile App, which fortunately worked. (Using the power button and vo=
lume button held down together did not work - just gave me the "No Command"=
 message.)</div><div></div><div></div><div>Update:</div><div></div><div>I d=
id try with different versions of TWRP and also with older versions of fact=
ory images (like 8.0).</div><div></div><div>At one point I get /e/ boot ani=
mation but after a minute will just restart. Loading did never finish.</div=
><div></div><div></div><div>On my most recently installed Tumbleweed, I see=
 that for around 90% of boots, and the regular fading in background screen =
for the other 10%. On an older factory install on a different computer, I g=
et the regular plymouth background 100% of the time. This computer has Inte=
l graphics (Haswell).</div><div></div><div></div><div>It only happens with =
Tumbleweed installed after 13.2 was released, and even then only 90% of the=
 time. It does not happen with 13.2 (on the same computer). It does not hap=
pen with a factory install last May (and updated through 20150103).</div><d=
iv></div><div></div><div>Brand new 2019 Lincoln MKC with Stock Sync 3 from =
factory. Did upgrade to 3.0 19205 a few weeks back via Lincoln/Ford Sync We=
bsite download to USB. That did not change boot animation but I understand =
that this is a whole different method and the reason for my questions and c=
oncerns.</div><div></div><div></div><div>To install a custom boot animation=
, there are three options, two of which require root access: copy the boota=
nimation.zip to the system/media folder via root file explorer or flash wit=
h the ROM. The third option is to use ADB to copy the file to the data/loca=
l folder.</div><div></div><div></div><div>If you're using an Android custom=
 ROM, the best way to install a custom boot animation for Android is to cop=
y the bootanimation.zip file in the system/media folder of the ROM. Then fl=
ash the custom ROM to your Android device.</div><div></div><div></div><div>=
You can install a custom boot animation Android file to your device by usin=
g ADB to send commands to the device and copy the bootanimation.zip file to=
 the data/local folder. Let's look at the steps to do this.</div><div></div=
><div></div><div>To install a custom boot animation, you need to have root =
access to your device and copy the bootanimation.zip file to the system/med=
ia folder using a file explorer, or ADB to copy the file to the data/local =
folder.</div><div></div><div></div><div>If you're using an Android custom R=
OM, the best way to install a custom boot animation Android is to have the =
bootanimation.zip file in the system/media folder of the ROM, then flash th=
e custom ROM to the Android device.</div><div></div><div></div><div>I have =
the same problem I tried rooting my tab and now its stuck in boot up menu "=
Samsung Galaxy Tab" with "!" at the top left. When I turn the tab off and t=
ry and go in to factory mode it just goes straight to boot logo again. cant=
 do anything...</div><div></div><div></div><div>Here is what I did. Held po=
wer + vol up + home then once the Samsung logo (with device name) came up I=
 let go of the power and waited until I got the Android man with the menu o=
f options. I cleared cache and factory reset. Neither worked. I then plugge=
d it into the charger even thought it was charged. I pushed power + vol up.=
 Then I finally got the set-up wizard. I might have been able to get to tha=
t by just clearing cache. I don't know. My son previously used the tablet f=
or games so I don't know what all he had in there, so it was probably bette=
r I reset it to clear it all out.</div><div></div><div></div><div>My samsun=
g tab is rooted.My problem is when i do factory data reset using volume up =
button then it reboots, now my tab becomes new when i enter my name ect. i =
do next and then it says just a second and then from now it doesn't continu=
e.Please guys help me please.Request.</div><div></div><div></div><div>2) I =
could not enter the ASR (Android System Recovery) mode to try the other sug=
gested options of clearing the cache or wiping the tablet back to factory s=
ettings . This is usually done by holding the power button and volume down =
button (Vol down is the one closest to the power button) simultaneously and=
 releasing the power button when the white Samsung Galaxy Tab 2 10.1 logo c=
omes up. The tablet is supposed to boot into the recovery menu but for me i=
t just continued to the animated Samsung logo and then cycled again like be=
fore. It made no difference if it was charging or on battery. Power + volum=
e up also didn't work.</div><div></div><div></div><div>To create your own b=
oot animation, you will need to use the bootanimation factory software prov=
ided above. This software has been built by XDA member despotovski01 and ca=
n be used to create an animation, package it up and prepare it for install =
on your device all within the application suite.</div><div></div><div></div=
><div>In your file explorer, open the Download folder and tap the factory i=
mages package to open the archive. Open the folder that you'll find inside,=
 the tap the "image-[codename]-[version].zip" file to unpack it as well.</d=
iv><div></div><div></div><div>The idea of enabling OTA updates is attractiv=
e, but after uninstalling Magisk Manager and waiting for an OTA update to c=
omplete, then you are back at Step 2. You still have to download the factor=
y images, patch boot.img, and perform all the other 11 steps.</div><div></d=
iv><div></div><div>Why not skip the OTA, download the latest factory images=
, patch the boot.img, then fastboot flash them all (using the flash-all.bat=
 script supplied with the factory files edited to remove the -w wipe option=
, and substituting the patched boot.img)? Wouldn't that be easier? Any reas=
on that wouldn't work?</div><div></div><div></div><div>Recovery mode and do=
wnload mode are useful for modding and they can come in handy in a pinch. B=
ooting into recovery mode to do a factory reset or wipe cache fan save your=
 Galaxy S20 from a soft brick, and entering download mode lets you install =
firmware with utilities like Odin and Smart Switch.</div><div></div><div></=
div><div>Then I tried to look up solutions online for this model of tablet =
not booting. What I found was that sometimes clearing Android&apos;s cache =
(from recovery, which is still accessible) fixes it, sometimes it needs a f=
actory reset (also done in recovery), and sometimes it requires motherboard=
 replacement because the eMMC (flash memory) is worn out.</div><div></div><=
div></div><div>I have tried clearing the cache several times, which hasn&ap=
os;t helped. I don&apos;t want to do a factory reset because I have un-back=
ed-up data on there that I&apos;d like to recover. And motherboard replacem=
ent (or at least eMMC chip replacement), while it may be necessary to make =
the tablet usable again, would also result in data loss. (Also, I&apos;m pr=
etty sure it&apos;s out of warranty, and I don&apos;t know if the part is e=
ven still stocked.)</div><div></div><div></div><div>Apparently there&apos;s=
 a chance that I can boot a custom recovery without installing it (because =
installing it would require booting and having root) and use that with ADB =
to do a backup, so that&apos;s what I&apos;m planning to try next. Then, if=
 that succeeds, I&apos;ll try a factory reset and see if it boots.</div><di=
v></div><div></div><div>If the backup works but it still won&apos;t boot af=
ter a factory reset, then I guess I can consider just getting a new device =
to replace this one, and/or replacing this one&apos;s motherboard with a Ra=
spberry Pi. I haven&apos;t done much thinking about that yet, and I hope I =
won&apos;t have to.</div><div></div><div></div><div>If your device still fe=
els sluggish, it might be time to do a factory reset. First be sure to back=
 up all your data to the cloud or your home computer. Once you are absolute=
ly positive that you have everything backed up, go to Settings -> Backup & =
Reset and select Factory Data Reset.</div><div></div><div> 31c5a71286</div>