Re: Wurlitzer 3700 era parts needed for a 1050

On Sunday, March 21, 2021 at 8:02:17 AM UTC-4, Ronald Miller wrote:
> Hey, Tony.................. I'd like to ask you about my Wurlitzer 1050, (Sonata), box because I know 
> you have worked on a few in the past: 
> 
> My box keeps repeating the "B" side of every record. When a B side is placed on the turntable, I can 
> see a coil armature energizing in an attempt to push the pin back down, (underneath the record 
> carousel), but when it hits the actuator, (which hits the selection pin), the other side of the actuator 
> appears to begin to slip out of its housing and the pin doesn't get pushed back down. I don't see any 
> way this actuator gets housed. It looks like a 2-inch long flat piece of metal approx 1/4 inch wide 
> and gets struck by a coil that gets energized when the B-side gets placed on the turntable. I can 
> see it happening when I get on my knees and watch by peeking underneath the carousel of records. 
> How does and where does this piece attach to it's housing? 
> 
> Thanks for any help you can offer me! John, if you have any answers, I'm all ears. I already have the 
> manual, but, (as usual), this area is not covered, only a parts number is given. 
> 
> Ron Miller

Can someone tell me if this post shows up (test 3)
Tony Miklos