Re: HDD Issue
Marco Moock <[email protected]>
| Newsgroups | alt.comp.hardware |
|---|---|
| Organization | A noiseless patient Spider |
| Message-ID | <20220210110212.0cb33b09@ryz> |
Am Mittwoch, 09. Februar 2022, um 17:31:12 Uhr schrieb [email protected]: > I have a 10+ year old Dell that came with about 960 GB HDD. I have > since added about 240 GB Kingston SSD to serve as C: and D: , and a > about 500 GB external SSD to handle all the stuff that was on the 960 > HDD . The 960 HDD now serves no usefull purpose, yet continues to fire > up at various odd times. How can I stop this ? I don't see anything in > the BIOS. Running good old and well behaved Windows 7 BTW. In most cases HDD spin up if they get power. If you don't need the disk at all disconnect the SATA power connector. Some disks (not all) offer a jumper to change the behavior how the spin up. They then only spin up if they are requested by a special ATA call IIRC. The main reason for that is that the accumulated inrush currency for many disks is too high, so they can spin up one after the other. I have an Excelstor J640 that supports that. PS: Windows 7 is insecure if you don't have ESU. Maybe think about upgrading to Win 8.1 or Linux.