Audi 2G MMI Update 5570 A4 (8K) - A5 (8T) 8k0 998 961Audi 2G MMI Update 5570 A4 (8K) - A5 (8T) 8k0 9

How to Update Your Audi MMI 2G to Version 5570
If you own an Audi A4 or A5 with MMI 2G high, you may want to update your system to the latest software version. The MMI 2G update 5570 brings many new features and improvements to your Audi infotainment system, such as:

Audi 2G MMI Update 5570 A4 (8K) - A5 (8T) 8k0 998 961Audi 2G MMI Update 5570 A4 (8K) - A5 (8T) 8k0 9
Download File https://t.co/vwSM9Zl3M9




Audi Parking System Plus with audible and graphic display on the screen
DSP (Digital Sound Processing) with higher volume and better sound quality
Navigation announcements can be turned off during phone calls
Volume of the background music during navigation announcements can be adjusted
Height information can be displayed on the navigation map
Route can be followed on the map via the MMI control knob
Crosshairs on input map are easier to use
Additional display arrows for the direction of points of interest
Better labeling of highway exits at low zoom levels
Voice control and navigation of the top destinations are immediately available
Bluetooth: access to more phonebook memory and configurable PIN
If you select a point of interest in navigation, you can dial the number directly
VCS (Voice Control System) is available in conjunction with hands-free kit
Sound Setup: Setting DSP Driver/Symmetric is saved
Bird-view navigation menu is selectable
3D map display
AMI (Audi Music Interface) is now upgradeable to connect iPod, USB sticks, hard drives, etc.
MP3-CD changer support
Bose surround will not forget the surround setting
Trouble-free integration of the new iPod generations

To update your MMI 2G to version 5570, you will need three CDs that contain the update files. You can order them from KUFATEC[^1^] or download them from Uloz.to[^2^]. The CDs are labeled as follows:


CD 1/3: MMI Update 1110 to 5150
CD 2/3: Bluetooth update
CD 3/3: MMI Update 5150 to 5570

The update process is simple and straightforward. You just need to follow these steps:


Start your car and turn on the MMI system.
Insert CD 1/3 into the CD changer slot 1.
The update menu will appear on the screen. Press the big knob to confirm.
The system will check the current software version and show the available update. Press the big knob again to start the update.
The update will take about 30 minutes. Do not turn off the ignition or eject the CD during this time.
When the update is finished, the system will reboot and eject the CD. Remove it from the slot.
Repeat steps 2 to 6 with CD 2/3 and CD 3/3.
After updating with CD 3/3, you will need to enter a PIN code to activate the system. The PIN code is 20103.
You can check the software version by pressing and holding SETUP + RETURN buttons for a few seconds. The version should be HNav_EU_P0022_D1 + HN+_EU_AU210_K0900 + HN+_EU_AU_K0942_3 + D3.
 35727fac0c