Re: Micro$oft Success Built On Sabotage And Bribery

>c186282 <[email protected]>wrote:
>>On 7/2/26 02:23, Jan Panteltje wrote:
>>> rbowman <[email protected]>wrote:
>>>> On Wed, 01 Jul 2026 05:47:40 GMT, Jan Panteltje wrote:
>>>
>>>> Yes, I am receiving my outside weather sensor with a RTL_SDR USB stick
>>>> and the 'rtl_433' program, temperature and humidity.
>>>> It can receive other sensors in the area too if in range.
>>>
>>> What sensor are you using? rtl_443 supports many protocols. I've got a
>>> RTL_SDR and have mostly used it for ADS-C.
>> 
>> A cheap Nexus temperature and humidity sensor that hangs outside,
>> als has an inside box with diplay
>> 
>> 
>> Using:
>>   rtl_433 -p 40 -R19 | weather sensor_to_xgpspc;
>> 
>> The -p is the frequency correction for the RTL stick.
>> 
>> For plane traffic I use dump1090, from this script:
>> 
>> raspberrypi: # cat /usr/local/send_planes_to_xgpspc
>> #!/bin/bash
>> #echo "Usage: send_planes_to_xgpspc device_number"
>> #echo "default device_number is 0"
>> 
>> if [ "$1" == "" ]
>>   then
>>    let device_number=0
>>   else
>>    device_number="$1"
>>   fi
>> 
>> #echo "device_number=$device_number"
>> 
>> #dump1090 --metric --interactive | grep -v  -e ---- -e Flight | awk '// { printf "%s %s %sm %skm/h %sN %sE\n", $1, $2, $3, $4,
>> $5, $6}' | tee planes13.log | netcat -u 192.168.178.73 1079
>> 
>> #dump1090 --metric --interactive | grep -v  -e ---- -e Flight | awk '// { printf "%s %s %sm %skm/h %s %s\n", $1, $2, $3, $4,
>> $5, $6}' | tee /root/planes.log | netcat -u 192.168.178.73 1079
>> 
>> dump1090 --device-index $device_number --metric --interactive | \
>> grep -v  -e ---- -e Flight | \
>> awk '// { printf "%s %s %sm %skm/h %s %s\n", $1, $2, $3, $4, $5, $6}' | \
>> tee /dev/stderr | \
>> netcat -u 192.168.178.73 1079
>> 
>> =================================
>> 
>> This sends the planes info to Raspbery with IP address 192.168.178.73 that runs 'xgpspc' using netcat
>> 
>> netcat is cool for communication between ethernet connected stuff
>> Some have multitasking operating systems ..  I also use computers for several tasks. :-)
>> Easy with those cheap Raspberries.
>> 
>> For air pressure I use a chip that is mounted on a raspi 'hat' I build,
>> that hat also holds compass and attitude chips:
>>   https://panteltje.nl/panteltje/xgpspc/raspi_add_on_compass_accelerometer_pressure_GPS_interface_IMG_4949.JPG
>
>   Hmm ... interesting link. Don't NEED the positional
>   stuff for anything now, but temperature/pressure/RH
>   might be of value.
>
>   Yea, there ARE individual modules, SPI,I2C,1W, but an
>   all-in-one can save a lot of time.
>
>   Made a bunch of 1W temp sensors with the Dallas chip
>   embedded in an epoxy-filled little tube. You can kinda
>   buy those, now.
>
>   Note : you wrap the DS "chip" in metal-foil tape and
>   leave one end kinda free. Then put the thing into the
>   little metal tube and squeeze in the epoxy. The free
>   end will gravitate to the wall of the enclosing tube,
>   fair thermal bond.

Are you familiar with the LM35 temperature sensor chip?