Re: Anyone else seen this.

jkn <[email protected]>
Newsgroups comp.os.linux.misc,uk.d-i-y
Message-ID <[email protected]>
On 04/07/2026 22:05, tony sayer wrote:
> In article <[email protected]>, alan_m
> <[email protected]> scribeth thus
>> On 03/07/2026 16:21, The Natural Philosopher wrote:
>>> Recently my router (Draytek 2726) has been spontaneously rebooting.
>>>
>>> Examination of the logs show a kernel panic caused by 'attempt to
>>> execute an illegal instruction'.
>>>
>>> My assumption, possibly erroneous, is that the actual firmware code is
>>> corrupted
>>> The router is rated only to +45°C but that is the recommended limit for
>>> flash memory, and the room temperature has been up towards 40°C. which
>>> doesn't leave a great deal of margin for router internal heat production.
>>> My query is whether anyone else has seen issues with flash memory in the
>>> recent hear wave.
>>>
>>> Surely phones get hotter than this?
>>>
>>> Genuinely interested in other's experiences.
>>>
>>
>> Not router or flash memory but I had experience of set top boxes
>> overheating and becoming unreliable usually because the feet they fit to
>> the boxes only allows a few millimetres of air to circulate under the
>> box. I've often fitted taller feet and/or put the boxes on a a couple of
>> pieces of 2"x1" timber to increase the air flow beneath the box. Also I
>> don't stack one box on top of another that may be generating heat nor
>> operate the boxes in an enclosed cabinet.
>>
> 
> And.. change the mostly useless power supply Capacitors!..

Is this actually true, specifically referring to Draytek routers? Or 
just to Set Top Boxen (in which case I probably agree)

I have previously looked for reports of such problems with Draytek kit, 
and found none. I also took a look inside my previous Draytek router 
(when I was getting ADSL issues, see uk.d-i-y thread passim) and all the 
caps looked good (visual only check, I agree)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.