Re: Anyone else seen this.
tony sayer <[email protected]>
| Newsgroups | comp.os.linux.misc,uk.d-i-y |
|---|---|
| Organization | Bancom Comms |
| Message-ID | <[email protected]> |
In article <[email protected]>, jkn <[email protected]> scribeth thus >On 04/07/2026 22:05, tony sayer wrote: >> In article <[email protected]>, alan_m >> <[email protected]> scribeth thus >>> On 03/07/2026 16:21, The Natural Philosopher wrote: >>>> Recently my router (Draytek 2726) has been spontaneously rebooting. >>>> >>>> Examination of the logs show a kernel panic caused by 'attempt to >>>> execute an illegal instruction'. >>>> >>>> My assumption, possibly erroneous, is that the actual firmware code is >>>> corrupted >>>> The router is rated only to +45°C but that is the recommended limit for >>>> flash memory, and the room temperature has been up towards 40°C. which >>>> doesn't leave a great deal of margin for router internal heat production. >>>> My query is whether anyone else has seen issues with flash memory in the >>>> recent hear wave. >>>> >>>> Surely phones get hotter than this? >>>> >>>> Genuinely interested in other's experiences. >>>> >>> >>> Not router or flash memory but I had experience of set top boxes >>> overheating and becoming unreliable usually because the feet they fit to >>> the boxes only allows a few millimetres of air to circulate under the >>> box. I've often fitted taller feet and/or put the boxes on a a couple of >>> pieces of 2"x1" timber to increase the air flow beneath the box. Also I >>> don't stack one box on top of another that may be generating heat nor >>> operate the boxes in an enclosed cabinet. >>> >> >> And.. change the mostly useless power supply Capacitors!.. > >Is this actually true, specifically referring to Draytek routers? Or >just to Set Top Boxen (in which case I probably agree) > >I have previously looked for reports of such problems with Draytek kit, >and found none. I also took a look inside my previous Draytek router >(when I was getting ADSL issues, see uk.d-i-y thread passim) and all the >caps looked good (visual only check, I agree) > > > More or less any consumer grade switch mode power supply! The Draytek in question was a, can't remember the blinking number but was a rack mounted jobby. Had a TV the other day the caps after the rectifier where shot oddly enough read fine on a PEEK Cap tester but a couple of new 105 deg ones sorted that. And for that matter any test gear of a certain age, power supply caps change them they don't last forever!.. -- Tony Sayer Man is least himself when he talks in his own person. Give him a keyboard, and he will reveal himself.