Re: [mp2] cannot install from freebsd ports

On Mon, May 23, 2011 at 3:42 AM, am <[email protected]> wrote:
> Hello
>
> I can't install mod_perl2 from FreeBSD 8.2 ports

It looks like FreeBSD ports was very recently updated to 2.0.5:

http://www.freebsd.org/cgi/cvsweb.cgi/ports/www/mod_perl2/pkg-plist

Are you able to specify 2.0.5 in your ports install?  (note I know
little about FreeBSD ports).

>
> mail# make
> ===>   ap22-mod_perl2-2.0.4_2,3 depends on file:
> /usr/local/lib/perl5/site_perl/5.8.9/mach/BSD/Resource.pm - found
> ===>   ap22-mod_perl2-2.0.4_2,3 depends on file: /usr/local/sbin/apxs -
> found
> ===>   ap22-mod_perl2-2.0.4_2,3 depends on file: /usr/local/bin/perl5.8.9 -
> found
> ===>  Configuring for ap22-mod_perl2-2.0.4_2,3
> Reading Makefile.PL args from @ARGV
>   MP_APXS = /usr/local/sbin/apxs
> no conflicting prior mod_perl version found - good.
> Configuring Apache/2.2.17 mod_perl/2.0.4 Perl/v5.8.9
> Checking if your kit is complete...
> Looks good
> Subroutine MY::postamble redefined at ./Makefile.PL line 167.
> Subroutine MY::constants redefined at ./Makefile.PL line 181.
> [   info] generating script t/TEST
> [   info] generating script ./t/cgi-bin/cookies.pl
> [   info] generating script ./t/cgi-bin/next_available_port.pl
> Writing Makefile for Apache::Test
> Checking for File::Spec...ok
> Checking for Cwd...ok
> [   info] generating script t/TEST
> Writing Makefile for ModPerl::Registry
> Writing Makefile for APR::Base64
> Writing Makefile for APR::Brigade
> Writing Makefile for APR::Bucket
> Writing Makefile for APR::BucketAlloc
> Writing Makefile for APR::BucketType
> Writing Makefile for APR::Date
> Writing Makefile for APR::Error
> Writing Makefile for APR::Finfo
> Writing Makefile for APR::IpSubnet
> Writing Makefile for APR::OS
> Writing Makefile for APR::Pool
> Writing Makefile for APR::SockAddr
> Writing Makefile for APR::Socket
> Writing Makefile for APR::Status
> Writing Makefile for APR::String
> Writing Makefile for APR::Table
> Writing Makefile for APR::ThreadMutex
> Writing Makefile for APR::ThreadRWLock
> Writing Makefile for APR::URI
> Writing Makefile for APR::UUID
> Writing Makefile for APR::Util
> Writing Makefile for APR
> Writing Makefile for Apache2::Access
> Writing Makefile for Apache2::CmdParms
> Writing Makefile for Apache2::Command
> Writing Makefile for Apache2::Connection
> Writing Makefile for Apache2::ConnectionUtil
> Writing Makefile for Apache2::Directive
> Writing Makefile for Apache2::Filter
> Writing Makefile for Apache2::FilterRec
> Writing Makefile for Apache2::HookRun
> Writing Makefile for Apache2::Log
> Writing Makefile for Apache2::MPM
> Writing Makefile for Apache2::Module
> Writing Makefile for Apache2::Process
> Writing Makefile for Apache2::RequestIO
> Writing Makefile for Apache2::RequestRec
> Writing Makefile for Apache2::RequestUtil
> Writing Makefile for Apache2::Response
> Writing Makefile for Apache2::ServerRec
> Writing Makefile for Apache2::ServerUtil
> Writing Makefile for Apache2::SubProcess
> Writing Makefile for Apache2::SubRequest
> Writing Makefile for Apache2::URI
> Writing Makefile for Apache2::Util
> Writing Makefile for Apache2
> Writing Makefile for ModPerl::Global
> Writing Makefile for ModPerl::Util
> Writing Makefile for ModPerl
> Writing Makefile for ModPerl::WrapXS
> Unrecognized argument in LIBS ignored: '-pthread'
> Writing Makefile for APR
> Writing Makefile for APR::Const
> Writing Makefile for APR::PerlIO
> Writing Makefile for libaprext
> Writing Makefile for APR_build
> Writing Makefile for Apache2::Const
> Writing Makefile for Apache2_build
> Writing Makefile for ModPerl::Const
> Writing Makefile for ModPerl
> Writing Makefile for ModPerl::XS
> Undefined subroutine &version::_VERSION called at ./Makefile.PL line 697.
> *** Error code 2
>
> Stop in /usr/ports/www/mod_perl2.
>
>
> OS runnnig:
> FreeBSD mail 8.2-RELEASE FreeBSD 8.2-RELEASE #2: Fri Mar  4 18:32:05 EET
> 2011
>
> Perl version:
> mail# perl -V
> Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
>  Platform:
>    osname=freebsd, osvers=8.2-release,
> archname=i386-freebsd-thread-multi-64int
>    uname='freebsd mail 8.2-release freebsd 8.2-release #2: fri mar 4
> 18:32:05 eet 2011 mail@mail :usrobjusrsrcsys i386 '
>    config_args='-sde -Dprefix=/usr/local
> -Darchlib=/usr/local/lib/perl5/5.8.9/mach
> -Dprivlib=/usr/local/lib/perl5/5.8.9
> -Dman3dir=/usr/local/lib/perl5/5.8.9/perl/man/man3
> -Dman1dir=/usr/local/man/man1
> -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.9/mach
> -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.9 -Dscriptdir=/usr/local/bin
> -Dsiteman3dir=/usr/local/lib/perl5/5.8.9/man/man3
> -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl
> -Dcc=cc -Duseshrplib -Dinc_version_list=none
> -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.9/BSDPAN" -Doptimize=-O2
> -pipe -fno-strict-aliasing -Ud_dosuid -Ui_gdbm -Dusethreads=y
> -Dusemymalloc=n -Duse64bitint'
>    hint=recommended, useposix=true, d_sigaction=define
>    usethreads=define use5005threads=undef useithreads=define
> usemultiplicity=define
>    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
>    use64bitint=define use64bitall=undef uselongdouble=undef
>    usemymalloc=n, bincompat5005=undef
>  Compiler:
>    cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.9/BSDPAN"
> -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe
> -I/usr/local/include',
>    optimize='-O2 -pipe -fno-strict-aliasing',
>    cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.9/BSDPAN"
> -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe
> -I/usr/local/include'
>    ccversion='', gccversion='4.2.1 20070719  [FreeBSD]', gccosandvers=''
>    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
>    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
>    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
> lseeksize=8
>    alignbytes=4, prototype=define
>  Linker and Libraries:
>    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
>    libpth=/usr/lib /usr/local/lib
>    libs=-lgdbm -lm -lcrypt -lutil
>    perllibs=-lm -lcrypt -lutil
>    libc=, so=so, useshrplib=true, libperl=libperl.so
>    gnulibc_version=''
>  Dynamic Linking:
>    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='
>  -Wl,-R/usr/local/lib/perl5/5.8.9/mach/CORE'
>    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib'
>
>
> Characteristics of this binary (from libperl):
>  Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
>                        USE_64_BIT_INT USE_FAST_STDIO USE_ITHREADS
>                        USE_LARGE_FILES USE_PERLIO USE_REENTRANT_API
>  Locally applied patches:
>        defined-or
>  Built under freebsd
>  Compiled at May 22 2011 14:07:02
>  @INC:
>    /usr/local/lib/perl5/5.8.9/BSDPAN
>    /usr/local/lib/perl5/site_perl/5.8.9/mach
>    /usr/local/lib/perl5/site_perl/5.8.9
>    /usr/local/lib/perl5/5.8.9/mach
>    /usr/local/lib/perl5/5.8.9
>    .
>
> Thanks in advance
> --
> --------------------------------------------------------------------------
> _____________
>
> Andrei Moraru
> --------------------------------------------------------------------------
>
>