Re: [mp 2.0.5] Early core dump:-( OpenSolaris-x86, Apache 2.2.21 & Perl 5.14.1
Marco Walther <[email protected]>
| Newsgroups | gmane.comp.apache.mod-perl |
|---|---|
| Organization | Oracle Corporation |
| Message-ID | <[email protected]> |
OK, I think I found one problem. The following two defines don't make
it from the Perl make to the CCFLAGS for the mod_perl:-(
`-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64' (They are automatically
added by the Configure for perl and listed in the perl -V output below).
That causes the my_perl structure to be of different sizes/offsets
between perl and mod_perl. That works by accident with Perl 5.10.1 and
finally breaks with 5.14.[12]
Unfortunately even trying to run
/opt/kenai/bin/perl Makefile.PL DEFINE='-D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64'
is not enough:-( The defines still do not make it to the
src/modules/perl/Makefile:-( But after changing that Makefile by hand
and rebuilding, things seem to be working fine.
Thanks,
-- Marco
Some dbx output
----------------- perl 5.10.1 & mod_perl dev from yesterday
---------------------------------------------
[mw79288@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300]
$ ~/dbx.x86 /opt/kenai/bin/perl
dbx.x86: warning: cannot find global initialization file: dbxrc
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.7' in
your .dbxrc
Reading perl
Reading ld.so.1
Reading libsocket.so.1
Reading libnsl.so.1
Reading libdl.so.1
Reading libm.so.2
Reading libpthread.so.1
Reading libc.so.1
(dbx.x86) loadobject -load ./blib/arch/auto/ModPerl/Const/Const.so
Reading Const.so
Loaded loadobject:
/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300/blib/arch/auto/ModPerl/Const/Const.so
(dbx.x86) stop in boot_ModPerl__Const
(2) stop in boot_ModPerl__Const
(dbx.x86) run -I../blib/arch -I../blib/lib \
> t/TEST -bugreport -verbose=0
Running: perl -I../blib/arch -I../blib/lib t/TEST -bugreport -verbose=0
(process id 17713)
Reading Cwd.so
Reading IO.so
Reading Fcntl.so
Reading Util.so
Reading Dumper.so
Reading Glob.so
Reading Socket.so
Reading HiRes.so
Reading librt.so.1
Reading POSIX.so
[warning] Skipping 'set unlimited ulimit for coredumps', since we are
running as a non-root user on Solaris
[warning] forcing re-configuration:
[warning] - configuration generated with old Apache-Test.
t@1 (l@1) stopped in boot_ModPerl__Const at line 89 in file "Const.c"
89 dVAR; dXSARGS;
(dbx.x86) print sizeof(*my_perl)
sizeof(*my_perl) = 2136
(dbx.x86) up
Current function is Perl_pp_entersub
2888 (void)(*CvXSUB(cv))(aTHX_ cv);
(dbx.x86) print sizeof(*my_perl)
sizeof(*my_perl) = 2152
(dbx.x86) where
current thread: t@1
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.10.1/perlmain.c"
dbx.x86: warning: see `help finding-files'
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.10.1/perlmain.c"
[1] boot_ModPerl__Const(my_perl = 0x8241e28, cv = 0x8eedb1c), line 89
in "Const.c"
=>[2] Perl_pp_entersub(my_perl = 0x8241e28), line 2888 in "pp_hot.c"
[3] Perl_runops_debug(my_perl = 0x8241e28), line 1968 in "dump.c"
[4] Perl_call_sv(my_perl = 0x8241e28, sv = 0x8eed58c, flags = 6),
line 2717 in "perl.c"
[5] Perl_call_list(my_perl = 0x8241e28, oldscope = 25, paramList =
0x8ee3c54), line 5264 in "perl.c"
[6] S_process_special_blocks(my_perl = 0x8241e28, fullname =
0x82e2540 "BEGIN", gv = 0x8eed5dc, cv = 0x8eed58c), line 5864 in "op.c"
[7] Perl_newATTRSUB(my_perl = 0x8241e28, floor = 381, o = 0x8ecbf48,
proto = (nil), attrs = (nil), block = 0x8ebe8a8), line 5835 in "op.c"
[8] Perl_utilize(my_perl = 0x8241e28, aver = 1, floor = 381, version
= (nil), idop = 0x8ecbaa8, arg = 0x8ecbb28), line 3886 in "op.c"
[9] Perl_yyparse(my_perl = 0x8241e28), line 659 in "perly.y"
[10] S_doeval(my_perl = 0x8241e28, gimme = 0, startop = (nil),
outside = (nil), seq = 11148U), line 2981 in "pp_ctl.c"
[11] Perl_pp_require(my_perl = 0x8241e28), line 3573 in "pp_ctl.c"
[12] Perl_runops_debug(my_perl = 0x8241e28), line 1968 in "dump.c"
[13] Perl_call_sv(my_perl = 0x8241e28, sv = 0x8ec8b24, flags = 6),
line 2717 in "perl.c"
[14] Perl_call_list(my_perl = 0x8241e28, oldscope = 19, paramList =
0x8ec8994), line 5264 in "perl.c"
[15] S_process_special_blocks(my_perl = 0x8241e28, fullname =
0x82e2540 "BEGIN", gv = 0x8ec8b44, cv = 0x8ec8b24), line 5864 in "op.c"
[16] Perl_newATTRSUB(my_perl = 0x8241e28, floor = 242, o = 0x8ecb9a8,
proto = (nil), attrs = (nil), block = 0x8ebe970), line 5835 in "op.c"
[17] Perl_utilize(my_perl = 0x8241e28, aver = 1, floor = 242, version
= (nil), idop = 0x8ecbb08, arg = 0x8ed0718), line 3886 in "op.c"
[18] Perl_yyparse(my_perl = 0x8241e28), line 659 in "perly.y"
[19] S_doeval(my_perl = 0x8241e28, gimme = 0, startop = (nil),
outside = (nil), seq = 4596U), line 2981 in "pp_ctl.c"
[20] Perl_pp_require(my_perl = 0x8241e28), line 3573 in "pp_ctl.c"
[21] Perl_runops_debug(my_perl = 0x8241e28), line 1968 in "dump.c"
[22] S_run_body(my_perl = 0x8241e28, oldscope = 1), line 2426 in "perl.c"
[23] perl_run(my_perl = 0x8241e28), line 2349 in "perl.c"
[24] main(argc = 6, argv = 0x8047b5c, env = 0x8047b78), at 0x806f180
(dbx.x86)
------------------------------ perl 5.14.1 & mod_perl dev from yesterday
---------------------------------------------
[mw79288@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300]
$ ~/dbx.x86 /opt/kenai/bin/perl
dbx.x86: warning: cannot find global initialization file: dbxrc
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.7' in
your .dbxrc
Reading perl
Reading ld.so.1
Reading libsocket.so.1
Reading libnsl.so.1
Reading libdl.so.1
Reading libm.so.2
Reading libpthread.so.1
Reading libc.so.1
(dbx.x86) loadobject -load ./blib/arch/auto/ModPerl/Const/Const.so
Reading Const.so
Loaded loadobject:
/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300/blib/arch/auto/ModPerl/Const/Const.so
(dbx.x86) stop in boot_ModPerl__Const
(2) stop in boot_ModPerl__Const
(dbx.x86) run -I../blib/arch -I../blib/lib t/TEST -bugreport -verbose=0
Running: perl -I../blib/arch -I../blib/lib t/TEST -bugreport -verbose=0
(process id 2010)
execution completed, exit code is 0
(dbx.x86) quit
[mw79288@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300]
$ ~/dbx.x86 /opt/kenai/bin/perl
dbx.x86: warning: cannot find global initialization file: dbxrc
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.7' in
your .dbxrc
Reading perl
Reading ld.so.1
Reading libsocket.so.1
Reading libnsl.so.1
Reading libdl.so.1
Reading libm.so.2
Reading libpthread.so.1
Reading libc.so.1
(dbx.x86) loadobject -load ./blib/arch/auto/ModPerl/Const/Const.so
Reading Const.so
Loaded loadobject:
/export/home/marcow/src/kenai-packages~subversion/mod_perl/modperl-2.0_20110927151300/blib/arch/auto/ModPerl/Const/Const.so
(dbx.x86) stop in boot_ModPerl__Const
(2) stop in boot_ModPerl__Const
(dbx.x86) run -I../blib/arch -I../blib/lib t/TEST -bugreport -verbose=0
Running: perl -I../blib/arch -I../blib/lib t/TEST -bugreport -verbose=0
(process id 21459)
Reading Cwd.so
Reading IO.so
Reading Fcntl.so
Reading Util.so
Reading Dumper.so
Reading Glob.so
Reading Socket.so
Reading Storable.so
Reading HiRes.so
Reading librt.so.1
Reading POSIX.so
[warning] Skipping 'set unlimited ulimit for coredumps', since we are
running as a non-root user on Solaris
[warning] forcing re-configuration:
[warning] - configuration generated with old Apache-Test.
t@1 (l@1) stopped in boot_ModPerl__Const at line 89 in file "Const.c"
89 dVAR; dXSARGS;
(dbx.x86) print sizeof(*my_perl)
sizeof(*my_perl) = 2216
(dbx.x86) up
Current function is Perl_pp_entersub
3046 CvXSUB(cv)(aTHX_ cv);
(dbx.x86) print sizeof(*my_perl)
sizeof(*my_perl) = 2232
(dbx.x86) where
current thread: t@1
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.14.1/perlmain.c"
dbx.x86: warning: see `help finding-files'
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.14.1/perlmain.c"
[1] boot_ModPerl__Const(my_perl = 0x827f4d0, cv = 0x9244c94), line 89
in "Const.c"
=>[2] Perl_pp_entersub(my_perl = 0x827f4d0), line 3046 in "pp_hot.c"
[3] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[4] Perl_call_sv(my_perl = 0x827f4d0, sv = 0x92446e4, flags = 14),
line 2647 in "perl.c"
[5] Perl_call_list(my_perl = 0x827f4d0, oldscope = 25, paramList =
0x922a4f4), line 4714 in "perl.c"
[6] S_process_special_blocks(my_perl = 0x827f4d0, fullname =
0x83208c8 "BEGIN", gv = 0x9244734, cv = 0x92446e4), line 6462 in "op.c"
[7] Perl_newATTRSUB(my_perl = 0x827f4d0, floor = 339, o = 0x862f9e8,
proto = (nil), attrs = (nil), block = 0x921d600), line 6433 in "op.c"
[8] Perl_utilize(my_perl = 0x827f4d0, aver = 1, floor = 339, version
= (nil), idop = 0x922c770, arg = 0x922c710), line 4317 in "op.c"
[9] Perl_yyparse(my_perl = 0x827f4d0, gramtype = 258), line 361 in
"perly.y"
[10] S_doeval(my_perl = 0x827f4d0, gimme = 2, startop = (nil),
outside = (nil), seq = 13181U), line 3334 in "pp_ctl.c"
[11] Perl_pp_require(my_perl = 0x827f4d0), line 3906 in "pp_ctl.c"
[12] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[13] Perl_call_sv(my_perl = 0x827f4d0, sv = 0x922a4d4, flags = 14),
line 2647 in "perl.c"
[14] Perl_call_list(my_perl = 0x827f4d0, oldscope = 19, paramList =
0x922a294), line 4714 in "perl.c"
[15] S_process_special_blocks(my_perl = 0x827f4d0, fullname =
0x83208c8 "BEGIN", gv = 0x922a434, cv = 0x922a4d4), line 6462 in "op.c"
[16] Perl_newATTRSUB(my_perl = 0x827f4d0, floor = 204, o = 0x922c9b0,
proto = (nil), attrs = (nil), block = 0x9242b88), line 6433 in "op.c"
[17] Perl_utilize(my_perl = 0x827f4d0, aver = 1, floor = 204, version
= (nil), idop = 0x92196b0, arg = 0x921d448), line 4317 in "op.c"
[18] Perl_yyparse(my_perl = 0x827f4d0, gramtype = 258), line 361 in
"perly.y"
[19] S_doeval(my_perl = 0x827f4d0, gimme = 2, startop = (nil),
outside = (nil), seq = 6533U), line 3334 in "pp_ctl.c"
[20] Perl_pp_require(my_perl = 0x827f4d0), line 3906 in "pp_ctl.c"
[21] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[22] S_run_body(my_perl = 0x827f4d0, oldscope = 1), line 2345 in "perl.c"
[23] perl_run(my_perl = 0x827f4d0), line 2268 in "perl.c"
[24] main(argc = 6, argv = 0x8047b5c, env = 0x8047b78), at 0x806cea0
(dbx.x86) down
Current function is boot_ModPerl__Const
89 dVAR; dXSARGS;
(dbx.x86) cont
Assertion failed: SvTYPE(av) == SVt_PVAV, file av.c, line 730
t@1 (l@1) signal ABRT (Abort) in _lwp_kill at 0xfed71997
0xfed71997: _lwp_kill+0x0007: jae _lwp_kill+0x15 [ 0xfed719a5,
.+0xe ]
Current function is Perl_av_len
730 assert(SvTYPE(av) == SVt_PVAV);
(dbx.x86) where
current thread: t@1
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.14.1/perlmain.c"
dbx.x86: warning: can't find file
"/export/home/marcow/src/kenai-packages~subversion/perl/perl-5.14.1/perlmain.c"
[1] _lwp_kill(0x1, 0x6, 0x8046314, 0xfed6a9ea), at 0xfed71997
[2] thr_kill(0x1, 0x6, 0x8046314, 0xfed1ab6e), at 0xfed6aa0c
[3] raise(0x6, 0x0, 0x8046364, 0xfecf1fea), at 0xfed1ab7a
[4] abort(0x65737341, 0x6f697472, 0x6166206e, 0x64656c69, 0x7653203a,
0x45505954, 0x29766128, 0x203d3d20, 0x5f745653, 0x56415650, 0x6966202c,
0x6120656c, 0x2c632e76, 0x6e696c20, 0x33372065, 0x8000a30, 0x80464e8,
0x0, 0x10, 0x0), at 0xfecf200a
[5] _assert(0x825e350, 0x825e348, 0x2da), at 0xfecf225a
=>[6] Perl_av_len(my_perl = 0x827f4d0, av = 0x8283684), line 730 in "av.c"
[7] Perl_call_list(my_perl = 0x827f4d0, oldscope = 33, paramList =
0x8283684), line 4688 in "perl.c"
[8] boot_ModPerl__Const(my_perl = 0x827f4d0, cv = 0x9244c94), line
113 in "Const.c"
[9] Perl_pp_entersub(my_perl = 0x827f4d0), line 3046 in "pp_hot.c"
[10] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[11] Perl_call_sv(my_perl = 0x827f4d0, sv = 0x92446e4, flags = 14),
line 2647 in "perl.c"
[12] Perl_call_list(my_perl = 0x827f4d0, oldscope = 25, paramList =
0x922a4f4), line 4714 in "perl.c"
[13] S_process_special_blocks(my_perl = 0x827f4d0, fullname =
0x83208c8 "BEGIN", gv = 0x9244734, cv = 0x92446e4), line 6462 in "op.c"
[14] Perl_newATTRSUB(my_perl = 0x827f4d0, floor = 339, o = 0x862f9e8,
proto = (nil), attrs = (nil), block = 0x921d600), line 6433 in "op.c"
[15] Perl_utilize(my_perl = 0x827f4d0, aver = 1, floor = 339, version
= (nil), idop = 0x922c770, arg = 0x922c710), line 4317 in "op.c"
[16] Perl_yyparse(my_perl = 0x827f4d0, gramtype = 258), line 361 in
"perly.y"
[17] S_doeval(my_perl = 0x827f4d0, gimme = 2, startop = (nil),
outside = (nil), seq = 13181U), line 3334 in "pp_ctl.c"
[18] Perl_pp_require(my_perl = 0x827f4d0), line 3906 in "pp_ctl.c"
[19] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[20] Perl_call_sv(my_perl = 0x827f4d0, sv = 0x922a4d4, flags = 14),
line 2647 in "perl.c"
[21] Perl_call_list(my_perl = 0x827f4d0, oldscope = 19, paramList =
0x922a294), line 4714 in "perl.c"
[22] S_process_special_blocks(my_perl = 0x827f4d0, fullname =
0x83208c8 "BEGIN", gv = 0x922a434, cv = 0x922a4d4), line 6462 in "op.c"
[23] Perl_newATTRSUB(my_perl = 0x827f4d0, floor = 204, o = 0x922c9b0,
proto = (nil), attrs = (nil), block = 0x9242b88), line 6433 in "op.c"
[24] Perl_utilize(my_perl = 0x827f4d0, aver = 1, floor = 204, version
= (nil), idop = 0x92196b0, arg = 0x921d448), line 4317 in "op.c"
[25] Perl_yyparse(my_perl = 0x827f4d0, gramtype = 258), line 361 in
"perly.y"
[26] S_doeval(my_perl = 0x827f4d0, gimme = 2, startop = (nil),
outside = (nil), seq = 6533U), line 3334 in "pp_ctl.c"
[27] Perl_pp_require(my_perl = 0x827f4d0), line 3906 in "pp_ctl.c"
[28] Perl_runops_debug(my_perl = 0x827f4d0), line 2266 in "dump.c"
[29] S_run_body(my_perl = 0x827f4d0, oldscope = 1), line 2345 in "perl.c"
[30] perl_run(my_perl = 0x827f4d0), line 2268 in "perl.c"
[31] main(argc = 6, argv = 0x8047b5c, env = 0x8047b78), at 0x806cea0
(dbx.x86)
------------------------------ Partial diff between the two versions of
the *my_perl ------------------
--- boot 2011-09-28 10:54:09.719088302 -0700
+++ call 2011-09-28 10:55:12.679088135 -0700
@@ -26,233 +26,231 @@
Istatbuf = {
st_dev = 47775762U
st_pad1 = (0, 0, 0)
- st_ino = 10266116U
- st_mode = 0
- st_nlink = 33188U
- st_uid = 1U
- st_gid = 179288U
- st_rdev = 0
- st_pad2 = (-1, 0)
- st_size = 0
- st_pad3 = 5112
+ st_ino = 10266116ULL
+ st_mode = 33188U
+ st_nlink = 1U
+ st_uid = 179288U
+ st_gid = 0
+ st_rdev = 4294967295U
+ st_pad2 = (0, 0)
+ st_size = 5112LL
.....
On 09/27/2011 11:21 AM, Marco Walther wrote:
> On 09/27/2011 10:50 AM, Fred Moyer wrote:
>> Have you tried 2.0.5?
> Yes, from below:
>
> ---------------
> *** mod_perl version 2.000005
>
> *** using
> /export/home/marcow/src/kenai-packages~subversion/mod_perl/mod_perl-2.0.5/lib/Apache2/BuildConfig.pm
>
>
> ------------------
>
> I'm trying to switch from Perl 5.10.1 & mod_perl 2.0.4 --> Perl 5.14.1
> (probably .2) & mod_perl 2.0.5 but so far that does not work:-(
>
> Thanks,
> -- Marco
>
>> On Wednesday, September 21, 2011 at 7:24 PM, Marco Walther wrote:
>>
>>> -------------8<---------- Start Bug Report ------------8<----------
>>> 1. Problem Description:
>>>
>>> Apache with enabled mod_perl runs into a SIGSEGV quickly during the
>>> initialization of mod_perl:-( This run is from a worker-mpm but the
>>> same
>>> happens with the prefork-mpm.
>>>
>>> We were running mod_perl 2.0.4 + Perl 5.10.1 successfully before.
>>>
>>> Any idea??
>>>
>>> Thanks,
>>> -- Marco
>>>
>>> 2. Used Components and their Configuration:
>>>
>>> *** mod_perl version 2.000005
>>>
>>> *** using
>>> /export/home/marcow/src/kenai-packages~subversion/mod_perl/mod_perl-2.0.5/lib/Apache2/BuildConfig.pm
>>>
>>>
>>> *** Makefile.PL options:
>>> MP_APR_LIB => aprext
>>> MP_APXS => /opt/kenai/apache2/bin/apxs
>>> MP_COMPAT_1X => 1
>>> MP_GENERATE_XS => 1
>>> MP_LIBNAME => mod_perl
>>> MP_USE_DSO => 1
>>>
>>>
>>> *** /opt/kenai/apache2/bin/httpd -V
>>> Server version: Apache/2.2.21 (Unix)
>>> Server built: Sep 14 2011 22:10:21
>>> Server's Module Magic Number: 20051115:30
>>> Server loaded: APR 1.4.5, APR-Util 1.3.12
>>> Compiled using: APR 1.4.5, APR-Util 1.3.12
>>> Architecture: 32-bit
>>> Server MPM: Worker
>>> threaded: yes (fixed thread count)
>>> forked: yes (variable process count)
>>> Server compiled with....
>>> -D APACHE_MPM_DIR="server/mpm/worker"
>>> -D APR_HAS_SENDFILE
>>> -D APR_HAS_MMAP
>>> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>>> -D APR_USE_PROC_PTHREAD_SERIALIZE
>>> -D APR_USE_PTHREAD_SERIALIZE
>>> -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>>> -D APR_HAS_OTHER_CHILD
>>> -D AP_HAVE_RELIABLE_PIPED_LOGS
>>> -D DYNAMIC_MODULE_LIMIT=128
>>> -D HTTPD_ROOT="/opt/kenai/apache2"
>>> -D SUEXEC_BIN="/opt/kenai/apache2/bin/suexec"
>>> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
>>> -D DEFAULT_ERRORLOG="logs/error_log"
>>> -D AP_TYPES_CONFIG_FILE="conf/mime.types"
>>> -D SERVER_CONFIG_FILE="conf/httpd.conf"
>>>
>>> *** /usr/bin/ldd /opt/kenai/apache2/bin/httpd
>>> libm.so.2 => /usr/lib/libm.so.2
>>> libaprutil-1.so.0 => /opt/kenai/apache2/lib/libaprutil-1.so.0
>>> libdb-4.6.so => /opt/kenai/lib/libdb-4.6.so
>>> libresolv.so.2 => /usr/lib/libresolv.so.2
>>> libexpat.so.1 => /usr/lib/libexpat.so.1
>>> libiconv.so.2 => /opt/kenai/lib/libiconv.so.2
>>> libapr-1.so.0 => /opt/kenai/apache2/lib/libapr-1.so.0
>>> libuuid.so.1 => /usr/lib/libuuid.so.1
>>> libsendfile.so.1 => /usr/lib/libsendfile.so.1
>>> libsocket.so.1 => /usr/lib/libsocket.so.1
>>> libnsl.so.1 => /usr/lib/libnsl.so.1
>>> libpthread.so.1 => /usr/lib/libpthread.so.1
>>> libc.so.1 => /usr/lib/libc.so.1
>>> libdlpi.so.1 => /lib/libdlpi.so.1
>>> libmp.so.2 => /lib/libmp.so.2
>>> libmd.so.1 => /lib/libmd.so.1
>>> libscf.so.1 => /lib/libscf.so.1
>>> libinetutil.so.1 => /lib/libinetutil.so.1
>>> libdladm.so.1 => /lib/libdladm.so.1
>>> libuutil.so.1 => /lib/libuutil.so.1
>>> libgen.so.1 => /lib/libgen.so.1
>>> libdevinfo.so.1 => /lib/libdevinfo.so.1
>>> librcm.so.1 => /lib/librcm.so.1
>>> libnvpair.so.1 => /lib/libnvpair.so.1
>>> libexacct.so.1 => /usr/lib/libexacct.so.1
>>> libkstat.so.1 => /lib/libkstat.so.1
>>> libcurses.so.1 => /lib/libcurses.so.1
>>> libsec.so.1 => /lib/libsec.so.1
>>> libavl.so.1 => /lib/libavl.so.1
>>> libidmap.so.1 => /usr/lib/libidmap.so.1
>>> libldap.so.5 => /usr/lib/libldap.so.5
>>> libsldap.so.1 => /usr/lib/libsldap.so.1
>>> libadutils.so.1 => /usr/lib/libadutils.so.1
>>> libsasl.so.1 => /usr/lib/libsasl.so.1
>>> libnspr4.so => /usr/lib/mps/libnspr4.so
>>> libplc4.so => /usr/lib/mps/libplc4.so
>>> libnss3.so => /usr/lib/mps/libnss3.so
>>> libssl3.so => /usr/lib/mps/libssl3.so
>>> librt.so.1 => /lib/librt.so.1
>>> libdl.so.1 => /lib/libdl.so.1
>>> libsoftokn3.so => /usr/lib/mps/libsoftokn3.so
>>> libplds4.so => /usr/lib/mps/libplds4.so
>>> libthread.so.1 => /lib/libthread.so.1
>>> libbsm.so.1 => /lib/libbsm.so.1
>>> libsecdb.so.1 => /lib/libsecdb.so.1
>>> libtsol.so.2 => /lib/libtsol.so.2
>>>
>>>
>>> *** (apr|apu)-config linking info
>>>
>>> -L/opt/kenai/apache2/lib -laprutil-1 -lldap -llber -ldb-4.6
>>> -lexpat -liconv -L/opt/kenai/lib -R/opt/kenai/lib
>>> -L/opt/kenai/apache2/lib -R/opt/kenai/apache2/lib
>>> -L/opt/kenai/apache2/lib -lapr-1 -luuid -lsendfile -lsocket -lnsl
>>> -lpthread
>>>
>>>
>>>
>>> *** /opt/kenai/bin/perl -V
>>> Summary of my perl5 (revision 5 version 14 subversion 1) configuration:
>>>
>>> Platform:
>>> osname=solaris, osvers=2.11, archname=i86pc-solaris-thread-multi
>>> uname='sunos kexdev03z1 5.11 snv_111b i86pc i386 i86pc '
>>> config_args='-Dprefix=/opt/kenai -A
>>> prepend:ccflags=-I/opt/kenai/include -A prepend:libpth=/opt/kenai/lib
>>> /opt/SUNWspro/prod/lib/sparc/ /opt/SUNWspro/prod/lib/ /lib /usr/lib -A
>>> prepend:ldflags=-L/opt/kenai/lib -R/opt/kenai/lib -Doptimize=-g -U
>>> locincpth= -U loclibpth= -U glibpth= -Dusethreads -d -e'
>>> hint=recommended, useposix=true, d_sigaction=define
>>> useithreads=define, usemultiplicity=define
>>> useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
>>> use64bitint=undef, use64bitall=undef, uselongdouble=undef
>>> usemymalloc=n, bincompat5005=undef
>>> Compiler:
>>> cc='/opt/SUNWspro/bin/cc', ccflags ='-D_REENTRANT
>>> -I/opt/kenai/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>>> -DPERL_USE_SAFE_PUTENV',
>>> optimize='-g',
>>> cppflags='-D_REENTRANT -I/opt/kenai/include'
>>> ccversion='Sun C 5.10 SunOS_i386 2009/06/03', gccversion='',
>>> gccosandvers=''
>>> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
>>> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
>>> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
>>> lseeksize=8
>>> alignbytes=4, prototype=define
>>> Linker and Libraries:
>>> ld='/opt/SUNWspro/bin/cc', ldflags ='-L/opt/kenai/lib
>>> -R/opt/kenai/lib -L/lib -L/usr/lib '
>>> libpth=/opt/kenai/lib /opt/SUNWspro/prod/lib/ /lib /usr/lib
>>> libs=-lsocket -lnsl -ldb -ldl -lm -lpthread -lc
>>> perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
>>> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
>>> gnulibc_version=''
>>> Dynamic Linking:
>>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
>>> cccdlflags='-KPIC', lddlflags='-G -L/opt/kenai/lib -R/opt/kenai/lib
>>> -L/lib -L/usr/lib'
>>>
>>>
>>> Characteristics of this binary (from libperl):
>>> Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
>>> PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
>>> PERL_PRESERVE_IVUV PERL_USE_SAFE_PUTENV
>>> USE_ITHREADS
>>> USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
>>> USE_REENTRANT_API
>>> Built under solaris
>>> Compiled at Aug 18 2011 19:28:54
>>> %ENV:
>>> PERL_LWP_USE_HTTP_10="1"
>>> @INC:
>>> /opt/kenai/lib/perl5/site_perl/5.14.1/i86pc-solaris-thread-multi
>>> /opt/kenai/lib/perl5/site_perl/5.14.1
>>> /opt/kenai/lib/perl5/5.14.1/i86pc-solaris-thread-multi
>>> /opt/kenai/lib/perl5/5.14.1
>>> /opt/kenai/lib/perl5/site_perl
>>> .
>>> [root@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl]
>>>
>>> # ldd /opt/kenai/bin/perl
>>> libsocket.so.1 => /lib/libsocket.so.1
>>> libnsl.so.1 => /lib/libnsl.so.1
>>> libdl.so.1 => /lib/libdl.so.1
>>> libm.so.2 => /lib/libm.so.2
>>> libpthread.so.1 => /lib/libpthread.so.1
>>> libc.so.1 => /lib/libc.so.1
>>> libmp.so.2 => /lib/libmp.so.2
>>> libmd.so.1 => /lib/libmd.so.1
>>> libscf.so.1 => /lib/libscf.so.1
>>> libuutil.so.1 => /lib/libuutil.so.1
>>> libgen.so.1 => /lib/libgen.so.1
>>>
>>> [root@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl]
>>>
>>> # ldd mod_perl-2.0.5/src/modules/perl/mod_perl.so
>>> libsocket.so.1 => /lib/libsocket.so.1
>>> libnsl.so.1 => /lib/libnsl.so.1
>>> libdl.so.1 => /lib/libdl.so.1
>>> libm.so.2 => /lib/libm.so.2
>>> libpthread.so.1 => /lib/libpthread.so.1
>>> libc.so.1 => /lib/libc.so.1
>>> libmp.so.2 => /lib/libmp.so.2
>>> libmd.so.1 => /lib/libmd.so.1
>>> libscf.so.1 => /lib/libscf.so.1
>>> libuutil.so.1 => /lib/libuutil.so.1
>>> libgen.so.1 => /lib/libgen.so.1
>>>
>>> *** Packages of interest status:
>>>
>>> Apache2 : -
>>> Apache2::Request : -
>>> CGI : 3.55
>>> ExtUtils::MakeMaker: 6.57_05
>>> LWP : 6.02
>>> mod_perl : -
>>> mod_perl2 : -
>>>
>>>
>>> 3. This is the core dump trace: (if you get a core dump):
>>>
>>> [root@kexdev03z1:/export/home/marcow/src/kenai-packages~subversion/mod_perl]
>>>
>>> # ~mw79288/dbx.x86 /opt/kenai/apache2/bin/httpd
>>> /var/cores/httpd-worker.20302-1316656799
>>> dbx.x86: warning: cannot find global initialization file: dbxrc
>>> For information about new features see `help changes'
>>> To remove this message, put `dbxenv suppress_startup_message 7.7' in
>>> your .dbxrc
>>> Reading httpd
>>> core file header read successfully
>>> Reading ld.so.1
>>> Reading libm.so.2
>>> Reading libaprutil-1.so.0.3.12
>>> Reading libdb-4.6.so
>>> Reading libresolv.so.2
>>> Reading libexpat.so.1.5.2
>>> Reading libiconv.so.2.4.0
>>> Reading libapr-1.so.0.4.5
>>> Reading libuuid.so.1
>>> Reading libsendfile.so.1
>>> Reading libsocket.so.1
>>> Reading libnsl.so.1
>>> Reading libpthread.so.1
>>> Reading libc.so.1
>>> Reading mod_mime.so
>>> Reading mod_alias.so
>>> Reading mod_perl.so
>>> Reading libdl.so.1
>>> Reading libscf.so.1
>>> Reading libuutil.so.1
>>> Reading libgen.so.1
>>> Reading libmd.so.1
>>> Reading libmp.so.2
>>> t@1 (l@1) program terminated by signal SEGV (no mapping at the fault
>>> address)
>>> Current function is modperl_env_clear
>>> 100 HV *hv = ENVHV;
>>> (dbx.x86) where
>>> current thread: t@1
>>> =>[1] modperl_env_clear(my_perl = 0x83ac218), line 100 in
>>> "modperl_env.c"
>>> [2] modperl_boot(my_perl = 0x83ac218, data = (nil)), line 100 in
>>> "mod_perl.c"
>>> [3] Perl_leave_scope(my_perl = 0x83ac218, base = 0), line 952 in
>>> "scope.c"
>>> [4] Perl_pop_scope(my_perl = 0x83ac218), line 110 in "scope.c"
>>> [5] S_parse_body(my_perl = 0x83ac218, env = (nil), xsinit =
>>> 0xfe664ad0 = &`mod_perl.so`mod_perl.c`modperl_xs_init(PerlInterpreter
>>> *my_perl)), line 2218 in "perl.c"
>>> [6] perl_parse(my_perl = 0x83ac218, xsinit = 0xfe664ad0 =
>>> &`mod_perl.so`mod_perl.c`modperl_xs_init(PerlInterpreter *my_perl),
>>> argc
>>> = 6, argv = 0x8455280, env = (nil)), line 1613 in "perl.c"
>>> [7] modperl_startup(s = 0x80d0068, p = 0x80ca538), line 255 in
>>> "mod_perl.c"
>>> [8] modperl_startup(s = 0x80d0068, p = 0x80ca538), line 207 in
>>> "mod_perl.c"
>>> [9] modperl_init(base_server = 0x80d0068, p = 0x80ca538), line 458 in
>>> "mod_perl.c"
>>> [10] modperl_hook_init(pconf = 0x80ca538, plog = (nil), ptemp =
>>> (nil), s = 0x80d0068), line 631 in "mod_perl.c"
>>> [11] modperl_run(), line 645 in "mod_perl.c"
>>> [12] modperl_cmd_load_module(parms = 0x80478f0, mconfig = 0x8111ef8,
>>> arg = 0x83437c8 "TestCompat::apache_module"), line 666 in
>>> "modperl_cmd.c"
>>> [13] ap_walk_config_sub(0x83437a8, 0x80478f0, 0x80fdd20, 0x39663763),
>>> at 0x808508a
>>> [14] ap_walk_config(0x8112378, 0x80478f0, 0x80fdd20, 0x83715ec), at
>>> 0x8085128
>>> [15] ap_process_config_tree(0x80d0068, 0x8112378, 0x80ca538,
>>> 0x80fa5f8), at 0x8085e8b
>>> [16] main(0x9, 0x80479cc, 0x80479f4, 0xfeffb7b4), at 0x807194d
>>> (dbx.x86)
>>>
>>>
>>> This report was generated by t/REPORT on Thu Sep 22 02:09:12 2011 GMT.
>>>
>>> -------------8<---------- End Bug Report --------------8<----------
>>
>