Re: [mod_perl2]: Install error with Makefile.PL - uninitialized value at TestRun.pm
Daniel Boerner <[email protected]>
| Newsgroups | gmane.comp.apache.mod-perl |
|---|---|
| Message-ID | <CAOCfoG6j=dj3GQ8O=5LCmR_utvy_Saon2tFNuo40g3+1RnAcSg@mail.gmail.com> |
Responding to Susan (about not a static build with large file support,
thread support...) here my
perl5 -V:
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Platform:
osname=linux, osvers=2.6.32-5-amd64, archname=x86_64-linux-thread-multi
uname='linux oak 2.6.32-5-amd64 #1 smp sun may 6 04:00:17 utc 2012
x86_64 gnulinux '
config_args='-des -Dprefix=/home/dani/perl -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing
-pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib /lib64
/usr/lib64
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.11.3.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib
-fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Built under linux
Compiled at Jul 8 2012 12:59:50
@INC:
/home/dani/perl/lib/site_perl/5.14.2/x86_64-linux-thread-multi
/home/dani/perl/lib/site_perl/5.14.2
/home/dani/perl/lib/5.14.2/x86_64-linux-thread-multi
/home/dani/perl/lib/5.14.2
.
Best,
Daniel
2012/7/16 Susan <[email protected]>
> **
>
> Ok. I finally got it to glue together with apache 2.2.22, perl 5.14.2, and
> mod_perl 2.0.7. The perl can probably be upgraded to newest.
>
> However, mod_perl 2.0.7 will NOT do a static build (as daniel states
> below, tho that looks real good otherwise) with large file support enabled
> and no perl thread support enabled. It throws constant errors in various
> places -> error: unknown type name 'off64_t'.
>
> So it appears it has to be built as a dso under those circumstances, and
> that goes pretty smoothly with httpd installed first, --with-mpm=prefork
> and any other apache options enabled, as a dso it or something else can be
> unloaded anyway if memory issues with ssl, for instance, are an issue as
> the mod_perl (1) docs state.
>
> Fred's patch is a lifesaver, so patch first:
>
> Index: lib/Apache/TestRun.pm
> ===================================================================
> --- lib/Apache/TestRun.pm(revision 1359945)
> +++ lib/Apache/TestRun.pm(working copy)
> @@ -1097,6 +1097,9 @@
>
>
> my %args = @Apache::TestMM::Argv;
> while (my($k, $v) = each %args) {
> + unless (defined $v) {
> + die "key $k has no value";
> + }
>
> $v =~ s/\|/\\|/g;
> $body .= "\n\$Apache::TestConfig::Argv{'$k'} = q|$v|;\n";
> }
>
>
>
> and the makefile cmd I used is:
>
> [mod_perl-2.0.7 ]# perl Makefile.PL MP_USE_DSO=1
> MP_APR_CONFIG=/usr/local/bin/apr-1-config MP_APXS=/srv/httpd/sbin/apxs
>
>
> configures without error, 'make' without error, 'make test' without error,
> and then 'make install'.
>
>
>
> thanks for your help!
>
> Susan
>
>
>
>
>
> =============================================================
>
> On 2012-07-15 09:40, Daniel Boerner wrote:
>
> Hi Fred, Hi Todd
> I just subscribed to this list and still don't know how to link my message
> to your thread from July 10th. Sorry.
> I just want to show you my workaround of the same problem: "Install error
> with Makefile.PL - uninitialized value at TestRun.pm"
>
> Here my proceedings aiming at a statically mod_perl Apache with Perl
> 5.14.2 on Debian "squeeze" Linux:
>
> cd ~/src
> tar -xvzf perl-5.14.2.tar.gz
> cd perl-5.14.2
> mkdir "$HOME/perl"
> ./Configure -des -Dprefix="$HOME/perl" -Dusethreads
> make
> make test
> make install
>
> Making some symlinks... (basically appending a '5' to the name of each
> executable in the newly installed $HOME/perl/bin).
> su ./perl_version_links.pl /home/dani /usr/local/bin
>
> Some prerequisites:
> cpan5
> install CPAN
> reload cpan5
> exit
>
> cpan5
> install YAML
> install LWP
> install CGI
> install Chatbot::Eliza
> install Compress::Zlib
> install Devel::CoreStack
> install Devel::Symdump
> install Digest::MD5
> install IPC::Run3
> exit
>
>
> And now, making up a statically mod_perl Apache server:
>
> cd ~/src
> tar -xvzf httpd-2.2.22.tar.gz
> tar -xvzf mod_perl-2.0-current.tar.gz
>
> mkdir "$HOME/apache2"
> cd mod_perl-2.0.7/
> perl5 Makefile.PL MP_USE_STATIC=1 MP_AP_PREFIX="$HOME/src/httpd-2.2.22"
> MP_AP_CONFIGURE="--prefix=$HOME/apache2 --with-mpm=prefork" MP_COMPAT_1X=0
>
> Error:
> ERROR from evaluation of
> /home/dani/src/mod_perl-2.0.7/Apache-Reload/Makefile.PL: Use of
> uninitialized value $v in concatenation (.) or string at
> Apache-Test/lib/Apache/TestRun.pm line 1100
>
> Locating line 1100 and adding two print statements just before it:
>
> my %args = @Apache::TestMM::Argv;
> while (my($k, $v) = each %args) {
> print "--> $k\n";
> print "---> $v\n";
> $v =~ s/\|/\\|/g;
> $body .= "\n\$Apache::TestConfig::Argv{'$k'} = q|$v|;\n";
> }
>
> Running again:
> perl5 Makefile.PL MP_USE_STATIC=1 MP_AP_PREFIX="$HOME/src/httpd-2.2.22"
> MP_AP_CONFIGURE="--prefix=$HOME/apache2 --with-mpm=prefork" MP_COMPAT_1X=0
>
> Result:
> Configuring Apache/2.2.22 mod_perl/2.0.7 Perl/v5.14.2
> --> httpd
> ---> /home/dani/src/httpd-2.2.22/httpd
> --> apxs
> ERROR from evaluation of
> /home/dani/src/mod_perl-2.0.7/Apache-Reload/Makefile.PL: Use of
> uninitialized value $v in concatenation (.) or string at
> Apache-Test/lib/Apache/TestRun.pm line 1101.
>
> Ok. As I'm building mod_perl statically, I don't need apxs so I apply the
> following workaround: enclose lines 1100 and 1101 in an if-block testing if
> $v is defined:
>
> my %args = @Apache::TestMM::Argv;
> while (my($k, $v) = each %args) {
> if (defined $v) {
> $v =~ s/\|/\\|/g;
> $body .= "\n\$Apache::TestConfig::Argv{'$k'} = q|$v|;\n";
> }
> }
>
> Now, no error and I could proceed with make:
>
> make
> make test
>
> ...
> All tests successful.
> Files=242, Tests=2469, 427 wallclock secs ( 4.71 usr 0.94 sys + 372.71
> cusr 45.48 csys = 423.84 CPU)
> Result: PASS
> [warning] server localhost:8529 shutdown
> [warning] port 8529 still in use...
> done
> cd ModPerl-Registry && make test
> make[1]: se ingresa al directorio
> `/home/dani/src/mod_perl-2.0.7/ModPerl-Registry'
> /home/dani/perl/bin/perl -I../blib/arch -I../blib/lib \
> t/TEST -clean
> [warning] setting ulimit to allow core files
> ulimit -c unlimited; /home/dani/perl/bin/perl
> /home/dani/src/mod_perl-2.0.7/ModPerl-Registry/t/TEST -clean
> APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT= APACHE_TEST_USER=
> APACHE_TEST_APXS= \
> /home/dani/perl/bin/perl -I../blib/arch -I../blib/lib \
> t/TEST -bugreport -verbose=0
> [warning] setting ulimit to allow core files
> ulimit -c unlimited; /home/dani/perl/bin/perl
> /home/dani/src/mod_perl-2.0.7/ModPerl-Registry/t/TEST -bugreport -verbose=0
> /home/dani/src/httpd-2.2.22/httpd -d
> /home/dani/src/mod_perl-2.0.7/ModPerl-Registry/t -f
> /home/dani/src/mod_perl-2.0.7/ModPerl-Registry/t/conf/httpd.conf -D APACHE2
> -D PERL_USEITHREADS
> using Apache/2.2.22 (prefork MPM)
>
> waiting 90 seconds for server to start: ....
> waiting 90 seconds for server to start: ok (waited 2 secs)
> server localhost:8529 started
> t/206.t .............. ok
> t/304.t .............. ok
> t/404.t .............. ok
> t/500.t .............. ok
> t/bad_scripts.t ...... ok
> t/basic.t ............ ok
> t/bin_resp.t ......... ok
> t/cgi.t .............. ok
> t/closure.t .......... ok
> t/dirindex.t ......... ok
> t/fatalstobrowser.t .. skipped: fatalsToBrowser known not to work, CGI
> version 99.99 or higher is required
> t/flush.t ............ skipped: cannot find module 'deflate'
> t/ithreads.t ......... ok
> t/nph.t .............. ok
> t/perlrun_extload.t .. ok
> t/prefork.t .......... ok
> t/redirect.t ......... ok
> t/regex.t ............ ok
> t/rewrite_env.t ...... skipped: cannot find module 'mod_rewrite.c'
> t/special_blocks.t ... ok
> All tests successful.
> Files=20, Tests=84, 33 wallclock secs ( 0.39 usr 0.09 sys + 26.39 cusr
> 3.21 csys = 30.08 CPU)
> Result: PASS
> [warning] server localhost:8529 shutdown
> make[1]: se sale del directorio
> `/home/dani/src/mod_perl-2.0.7/ModPerl-Registry'
> cd Apache-Reload && make test
> make[1]: se ingresa al directorio
> `/home/dani/src/mod_perl-2.0.7/Apache-Reload'
> /home/dani/perl/bin/perl -I../blib/arch -I../blib/lib \
> t/TEST -clean
> [warning] setting ulimit to allow core files
> ulimit -c unlimited; /home/dani/perl/bin/perl
> /home/dani/src/mod_perl-2.0.7/Apache-Reload/t/TEST -clean
> APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT= APACHE_TEST_USER=
> APACHE_TEST_APXS= \
> /home/dani/perl/bin/perl -I../blib/arch -I../blib/lib \
> t/TEST -bugreport -verbose=0
> [warning] setting ulimit to allow core files
> ulimit -c unlimited; /home/dani/perl/bin/perl
> /home/dani/src/mod_perl-2.0.7/Apache-Reload/t/TEST -bugreport -verbose=0
> mod_perl 2 was built against Apache sources, we don't know where
> httpd/apxs executables are, therefore skipping the test suite execution at
> /home/dani/src/mod_perl-2.0.7/Apache-Test/lib/Apache/TestConfig.pm line 371.
> make[1]: *** [run_tests] Error 2
> make[1]: se sale del directorio
> `/home/dani/src/mod_perl-2.0.7/Apache-Reload'
> make: *** [run_subtests] Error 2
>
> Again, no apxs needed so I ignore the failure of this last test and
> proceed with the install:
>
> make install
>
> Finally, some manual testing (from the mod_perl doc) and everything seems
> to work:
>
> Registry Scripts
> To enable registry scripts add the following to httpd.conf:
>
> Alias /perl/ /home/dani/httpd/perl/
>
> SetHandler perl-script
> PerlResponseHandler ModPerl::Registry
> PerlOptions +ParseHeaders
> Options +ExecCGI
> Order allow,deny
> Allow from all
>
>
> and now assuming that we have the following script:
>
> #!/usr/local/bin/perl5
> print "Content-type: text/plain\n\n";
> print "mod_perl rocks!\n";
>
> saved in /home/dani/httpd/perl/rock.pl. Make the script executable and
> readable by everybody:
>
> % chmod a+rx /home/dani/httpd/perl/rock.pl
>
> Of course the path to the script should be readable by the server too. In
> the real world you probably want to have a tighter permissions, but for the
> purpose of testing that things are working this is just fine.
>
> Now restart the server and issue a request to
> http://localhost/perl/rock.pl and you should get the response:
>
> mod_perl rocks!
>
> If that didn't work check the error_log file.
>
> For more information on the registry scripts refer to the
> ModPerl::Registry manpage. (XXX: one day there will a tutorial on registry,
> should port it from 1.0's docs).
>
>
> Handler Modules
> Finally check that you can run mod_perl handlers. Let's write a response
> handler similar to the registry script from the previous section:
>
> #file:MyApache2/Rocks.pm
> #----------------------
> package MyApache2::Rocks;
>
> use strict;
> use warnings;
>
> use Apache2::RequestRec ();
> use Apache2::RequestIO ();
>
> use Apache2::Const -compile => qw(OK);
>
> sub handler {
> my $r = shift;
>
> $r->content_type('text/plain');
> print "mod_perl 2.0 rocks!\n";
>
> return Apache2::Const::OK;
> }
> 1;
>
> Save the code in the file MyApache2/Rocks.pm, somewhere where mod_perl can
> find it. For example let's put it under
> /home/dani/httpd/perl/MyApache2/Rocks.pm, and we tell mod_perl that
> /home/dani/httpd/perl/ is in @INC, via a startup file which includes just:
>
> use lib qw(/home/dani/httpd/perl);
> 1;
>
> and loaded from httpd.conf:
>
> PerlRequire /home/dani/httpd/perl/startup.pl
>
> Now we can configure our module in httpd.conf:
>
>
> SetHandler perl-script
> PerlResponseHandler MyApache2::Rocks
>
>
> Now restart the server and issue a request to http://localhost/rocks and
> you should get the response:
>
> mod_perl 2.0 rocks!
>
> If that didn't work check the error_log file.
>
>
> Cheers,
> Dani
>
>
>
>