Re: [mp2] Test failures in mod_perl 2.0.9 (Apache 2.2.31, perl 5.24.0)

OK I will give that a try. Unfortunate, as 5.24.0 has been blessed with 
LTS status by the Perl gods. Hopefully a new mod_perl will come out that 
includes this fix.

Bill.


On 7/21/2016 6:10 PM, Adam Prime wrote:
> there are changes in SVN to support perls >= 5.22, but the work hasn't
> been released and may not be complete yet.  This is the bug:
>
> https://rt.cpan.org/Public/Bug/Display.html?id=101962
>
> If you can downgrade your perl to 5.20 then you should be able to get
> things running.
>
> Adam
>
>
> On 07/21/2016 05:16 PM, William Ward wrote:
>> -------------8<---------- Start Bug Report ------------8<----------
>> 1. Problem Description:
>>
>> Until recently we have been using Perl 5.8.8, Apache 2.2.29, and
>> mod_perl 2.0.8. Due to migration to a new platform, it is necessary to
>> rebuild our tech stack, so I am taking this opportunity to upgrade
>> (Perl 5.8.8 doesn't want to build on the new platform anyway).
>>
>> Everything compiles fine, and Apache and Perl have no issues but
>> mod_perl has failures running "make test":
>>
>> Test Summary Report
>> -------------------
>> t/api/uri.t                           (Wstat: 0 Tests: 12 Failed: 0)
>>    Parse errors: Bad plan.  You planned 24 tests but ran 12.
>> t/apr-ext/uri.t                       (Wstat: 65280 Tests: 12 Failed: 0)
>>    Non-zero exit status: 255
>>    Parse errors: Bad plan.  You planned 36 tests but ran 12.
>> t/apr/uri.t                           (Wstat: 0 Tests: 12 Failed: 0)
>>    Parse errors: Bad plan.  You planned 36 tests but ran 12.
>> t/directive/perlloadmodule3.t         (Wstat: 0 Tests: 3 Failed: 3)
>>    Failed tests:  1-3
>> t/filter/both_str_native_remove.t     (Wstat: 0 Tests: 8 Failed: 4)
>>    Failed tests:  1, 6-8
>> t/modperl/print.t                     (Wstat: 0 Tests: 5 Failed: 0)
>>    Parse errors: Bad plan.  You planned 6 tests but ran 5.
>> t/modperl/printf.t                    (Wstat: 65280 Tests: 0 Failed: 0)
>>    Non-zero exit status: 255
>>    Parse errors: No plan found in TAP output
>> Files=245, Tests=2223, 136 wallclock secs ( 1.16 usr 2.63 sys + 80.27
>> cusr 35.91 csys = 119.97 CPU)
>> Result: FAIL
>> Failed 7/245 test programs. 7/2223 subtests failed.
>>
>> I re-ran the tests mentioned above using -verbose mode, and the
>> results are below.
>>
>> % t/TEST -verbose api/uri apr-ext/uri apr/uri
>> directive/perlloadmodule3 filter/both_str_native_remove modperl/print
>> modperl/printf
>> [warning] setting ulimit to allow core files
>> ulimit -c unlimited; /arudev/tech-stack/16.09.16.06/linux/bin/perl
>> /scratch/wward/build/tech-stack/build/16.09.16.06/linux/cpan/build/mod_perl-2.0.9/t/TEST
>> -verbose 'api/uri' 'apr-ext/uri' 'apr/uri' 'directive/perlloadmodule3'
>> 'filter/both_str_native_remove' 'modperl/print' 'modperl/printf'
>> /arudev/tech-stack/16.09.16.06/linux/bin/httpd  -d
>> /scratch/wward/build/tech-stack/build/16.09.16.06/linux/cpan/build/mod_perl-2.0.9/t
>> -f
>> /scratch/wward/build/tech-stack/build/16.09.16.06/linux/cpan/build/mod_perl-2.0.9/t/conf/httpd.conf
>> -D APACHE2
>> using Apache/2.2.31 (prefork MPM)
>>
>> waiting 120 seconds for server to start: .[Thu Jul 21 14:01:34 2016]
>> [info] 6 Apache2:: modules loaded
>> [Thu Jul 21 14:01:34 2016] [info] 0 APR:: modules loaded
>> [Thu Jul 21 14:01:34 2016] [info] base server + 29 vhosts ready to run
>> tests
>> ..
>> waiting 120 seconds for server to start: ok (waited 2 secs)
>> server localhost.localdomain:8529 started
>> server localhost.localdomain:8530 listening (perlsections)
>> server localhost.localdomain:8531 listening (inherit)
>> server localhost.localdomain:8532 listening (filter_out_apache)
>> server localhost.localdomain:8533 listening (TestVhost::log)
>> server localhost.localdomain:8534 listening (TestVhost::config)
>> server localhost.localdomain:8535 listening (TestModperl::setupenv)
>> server localhost.localdomain:8536 listening (TestModperl::perl_options2)
>> server localhost.localdomain:8537 listening (TestModperl::perl_options)
>> server localhost.localdomain:8538 listening (TestModperl::merge)
>> server localhost.localdomain:8539 listening
>> (TestDirective::perlcleanuphandler)
>> server localhost.localdomain:8540 listening (TestModules::proxy)
>> server localhost.localdomain:8541 listening (TestUser::rewrite)
>> server localhost.localdomain:8542 listening (TestProtocol::echo_bbs)
>> server localhost.localdomain:8543 listening (TestProtocol::echo_timeout)
>> server localhost.localdomain:8544 listening (TestProtocol::echo_block)
>> server localhost.localdomain:8545 listening (TestProtocol::pseudo_http)
>> server localhost.localdomain:8546 listening (TestProtocol::echo_filter)
>> server localhost.localdomain:8547 listening (TestProtocol::echo_bbs2)
>> server localhost.localdomain:8548 listening (TestProtocol::echo_nonblock)
>> server localhost.localdomain:8549 listening (TestPreConnection::note)
>> server localhost.localdomain:8550 listening (TestHooks::init)
>> server localhost.localdomain:8551 listening (TestHooks::startup)
>> server localhost.localdomain:8552 listening (TestHooks::hookrun)
>> server localhost.localdomain:8553 listening
>> (TestHooks::stacked_handlers2)
>> server localhost.localdomain:8554 listening (TestHooks::trans)
>> server localhost.localdomain:8555 listening
>> (TestFilter::both_str_con_add)
>> server localhost.localdomain:8556 listening (TestFilter::in_bbs_msg)
>> server localhost.localdomain:8557 listening
>> (TestFilter::in_bbs_inject_header)
>> server localhost.localdomain:8558 listening (TestFilter::in_str_msg)
>> server localhost.localdomain:8559 listening (TestDirective::perlrequire)
>> server localhost.localdomain:8560 listening (TestDirective::perlmodule)
>> server localhost.localdomain:8561 listening
>> (TestDirective::perlloadmodule3)
>> server localhost.localdomain:8562 listening
>> (TestDirective::perlloadmodule5)
>> server localhost.localdomain:8563 listening
>> (TestDirective::perlloadmodule4)
>> server localhost.localdomain:8564 listening (TestAPI::add_config)
>> server localhost.localdomain:8565 listening
>> (TestDirective::perlloadmodule6)
>> server localhost.localdomain:8566 listening
>> (TestHooks::push_handlers_anon)
>> t/api/uri.t ........................
>> 1..24
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:36 2016
>> # Current time GMT:   Thu Jul 21 21:01:36 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> ok 1
>> # testing : path
>> # expected: qr/^\/TestAPI__uri/
>> # received: '/TestAPI__uri'
>> ok 2
>> # testing : unparse
>> # expected: qr/^\/TestAPI__uri/
>> # received: '/TestAPI__uri'
>> ok 3
>> # testing : construct_server/get_server_name/get_server_port
>> # expected: 'localhost.localdomain:8529'
>> # received: 'localhost.localdomain:8529'
>> ok 4
>> # testing : construct_server(example.com)
>> # expected: 'example.com:8529'
>> # received: 'example.com:8529'
>> ok 5
>> # testing : construct_server(example.com, 9097)
>> # expected: 'example.com:9097'
>> # received: 'example.com:9097'
>> ok 6
>> # testing : construct_server(example.com, 9097, new_pool)
>> # expected: 'example.com:9097'
>> # received: 'example.com:9097'
>> ok 7
>> # construct_url: http://localhost.localdomain:8529/TestAPI__uri
>> # r->uri: /TestAPI__uri
>> ok 8
>> # testing : unparse
>> # expected: qr/\/TestAPI__uri/
>> # received: 'http://localhost.localdomain:8529/TestAPI__uri'
>> ok 9
>> # testing : parsed path
>> # expected: '/foo/bar'
>> # received: '/foo/bar'
>> ok 10
>> # construct_url: http://localhost.localdomain:8529/TestAPI__uri?query
>> # r->uri:
>> # /TestAPI__uri
>> # testing : construct_url($uri)
>> # expected: qr/\/TestAPI__uri/
>> # received: 'http://localhost.localdomain:8529/TestAPI__uri?query'
>> ok 11
>> # testing : args vs query
>> # expected: 'query'
>> # received: 'query'
>> ok 12
>> <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> <html><head>
>> <title>200 OK</title>
>> </head><body>
>> <h1>OK</h1>
>> <p>The server encountered an internal error or
>> misconfiguration and was unable to complete
>> your request.</p>
>> <p>Please contact the server administrator,
>>   [email protected] and inform them of the time the error occurred,
>> and anything you might have done that may have
>> caused the error.</p>
>> <p>More information about this error may be available
>> in the server error log.</p>
>> <hr>
>> <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> </body></html>
>> Failed 12/24 subtests
>> Redundant argument in sprintf at
>> /scratch/wward/build/tech-stack/build/16.09.16.06/linux/cpan/build/mod_perl-2.0.9/t/lib/TestAPRlib/uri.pm
>> line 91.
>> t/apr-ext/uri.t ....................
>> 1..36
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:38 2016
>> # Current time GMT:   Thu Jul 21 21:01:38 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> ok 1
>> ok 2
>> # testing : password
>> # expected: 'password'
>> # received: 'password'
>> ok 3
>> # testing : port
>> # expected: 8000
>> # received: '8000'
>> ok 4
>> # testing : query
>> # expected: 'query'
>> # received: 'query'
>> ok 5
>> # testing : user
>> # expected: 'user'
>> # received: 'user'
>> ok 6
>> # testing : path
>> # expected: '/path/file.pl'
>> # received: '/path/file.pl'
>> ok 7
>> # testing : hostname
>> # expected: 'www.example.com'
>> # received: 'www.example.com'
>> ok 8
>> # testing : fragment
>> # expected: 'fragment'
>> # received: 'fragment'
>> ok 9
>> # testing : scheme
>> # expected: 'http'
>> # received: 'http'
>> ok 10
>> # testing : hostinfo
>> # expected: 'user:[email protected]:8000'
>> # received: 'user:[email protected]:8000'
>> ok 11
>> # password: pass => pass
>> # port: 21 => 21
>> # query: undef => undef
>> # user: log => log
>> # path: /pub => /pub
>> # hostname: ftp.example.com => ftp.example.com
>> # fragment: undef => undef
>> # scheme: ftp => ftp
>> # testing : hostinfo
>> # expected: 'user:[email protected]:8000'
>> # received: 'user:[email protected]:8000'
>> ok 12
>> Dubious, test returned 255 (wstat 65280, 0xff00)
>> Failed 24/36 subtests
>> t/apr/uri.t ........................
>> 1..36
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:36 2016
>> # Current time GMT:   Thu Jul 21 21:01:36 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> ok 1
>> ok 2
>> # testing : user
>> # expected: 'user'
>> # received: 'user'
>> ok 3
>> # testing : scheme
>> # expected: 'http'
>> # received: 'http'
>> ok 4
>> # testing : path
>> # expected: '/path/file.pl'
>> # received: '/path/file.pl'
>> ok 5
>> # testing : port
>> # expected: 8000
>> # received: '8000'
>> ok 6
>> # testing : password
>> # expected: 'password'
>> # received: 'password'
>> ok 7
>> # testing : hostname
>> # expected: 'www.example.com'
>> # received: 'www.example.com'
>> ok 8
>> # testing : fragment
>> # expected: 'fragment'
>> # received: 'fragment'
>> ok 9
>> # testing : query
>> # expected: 'query'
>> # received: 'query'
>> ok 10
>> # testing : hostinfo
>> # expected: 'user:[email protected]:8000'
>> # received: 'user:[email protected]:8000'
>> ok 11
>> # user: log => log
>> # scheme: ftp => ftp
>> # path: /pub => /pub
>> # port: 21 => 21
>> # password: pass => pass
>> # hostname: ftp.example.com => ftp.example.com
>> # fragment: undef => undef
>> # query: undef => undef
>> # testing : hostinfo
>> # expected: 'user:[email protected]:8000'
>> # received: 'user:[email protected]:8000'
>> ok 12
>> <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> <html><head>
>> <title>200 OK</title>
>> </head><body>
>> <h1>OK</h1>
>> <p>The server encountered an internal error or
>> misconfiguration and was unable to complete
>> your request.</p>
>> <p>Please contact the server administrator,
>>   [email protected] and inform them of the time the error occurred,
>> and anything you might have done that may have
>> caused the error.</p>
>> <p>More information about this error may be available
>> in the server error log.</p>
>> <hr>
>> <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> </body></html>
>> Failed 24/36 subtests
>> # Failed test 1 in t/directive/perlloadmodule3.t at line 39
>> # Failed test 2 in t/directive/perlloadmodule3.t at line 70
>> # Failed test 3 in t/directive/perlloadmodule3.t at line 98
>> t/directive/perlloadmodule3.t ......
>> 1..3
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:39 2016
>> # Current time GMT:   Thu Jul 21 21:01:39 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> # connecting to localhost.localdomain:8529
>> # testing : server merge
>> # expected: '<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>500 Internal Server Error</title>
>> # </head><body>
>> # <h1>Internal Server Error</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> # received: 'Processing by main server.
>> #
>> # Section 1: Main Server
>> # MyAppend   : MainServer
>> # MyList     : ["MainServer"]
>> # MyOverride : MainServer
>> # MyPlus     : 5
>> #
>> # Section 2: Location
>> # MyAppend   : MainServer
>> # MyList     : ["MainServer"]
>> # MyOverride : MainServer
>> # MyPlus     : 5
>> # '
>> not ok 1
>> # connecting to localhost.localdomain:8561
>> # testing : server/dir merge
>> # expected: 'Processing by virtual host.
>> #
>> # Section 1: Main Server
>> # MyAppend   : MainServer
>> # MyList     : ["MainServer"]
>> # MyOverride : MainServer
>> # MyPlus     : 5
>> #
>> # Section 2: Virtual Host
>> # MyAppend   : MainServer VHost
>> # MyList     : ["MainServer", "VHost"]
>> # MyOverride : VHost
>> # MyPlus     : 7
>> #
>> # Section 3: Location
>> # MyAppend   : MainServer VHost Dir
>> # MyList     : ["MainServer", "VHost", "Dir"]
>> # MyOverride : Dir
>> # MyPlus     : 10
>> # '
>> # received: '<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>500 Internal Server Error</title>
>> # </head><body>
>> # <h1>Internal Server Error</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8561</address>
>> # </body></html>
>> # '
>> not ok 2
>> # testing : server/dir/subdir merge
>> # expected: 'Processing by virtual host.
>> #
>> # Section 1: Main Server
>> # MyAppend   : MainServer
>> # MyList     : ["MainServer"]
>> # MyOverride : MainServer
>> # MyPlus     : 5
>> #
>> # Section 2: Virtual Host
>> # MyAppend   : MainServer VHost
>> # MyList     : ["MainServer", "VHost"]
>> # MyOverride : VHost
>> # MyPlus     : 7
>> #
>> # Section 3: Location
>> # MyAppend   : MainServer VHost Dir SubDir
>> # MyList     : ["MainServer", "VHost", "Dir", "SubDir"]
>> # MyOverride : SubDir
>> # MyPlus     : 11
>> # '
>> # received: '<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>500 Internal Server Error</title>
>> # </head><body>
>> # <h1>Internal Server Error</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8561</address>
>> # </body></html>
>> # '
>> not ok 3
>> Failed 3/3 subtests
>> # Failed test 1 in t/filter/both_str_native_remove.t at line 23
>> # Failed test 6 in t/filter/both_str_native_remove.t at line 46
>> # Failed test 7 in t/filter/both_str_native_remove.t at line 50
>> # Failed test 8 in t/filter/both_str_native_remove.t at line 54
>> t/filter/both_str_native_remove.t ..
>> 1..8
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:39 2016
>> # Current time GMT:   Thu Jul 21 21:01:39 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> # testing : INCLUDES filter
>> # expected: qr/xSSI OK/
>> # received: 'content: gzipped text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2:
>> modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> not ok 1
>> # testing : DEFLATE filter
>> # expected: qr/content: gzipped text/
>> # received: 'content: gzipped text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2:
>> modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> ok 2
>> # testing : DEFLATE filter is present
>> # expected: qr/input1: [\w,]+deflate/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> ok 3
>> # testing : DEFLATE filter is removed
>> # expected: qr/input2: [\w,]+deflate/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> ok 4
>> # testing : DEFLATE filter wasn't invoked
>> # expected: qr/content: plain text/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> ok 5
>> # testing : INCLUDES filter is present
>> # expected: qr/output1:
>> modperl_request_output,includes,modperl_request_output,/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> not ok 6
>> # testing : INCLUDES filter is removed
>> # expected: qr/output2: modperl_request_output,(?!includes)/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> not ok 7
>> # testing : INCLUDES filter wasn't invoked
>> # expected: qr/x<!--#echo var="SSI_TEST" -->x/
>> # received: 'content: plain text
>> # input1:
>> modperl_request_input,modperl_request_input,modperl_request_input,deflate,http_in,core_in
>> # input2: modperl_request_input,modperl_request_input,http_in,core_in
>> # <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> # <html><head>
>> # <title>200 OK</title>
>> # </head><body>
>> # <h1>OK</h1>
>> # <p>The server encountered an internal error or
>> # misconfiguration and was unable to complete
>> # your request.</p>
>> # <p>Please contact the server administrator,
>> #  [email protected] and inform them of the time the error occurred,
>> # and anything you might have done that may have
>> # caused the error.</p>
>> # <p>More information about this error may be available
>> # in the server error log.</p>
>> # <hr>
>> # <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> # </body></html>
>> # '
>> not ok 8
>> Failed 4/8 subtests
>> t/modperl/print.t ..................
>> 1..6
>> # Running under perl version 5.024000 for linux
>> # Current time local: Thu Jul 21 14:01:36 2016
>> # Current time GMT:   Thu Jul 21 21:01:36 2016
>> # Using Test.pm version 1.28
>> # Using Apache/Test.pm version 1.39
>> ok 1
>> ok 2
>> ok 3
>> ok 4
>> # 11 bytes
>> ok 5
>> <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
>> <html><head>
>> <title>200 OK</title>
>> </head><body>
>> <h1>OK</h1>
>> <p>The server encountered an internal error or
>> misconfiguration and was unable to complete
>> your request.</p>
>> <p>Please contact the server administrator,
>>   [email protected] and inform them of the time the error occurred,
>> and anything you might have done that may have
>> caused the error.</p>
>> <p>More information about this error may be available
>> in the server error log.</p>
>> <hr>
>> <address>Apache/2.2.31 (Unix) world domination series/2.0
>> mod_perl/2.0.9 Perl/v5.24.0 Server at localhost.localdomain Port
>> 8529</address>
>> </body></html>
>> Failed 1/6 subtests
>> request has failed (the response code was: 500)
>> see t/logs/error_log for more details
>> t/modperl/printf.t .................
>> Dubious, test returned 255 (wstat 65280, 0xff00)
>> No subtests run
>>
>> Test Summary Report
>> -------------------
>> t/api/uri.t                      (Wstat: 0 Tests: 12 Failed: 0)
>>    Parse errors: Bad plan.  You planned 24 tests but ran 12.
>> t/apr-ext/uri.t                  (Wstat: 65280 Tests: 12 Failed: 0)
>>    Non-zero exit status: 255
>>    Parse errors: Bad plan.  You planned 36 tests but ran 12.
>> t/apr/uri.t                      (Wstat: 0 Tests: 12 Failed: 0)
>>    Parse errors: Bad plan.  You planned 36 tests but ran 12.
>> t/directive/perlloadmodule3.t    (Wstat: 0 Tests: 3 Failed: 3)
>>    Failed tests:  1-3
>> t/filter/both_str_native_remove.t (Wstat: 0 Tests: 8 Failed: 4)
>>    Failed tests:  1, 6-8
>> t/modperl/print.t                (Wstat: 0 Tests: 5 Failed: 0)
>>    Parse errors: Bad plan.  You planned 6 tests but ran 5.
>> t/modperl/printf.t               (Wstat: 65280 Tests: 0 Failed: 0)
>>    Non-zero exit status: 255
>>    Parse errors: No plan found in TAP output
>> Files=7, Tests=52,  4 wallclock secs ( 0.04 usr  0.08 sys +  2.38
>> cusr  0.99 csys =  3.49 CPU)
>> Result: FAIL
>> Failed 7/7 test programs. 7/52 subtests failed.
>> [warning] server localhost.localdomain:8529 shutdown
>> [  error] error running tests (please examine t/logs/error_log)
>> 2. Used Components and their Configuration:
>>
>> *** mod_perl version 2.000009
>>
>> *** using
>> /scratch/wward/build/tech-stack/build/16.09.16.06/linux/cpan/build/mod_perl-2.0.9/lib/Apache2/BuildConfig.pm
>>
>> *** Makefile.PL options:
>>    MP_APR_LIB     => aprext
>>    MP_APXS        => /arudev/tech-stack/16.09.16.06/linux/bin/apxs
>>    MP_COMPAT_1X   => 1
>>    MP_GENERATE_XS => 1
>>    MP_LIBNAME     => mod_perl
>>    MP_USE_DSO     => 1
>>
>>
>> *** /arudev/tech-stack/16.09.16.06/linux/bin/httpd -V
>> Server version: Apache/2.2.31 (Unix)
>> Server built:   Jul 21 2016 12:20:36
>> Server's Module Magic Number: 20051115:40
>> Server loaded:  APR 1.5.2, APR-Util 1.5.4
>> Compiled using: APR 1.5.2, APR-Util 1.5.4
>> Architecture:   64-bit
>> Server MPM:     Prefork
>>    threaded:     no
>>      forked:     yes (variable process count)
>> Server compiled with....
>>   -D APACHE_MPM_DIR="server/mpm/prefork"
>>   -D APR_HAS_SENDFILE
>>   -D APR_HAS_MMAP
>>   -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
>>   -D APR_USE_SYSVSEM_SERIALIZE
>>   -D APR_USE_PTHREAD_SERIALIZE
>>   -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
>>   -D APR_HAS_OTHER_CHILD
>>   -D AP_HAVE_RELIABLE_PIPED_LOGS
>>   -D DYNAMIC_MODULE_LIMIT=128
>>   -D HTTPD_ROOT="/arudev/tech-stack/16.09.16.06/linux"
>>   -D SUEXEC_BIN="/arudev/tech-stack/16.09.16.06/linux/bin/suexec"
>>   -D DEFAULT_PIDLOG="logs/httpd.pid"
>>   -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
>>   -D DEFAULT_LOCKFILE="logs/accept.lock"
>>   -D DEFAULT_ERRORLOG="logs/error_log"
>>   -D AP_TYPES_CONFIG_FILE="conf/mime.types"
>>   -D SERVER_CONFIG_FILE="conf/httpd.conf"
>>
>> *** /usr/bin/ldd /arudev/tech-stack/16.09.16.06/linux/bin/httpd
>>      linux-vdso.so.1 =>  (0x00007fff30ff7000)
>>      libz.so.1 => /arudev/tech-stack/16.09.16.06/linux/lib/libz.so.1
>> (0x00007f3776e47000)
>>      libm.so.6 => /lib64/libm.so.6 (0x00000038a8a00000)
>>      libaprutil-1.so.0 =>
>> /arudev/tech-stack/16.09.16.06/linux/lib/libaprutil-1.so.0
>> (0x00007f3776bce000)
>>      libexpat.so.1 =>
>> /arudev/tech-stack/16.09.16.06/linux/lib/libexpat.so.1
>> (0x00007f37769a6000)
>>      libapr-1.so.0 =>
>> /arudev/tech-stack/16.09.16.06/linux/lib/libapr-1.so.0
>> (0x00007f3776772000)
>>      libuuid.so.1 => /lib64/libuuid.so.1 (0x00000038b0a00000)
>>      librt.so.1 => /lib64/librt.so.1 (0x00000038a9200000)
>>      libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00000038b5600000)
>>      libpthread.so.0 => /lib64/libpthread.so.0 (0x00000038a8200000)
>>      libc.so.6 => /lib64/libc.so.6 (0x00000038a7e00000)
>>      /lib64/ld-linux-x86-64.so.2 (0x00000038a7a00000)
>>      libfreebl3.so => /lib64/libfreebl3.so (0x00000038b5a00000)
>>      libdl.so.2 => /lib64/libdl.so.2 (0x00000038a8600000)
>>
>>
>> *** (apr|apu)-config linking info
>>
>>   -L/arudev/tech-stack/16.09.16.06/linux/lib -laprutil-1     -lexpat
>>   -L/arudev/tech-stack/16.09.16.06/linux/lib -lapr-1 -luuid -lrt
>> -lcrypt  -lpthread
>>
>>
>>
>> *** /arudev/tech-stack/16.09.16.06/linux/bin//perl -V
>> Summary of my perl5 (revision 5 version 24 subversion 0) configuration:
>>
>>    Platform:
>>      osname=linux, osvers=3.8.13-44.1.1.el6uek.x86_64,
>> archname=x86_64-linux
>>      uname='linux slc03qfe 3.8.13-44.1.1.el6uek.x86_64 #2 smp wed sep
>> 10 06:10:25 pdt 2014 x86_64 x86_64 x86_64 gnulinux '
>>      config_args='-des -A ccflags=-fPIC
>> -Dprefix=/arudev/tech-stack/16.09.16.06/linux -Dmake=/usr/bin/make
>> -Dotherlibdirs=/arudev/tech-stack/16.09.16.06/portable/lib/perl5:/arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl
>> -Dbin=/arudev/tech-stack/16.09.16.06/linux/bin/ -Uinstallusrbinperl
>> -Duse64bitint -Duselargefiles
>> -Dstartperl=#!/arudev/tech-stack/16.09.16.05/linux/bin/perl5.24.0
>> -Dinc_version_list=none
>> -Dscriptdir=/arudev/tech-stack/16.09.16.06/linux/bin
>> -Dsitebin=/arudev/tech-stack/16.09.16.06/linux/bin'
>>      hint=recommended, useposix=true, d_sigaction=define
>>      useithreads=undef, usemultiplicity=undef
>>      use64bitint=define, use64bitall=define, uselongdouble=undef
>>      usemymalloc=n, bincompat5005=undef
>>    Compiler:
>>      cc='cc', ccflags ='-fPIC -fwrapv -fno-strict-aliasing -pipe
>> -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
>> -D_FORTIFY_SOURCE=2',
>>      optimize='-O2',
>>      cppflags='-fPIC -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
>>      ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-11)',
>> gccosandvers=''
>>      intsize=4, longsize=8, ptrsize=8, doublesize=8,
>> byteorder=12345678, doublekind=3
>>      d_longlong=define, longlongsize=8, d_longdbl=define,
>> longdblsize=16, longdblkind=3
>>      ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
>> lseeksize=8
>>      alignbytes=8, prototype=define
>>    Linker and Libraries:
>>      ld='cc', ldflags =' -fstack-protector'
>>      libpth=/usr/lib /lib/../lib64 /usr/lib/../lib64 /lib /lib64
>> /usr/lib64 /usr/local/lib64
>>      libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
>>      perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
>>      libc=libc-2.12.so, so=so, useshrplib=false, libperl=libperl.a
>>      gnulibc_version='2.12'
>>    Dynamic Linking:
>>      dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
>>      cccdlflags='-fPIC', lddlflags='-shared -O2 -fstack-protector'
>>
>>
>> Characteristics of this binary (from libperl):
>>    Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_COPY_ON_WRITE
>>                          PERL_DONT_CREATE_GVSV
>>                          PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
>> PERL_MALLOC_WRAP
>>                          PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
>>                          USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
>>                          USE_LOCALE_CTYPE USE_LOCALE_NUMERIC
>> USE_LOCALE_TIME
>>                          USE_PERLIO USE_PERL_ATOF
>>    Built under linux
>>    Compiled at Jul 21 2016 12:34:27
>>    %ENV:
>> PERL5LIB="/arudev/tech-stack/16.09.16.06/portable/lib/perl5:/arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl"
>>
>>      PERL_LWP_USE_HTTP_10="1"
>>    @INC:
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/x86_64-linux
>>      /arudev/tech-stack/16.09.16.06/portable/lib/perl5
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl/5.24.0/x86_64-linux
>>
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl/5.24.0
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl
>> /arudev/tech-stack/16.09.16.06/linux/lib/perl5/site_perl/5.24.0/x86_64-linux
>>
>> /arudev/tech-stack/16.09.16.06/linux/lib/perl5/site_perl/5.24.0
>> /arudev/tech-stack/16.09.16.06/linux/lib/perl5/5.24.0/x86_64-linux
>>      /arudev/tech-stack/16.09.16.06/linux/lib/perl5/5.24.0
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl/5.24.0/x86_64-linux
>>
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl/5.24.0
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/x86_64-linux
>>      /arudev/tech-stack/16.09.16.06/portable/lib/perl5
>> /arudev/tech-stack/16.09.16.06/portable/lib/perl5/site_perl
>>      .
>>
>> *** Packages of interest status:
>>
>> Apache2            : -
>> Apache2::Request   : -
>> CGI                : 4.31
>> ExtUtils::MakeMaker: 7.10_01, 7.18
>> LWP                : -
>> mod_perl           : -
>> mod_perl2          : -
>>
>>
>> 3. This is the core dump trace: (if you get a core dump):
>>
>>    n/a
>>
>> This report was generated by t/REPORT on Thu Jul 21 20:54:40 2016 GMT.
>>
>> -------------8<---------- End Bug Report --------------8<----------
>>
>> Note: Complete the rest of the details and post this bug report to
>> modperl <at> perl.apache.org. To subscribe to the list send an empty
>> email to [email protected].
>>
>>