Re: mod_perl, compilation issues, cont
André Warnier (tomcat/perl) <[email protected]>
| Newsgroups | gmane.comp.apache.mod-perl |
|---|---|
| Message-ID | <[email protected]> |
Additional info :
I checked the permissions of all below c:/strawberry/perl, and one thing I can say is that
all directories and files below that point have at least permissions read/write/execute
for all "authenticated users".
On the other hand, I also ran the following (why did I not think of that before ?), just
to make sure that the issue would be reproducible with only the "vanilla" installed Apache
2.4, perl 5.26.3, mod_perl 2.x :
C:\strawberry\perl\site>set PERL_DL_DEBUG=1
C:\strawberry\perl\site>perl -cw C:/Strawberry/perl/site/lib/Apache2/Const.pm
DynaLoader.pm loaded (C:/Strawberry/perl/site/lib C:/Strawberry/perl/vendor/lib
C:/Strawberry/perl/lib, C:\STRAWB~1\c\lib C:\STRAWB~1\c\x86_64-w64-mingw32\lib
C:\STRAWB~1\c\lib\gcc\x86_64-w64-mingw32\7.1.0)
DynaLoader::bootstrap for ModPerl::Const (auto/ModPerl/Const/Const.xs.dll)
dl_findfile(-LC:/Strawberry/perl/site/lib/auto/ModPerl/Const -LC:/Strawberry/perl/site/lib
-LC:/Strawberry/perl/vendor/lib -LC:/Strawberry/perl/lib Const)
checking in C:/Strawberry/perl/site/lib/auto/ModPerl/Const for Const.xs.dll
checking in C:/Strawberry/perl/site/lib/auto/ModPerl/Const for Const.dll
dl_findfile found: C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll
Can't load 'C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll' for module
ModPerl::Const: load_file:Das angegebene Modul wurde nicht gefunden at
C:/Strawberry/perl/lib/DynaLoader.pm line 193.
at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
Compilation failed in require at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
BEGIN failed--compilation aborted at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
(Note : to make extra sure, I also ran this in a CMD window "run as administrator"; the
results are the same.)
Any other clue, anyone ?
>perl -V :
C:\strawberry\perl\site>perl -V
Summary of my perl5 (revision 5 version 26 subversion 3) configuration:
Platform:
osname=MSWin32
osvers=10.0.17134.407
archname=MSWin32-x64-multi-thread
uname='Win32 strawberry-perl 5.26.3.1 #1 Sun Dec 2 22:57:44 2018 x64'
config_args='undef'
hint=recommended
useposix=true
d_sigaction=undef
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='gcc'
ccflags =' -s -O2 -DWIN32 -DWIN64 -DCONSERVATIVE -D__USE_MINGW_ANSI_STDIO
-DPERL_TEXTMODE_SCRIPTS -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -fwrapv
-fno-strict-aliasing -mms-bitfields'
optimize='-s -O2'
cppflags='-DWIN32'
ccversion=''
gccversion='7.1.0'
gccosandvers=''
intsize=4
longsize=4
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='long long'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='g++'
ldflags ='-s -L"C:\STRAWB~1\perl\lib\CORE" -L"C:\STRAWB~1\c\lib"'
libpth=C:\STRAWB~1\c\lib C:\STRAWB~1\c\x86_64-w64-mingw32\lib
C:\STRAWB~1\c\lib\gcc\x86_64-w64-mingw32\7.1.0
libs= -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32
-lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32
-lodbccp32 -lcomctl32
perllibs= -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32
-lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32
-lodbccp32 -lcomctl32
libc=
so=dll
useshrplib=true
libperl=libperl526.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs
dlext=xs.dll
d_dlsymun=undef
ccdlflags=' '
cccdlflags=' '
lddlflags='-mdll -s -L"C:\STRAWB~1\perl\lib\CORE" -L"C:\STRAWB~1\c\lib"'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
HAVE_INTERP_INTERN
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_IMPLICIT_SYS
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under MSWin32
Compiled at Dec 2 2018 23:03:33
%ENV:
PERL_DL_DEBUG="1"
@INC:
C:/Strawberry/perl/site/lib
C:/Strawberry/perl/vendor/lib
C:/Strawberry/perl/lib
C:\strawberry\perl\site>
Environment :
C:\strawberry\perl\site>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\aw\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=ANDRE-PC
ComSpec=C:\WINDOWS\system32\cmd.exe
DriverData=C:\Windows\System32\Drivers\DriverData
EFSDIR=D:\EFS
EFSLIB=D:\EFS\lib
FPS_BROWSER_APP_PROFILE_STRING=Internet Explorer
FPS_BROWSER_USER_PROFILE_STRING=Default
GIT_SSH=C:\Program Files\TortoiseGit\bin\TortoiseGitPlink.exe
HOMEDRIVE=H:
HOMEPATH=\
HOMESHARE=\\192.168.245.150\scans\user\homeshare\aw
LOCALAPPDATA=C:\Users\aw\AppData\Local
LOGONSERVER=\\KIRK
NUMBER_OF_PROCESSORS=8
OneDrive=C:\Users\aw\OneDrive
OS=Windows_NT
Path=C:\Program Files (x86)\ActiveState Komodo IDE 11\;c:\programs\local;C:\Program Files
(x86)\Common Files\Oracle\Java\javapath;C:\ProgramData\Oracle\Java\javapath;C:\Program
Files (x86)\Intel\Intel(R) Management Engine Components\iCLS\;C:\Program
Files\Intel\Intel(R) Management Engine
Components\iCLS\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\;C:\Program
Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program
Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files
(x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files\Intel\Intel(R)
Management Engine Components\IPT;C:\Program Files\PuTTY\;C:\Program
Files\OpenVPN\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files
(x86)\Attachmate\Reflection\;C:\Program Files\TortoiseGit\bin;C:\Program
Files\Git\cmd;C:\Strawberry\c\bin;C:\Strawberry\perl\site\bin;C:\Strawberry\perl\bin;C:\Users\aw\AppData\Local\Microsoft\WindowsApps;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PERL_DL_DEBUG=1
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 142 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=8e0a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Program
Files\WindowsPowerShell\Modules;C:\WINDOWS\system32\WindowsPowerShell\v1.0\Modules
PUBLIC=C:\Users\Public
SESSIONNAME=Console
SVN_SSH=C:\Program Files\TortoiseGit\bin\TortoiseGitPlink.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\Users\aw\AppData\Local\Temp
TMP=C:\Users\aw\AppData\Local\Temp
USERDNSDOMAIN=MIRA-GLOMAS.INTERN
USERDOMAIN=MIRA-GLOMAS
USERDOMAIN_ROAMINGPROFILE=MIRA-GLOMAS
USERNAME=aw
USERPROFILE=C:\Users\aw
VBOX_MSI_INSTALL_PATH=C:\Program Files\Oracle\VirtualBox\
windir=C:\WINDOWS
C:\strawberry\perl\site>
On 03.02.2020 09:36, André Warnier (tomcat/perl) wrote:
> Thank you very much for your reply below. I was getting desperate of getting any at all.
> I will check the permissions issue and post back to the list.
>
> Maybe in the mneantime an additional question to the list : has *anyone at all* succeeded
> in installing (and using) Apache 2.4 / perl 5.20+ / mod_perl 2.x on a Windows 10 platform ?
> Knowing that someone else has been able to do that, would already help me in focusing my
> debugging efforts to something specific to my laptop.
>
>
> On 31.01.2020 16:45, Bruce Johnson wrote:
>> I am not a Windows expert by any means, but it it possible that it’s a permissions issue
>> on that DLL file or enclosing directory(s)? Folder permissions in Windows will let you
>> grant directory listing rights but not read rights for the process that’s doing the
>> compilation…
>>
>> See:
>> https://www.online-tech-tips.com/computer-tips/set-file-folder-permissions-windows/ under Permission
>> Types; the specific right is ‘List Folder Contents’
>>
>> This would account for both dl_findfile working and the ‘Can’t Load file’ error because
>> the first utilizes the listing rights and the second needs to actually read the file.
>>
>>
>>
>>> On Jan 16, 2020, at 1:34 AM, André Warnier (tomcat/perl) <[email protected]
>>> <mailto:[email protected]>> wrote:
>>>
>>> Can anyone tell me what the error below really means ?
>>> (and if possible, give me a clue as to what may be happening ?)
>>>
>>> To get possibly more details, I re-ran the compile command after setting PERL_DL_DEBUG
>>> in the environment (just something I found in Dynaloader.pm). It does give some more
>>> detail, but I am still stumped..
>>>
>>> Full config described below.
>>> D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm is my module, which compiles just
>>> fine on Linux servers with similar software installed (Apache, mod_perl, perl).
>>>
>>>
>>> C:\>perl -cw D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> DynaLoader.pm loaded (C:/Strawberry/perl/site/lib C:/Strawberry/perl/vendor/lib
>>> C:/Strawberry/perl/lib, C:\STRAWB~1\c\lib C:\STRAWB~1\c\x86_64-w64-mingw32\lib
>>> C:\STRAWB~1\c\lib\gcc\x86_64-w64-mingw32\7.1.0)
>>> DynaLoader::bootstrap for ModPerl::Const (auto/ModPerl/Const/Const.xs.dll)
>>> dl_findfile(-LC:/Strawberry/perl/site/lib/auto/ModPerl/Const
>>> -LC:/Strawberry/perl/site/lib -LC:/Strawberry/perl/vendor/lib -LC:/Strawberry/perl/lib
>>> Const)
>>> checking in C:/Strawberry/perl/site/lib/auto/ModPerl/Const for Const.xs.dll
>>> checking in C:/Strawberry/perl/site/lib/auto/ModPerl/Const for Const.dll
>>> dl_findfile found: C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll
>>> Can't load 'C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll' for module
>>> ModPerl::Const: load_file:Das angegebene Modul wurde nicht gefunden at
>>> C:/Strawberry/perl/lib/DynaLoader.pm line 193.
>>> at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> Compilation failed in require at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> BEGIN failed--compilation aborted at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> Compilation failed in require at D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> line 28.
>>> BEGIN failed--compilation aborted at D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> line 28.
>>>
>>> ---------------------
>>>
>>> OS : Windows 10
>>> Apache httpd 2.4.41
>>> perl (Strawberry) : perl 5, version 26, subversion 2 (v5.26.2) built for
>>> MSWin32-x64-multi-thread
>>> mod_perl : from Steve Hay's mod_perl-2.0.10-strawberryperl-5.26.1.1-64bit.zip,
>>> as per Apache log :
>>> Apache/2.4.41 (Win64) mod_perl/2.0.10 Perl/v5.26.2 configured
>>>
>>> Problem :
>>>
>>> C:\>perl -cw D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> Can't load 'C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll' for module
>>> ModPerl::Const: load_file:Das angegebene Modul wurde nicht gefunden at
>>> C:/Strawberry/perl/lib/DynaLoader.pm line 193.
>>> at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> Compilation failed in require at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> BEGIN failed--compilation aborted at C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19.
>>> Compilation failed in require at D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> line 28.
>>> BEGIN failed--compilation aborted at D:\develop\06_SVN\AP2lib\trunk\modlib\AUTH\UMA2.pm
>>> line 28.
>>>
>>> Line 28 of UMA2.pm is :
>>>
>>> use Apache2::Const -compile => qw(:common :http :methods :override :proxy :log REDIRECT
>>> AUTHZ_GRANTED AUTHZ_DENIED AUTHZ_DENIED_NO_USER AUTHZ_GENERAL_ERROR);
>>>
>>> (wrapping due to email)
>>>
>>> C:/Strawberry/perl/site/lib/Apache2/Const.pm line 19 is :
>>>
>>> use ModPerl::Const ();
>>>
>>> File C:\strawberry\perl\site\lib\ModPerl\Const.pm exists, but has no "load_file" in it.
>>>
>>> The file C:/Strawberry/perl/site/lib/auto/ModPerl/Const/Const.dll exists.
>>>
>>> For non-german-speakers, the above message "load_file:Das angegebene Modul wurde nicht
>>> gefunden" translates as "load_file:the specified module was not found".
>>>
>>> The above module "UMA2.pm" compiles without error on a Linux server with similar httpd,
>>> perl and mod_perl versions.
>>>
>>> Any clue or additional questions welcome.
>>> Thanks
>>
>> --
>> Bruce Johnson
>> University of Arizona
>> College of Pharmacy
>> Information Technology Group
>>
>> Institutions do not have opinions, merely customs
>>
>