problem with wackamole

 

 

Hi, I'm mostly struggling to get this working.. Maybe someone can point
me in the right direction..

 

I have two machines running apache ( kdc-www1 and kdc-www2 ), on the
same subnet. They will share a single virtual IP address ( 202.86.97.199
)     My wackamole and spread config files are the same on both
machines.

 

Spread is listening on port 4803, I'm assuming its running ok. 

 

I can't ping the address 202.86.97.199 from anywhere.. The arp tables
show incomplete for this address.

 

 

How do I debug wackamole, to see if its running..           

 

 

 

COnfigs below.

 

 

 

 

[root@kdc-www2 etc]# more wackamole.conf

Spread = 4803

SpreadRetryInterval = 5s

 

Group = wack1

 

Control = /var/run/wack.it

 

Mature = 5s

 

 

balance {

         AcquisitionsPerRound = all

         interval = 4s

}

 

Arp-Cache = 90s

Prefer None

 

VirtualInterfaces

 {

        { eth0:202.86.97.199/27 }

 }

 

Notify 

{

        # Let's notify the firewalls first. They are bound to get grumpy
first

        eth0:202.86.97.194/32

        eth0:202.86.97.193/32

        eth0:202.86.97.195/32

        # And everything else in the subnet, ( maxed at 128 per sec ) 

        # eth0:202.86.97.192/27 throttle 128

        # Wackamole shares arp-cache across machines, this says to

        # notify every IP address in the aggregate shared arp-cache.

        arp-cache

}

 

[root@kdc-www2 etc]# more spread.conf 

Spread_Segment 202.86.96.223:4803

 

        {

        kdc-www1 202.86.96.202

        kdc-www2 202.86.96.203

        }

[root@kdc-www2 etc]#