Re: How to OR where to read it

--=_alternative 00480F6E80257767_=
Content-Type: text/plain; charset="US-ASCII"

Hi,

I'm not quite sure what you are asking. 

Are you asking whether Sandesha can duplicate the clients soap messages 
and send them as new messages?  If so the answer is no.  Sandesha has no 
control on what application messages need to be sent, these would be 
generated by the webservice or client.  Sandesha is an implementation of 
the WS-Reliable Messaging specification that defines how to reliably 
deliver application messages.  Sandesha runs as a module in Axis2  so that 
when added intercepts application messages before they hit the wire or 
before they are passed onto their desired destination (e.g. a webservice). 
 Under the covers and transparent to the client and webservice Sandesha 
will send protocol messages and add headers to the application message so 
that Sandesha can maintain state of the delivery of the specific 
application message.  Sandesha may re-deliver a duplicate of the 
application message if acknowledgement of the delivery to the destination 
hasn't been sent by Sandesha at the destination end.  At the destination 
end Sandesha will also block duplicate application messages that may 
arrive that have already been processed.

Hope this helps,

Dave



Dave Parsons
Web Services Development
INTERNAL:  David Parsons1/UK/IBM@IBMGB :: DE3F20 :: 246930
EXTERNAL:  [email protected] :: (01962) 816930
Mail Point 211, IBM Hursley Park, Winchester. SO21 2JN




From:
venkov <[email protected]>
To:
[email protected]
Date:
21/07/2010 12:11
Subject:
How to OR where to read it




Hello,
I am new to sandesha2 and axis2
i am trying to figure it out.

But i cound not found any info about:

1.Is it possible sandesha to divide soap body only by itself!
I have a web service and a client! They generate soap messages!
But the messages are only 
<MessageNumber>1<MessageNumber/>
<LastMessage/>
I made a client witch specifically sends many messages, but is there
automatic way!


-- 
View this message in context: 
http://old.nabble.com/How-to-OR-where-to-read-it-tp29224385p29224385.html
Sent from the Apache Sandesha mailing list archive at Nabble.com.


---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]









Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number 
741598. 
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU






--=_alternative 00480F6E80257767_=
Content-Type: text/html; charset="US-ASCII"


<br><font size=2 face="sans-serif">Hi,</font>
<br>
<br><font size=2 face="sans-serif">I'm not quite sure what you are asking.
&nbsp;</font>
<br>
<br><font size=2 face="sans-serif">Are you asking whether Sandesha can
duplicate the clients soap messages and send them as new messages? &nbsp;If
so the answer is no. &nbsp;Sandesha has no control on what application
messages need to be sent, these would be generated by the webservice or
client. &nbsp;Sandesha is an implementation of the WS-Reliable Messaging
specification that defines how to reliably deliver application messages.
&nbsp;Sandesha runs as a module in Axis2 &nbsp;so that when added intercepts
application messages before they hit the wire or before they are passed
onto their desired destination (e.g. a webservice). &nbsp;Under the covers
and transparent to the client and webservice Sandesha will send protocol
messages and add headers to the application message so that Sandesha can
maintain state of the delivery of the specific application message. &nbsp;Sandesha
may re-deliver a duplicate of the application message if acknowledgement
of the delivery to the destination hasn't been sent by Sandesha at the
destination end. &nbsp;At the destination end Sandesha will also block
duplicate application messages that may arrive that have already been processed.</font>
<br>
<br><font size=2 face="sans-serif">Hope this helps,</font>
<br>
<br><font size=2 face="sans-serif">Dave</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif">Dave Parsons<br>
Web Services Development<br>
INTERNAL: &nbsp;David Parsons1/UK/IBM@IBMGB :: DE3F20 :: 246930<br>
EXTERNAL: &nbsp;[email protected] :: (01962) 816930<br>
Mail Point 211, IBM Hursley Park, Winchester. SO21 2JN<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">From:</font>
<td><font size=1 face="sans-serif">venkov &lt;[email protected]&gt;</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">To:</font>
<td><font size=1 face="sans-serif">[email protected]</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Date:</font>
<td><font size=1 face="sans-serif">21/07/2010 12:11</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Subject:</font>
<td><font size=1 face="sans-serif">How to OR where to read it</font></table>
<br>
<hr noshade>
<br>
<br>
<br><tt><font size=2><br>
Hello,<br>
I am new to sandesha2 and axis2<br>
i am trying to figure it out.<br>
<br>
But i cound not found any info about:<br>
<br>
1.Is it possible sandesha to divide soap body only by itself!<br>
I have a web service and a client! They generate soap messages!<br>
But the messages are only <br>
&lt;MessageNumber&gt;1&lt;MessageNumber/&gt;<br>
&lt;LastMessage/&gt;<br>
I made a client witch specifically sends many messages, but is there<br>
automatic way!<br>
<br>
<br>
-- <br>
View this message in context: </font></tt><a href="http://old.nabble.com/How-to-OR-where-to-read-it-tp29224385p29224385.html"><tt><font size=2>http://old.nabble.com/How-to-OR-where-to-read-it-tp29224385p29224385.html</font></tt></a><tt><font size=2><br>
Sent from the Apache Sandesha mailing list archive at Nabble.com.<br>
<br>
<br>
---------------------------------------------------------------------<br>
To unsubscribe, e-mail: [email protected]<br>
For additional commands, e-mail: [email protected]<br>
<br>
</font></tt>
<br>
<br><font size=2 face="sans-serif"><br>
</font>
<br><font size=2 face="sans-serif"><br>
</font>
<hr><font size=2 face="sans-serif"><br>
<i><br>
</i></font>
<p><font size=2 face="sans-serif"><i>Unless stated otherwise above:<br>
IBM United Kingdom Limited - Registered in England and Wales with number
741598. <br>
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU</i></font>
<p><font size=2 face="sans-serif"><br>
<br>
</font>
<br>
<br><font size=2 face="sans-serif"><br>
</font>
--=_alternative 00480F6E80257767_=--