Re: Issues with WSRM 1.1 "single channel" messaging

I suspect the problem occurs because the Offer endpoint address
differs from the WS-A ReplyTo address, though I don't know why that's
happening. Does Method 2 work for you (it omits the offer)?
David

On Fri, Sep 5, 2008 at 7:42 PM, Scott Came <[email protected]> wrote:
> I have been trying to get the examples included in this article
> (http://wso2.org/library/1092) working, but am having trouble.
>
> I've deployed the RMSampleService exactly as it comes from the Sandesha2
> distribution (I downloaded the src distro and built it myself using maven.)
> I modified the UserguideEchoClient class as attached, adding the relevant
> lines from the article (linked above).  I don't want to set
> useSeparateListener(true), since as the article suggests, this can raise
> issues with firewalls.  This is especially an issue in my security-conscious
> community.  So, what I'm after is using the same transport channel, either
> method 1 or method 2 under "WSRM 1.1" in the article.
>
> Incidentally, before specifying WSRM 1.1, the client and server work exactly
> as expected (with RM 1.0).
>
> When I specify WSRM 1.1, the client hangs.  I run it through TCPMon (port
> 9763, forwarding to Axis on 8080), and what I see is the following sequence
> of messages:
>
> <?xml version='1.0' encoding='UTF-8'?>
>
>    <soapenv:Envelope
> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
>
>       <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing">
>
>
> <wsa:To>http://127.0.0.1:9763/axis2/services/RMSampleService</wsa:To>
>
>
> <wsa:MessageID>urn:uuid:DA7CB5DE7E858547DE1220502299733</wsa:MessageID>
>
>
> <wsa:Action>http://docs.oasis-open.org/ws-rx/wsmc/200702/MakeConnection</wsa:Action>
>
>       </soapenv:Header>
>
>       <soapenv:Body>
>
>          <wsmc:MakeConnection
> xmlns:wsmc="http://docs.oasis-open.org/ws-rx/wsmc/200702">
>
>
> <wsmc:Address>http://docs.oasis-open.org/ws-rx/wsmc/200702/anonymous?id=urn:uuid:DA7CB5DE7E858547DE1220502299582</wsmc:Address>
>
>          </wsmc:MakeConnection>
>
>       </soapenv:Body>
>
>    </soapenv:Envelope>
>
> Then:
>
> <?xml version='1.0' encoding='UTF-8'?>
>
>    <soapenv:Envelope
> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
>
>       <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing">
>
>
> <wsa:To>http://127.0.0.1:9763/axis2/services/RMSampleService</wsa:To>
>
>          <wsa:ReplyTo>
>
>
> <wsa:Address>http://docs.oasis-open.org/ws-rx/wsmc/200702/anonymous?id=urn:uuid:DA7CB5DE7E858547DE1220502299582</wsa:Address>
>
>          </wsa:ReplyTo>
>
>
> <wsa:MessageID>urn:uuid:DA7CB5DE7E858547DE1220502299599</wsa:MessageID>
>
>
> <wsa:Action>http://docs.oasis-open.org/ws-rx/wsrm/200702/CreateSequence</wsa:Action>
>
>       </soapenv:Header>
>
>       <soapenv:Body>
>
>          <wsrm:CreateSequence
> xmlns:wsrm="http://docs.oasis-open.org/ws-rx/wsrm/200702">
>
>             <wsrm:AcksTo>
>
>                <wsa:Address
> xmlns:wsa="http://www.w3.org/2005/08/addressing">http://docs.oasis-open.org/ws-rx/wsmc/200702/anonymous?id=urn:uuid:DA7CB5DE7E858547DE1220502299582</wsa:Address>
>
>             </wsrm:AcksTo>
>
>             <wsrm:Offer>
>
>
> <wsrm:Identifier>urn:uuid:DA7CB5DE7E858547DE1220502299453</wsrm:Identifier>
>
>                <wsrm:Endpoint>
>
>                   <wsa:Address
> xmlns:wsa="http://www.w3.org/2005/08/addressing">http://www.w3.org/2005/08/addressing/anonymous</wsa:Address>
>
>                </wsrm:Endpoint>
>
>             </wsrm:Offer>
>
>          </wsrm:CreateSequence>
>
>       </soapenv:Body>
>
>    </soapenv:Envelope>
>
> Then two of these (identical):
>
> <?xml version='1.0' encoding='UTF-8'?>
>
>    <soapenv:Envelope
> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
>
>       <soapenv:Header xmlns:wsa="http://www.w3.org/2005/08/addressing">
>
>
> <wsa:To>http://127.0.0.1:9763/axis2/services/RMSampleService</wsa:To>
>
>
> <wsa:MessageID>urn:uuid:DA7CB5DE7E858547DE1220502302756</wsa:MessageID>
>
>
> <wsa:Action>http://docs.oasis-open.org/ws-rx/wsmc/200702/MakeConnection</wsa:Action>
>
>       </soapenv:Header>
>
>       <soapenv:Body>
>
>          <wsmc:MakeConnection
> xmlns:wsmc="http://docs.oasis-open.org/ws-rx/wsmc/200702">
>
>
> <wsmc:Address>http://docs.oasis-open.org/ws-rx/wsmc/200702/anonymous?id=urn:uuid:DA7CB5DE7E858547DE1220502299582</wsmc:Address>
>
>          </wsmc:MakeConnection>
>
>       </soapenv:Body>
>
>    </soapenv:Envelope>
>
> Then another CreateSequence message like the one above, then four
> MakeConnection messages, then a CreateSequence, and so on exponentially.
> Each message has zero-length content in the http response.  Each response
> message has a "202 Accepted" status in it.
>
> Any idea what might be going wrong?
>
> Thanks much for any assistance you can provide.
>
> --Scott
>
> Scott Came
>
> Director, Systems and Technology
>
> SEARCH--The National Consortium for Justice Information and Statistics
>
> (916) 212-5978
>
> (916) 392-2550 x311
>
> [email protected]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>