part size for LTO8

David Simpson <[email protected]>
Newsgroups gmane.comp.archivers.amanda.user
Message-ID <CWLP265MB0738736A89044978C09DBA68BE789@CWLP265MB0738.GBRP265.PROD.OUTLOOK.COM> 
Does the 1/10 rule make sense for LTO8 part size?

Currently running with 1/10, but am considering making it smaller and also further chopping down DLEs (dividing to smaller). Interested to know what others are running with.

I'm also still using default chunksize. Have a large holding disk of 33TB (raid6) which is dedicated to this library drive/config. I've not got LEOM.

thanks

-------------
David Simpson - Senior Systems Engineer
ARCCA, Redwood Building,
King Edward VII Avenue,
Cardiff, CF10 3NB

David Simpson - peiriannydd uwch systemau
ARCCA, Adeilad Redwood,
King Edward VII Avenue,
Caerdydd, CF10 3NB
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.