Re: Fwd: [Ardour-Cvs] Ardour source branch meterbridge updated. 3.2-153-gf885622
"Axel 'the C.L.A.' Müller" <[email protected]>
| Newsgroups | gmane.comp.audio.ardour.devel |
|---|---|
| Message-ID | <[email protected]> |
On Sat, 06 Jul 2013 22:48:48 +0200 Jörn Nettingsmeier <[email protected]> wrote: > fwiw, the current implementation in ardour is not foolproof either: > when i overload my micstasies, the peak indicator will show 0.0dB but > not turn red, so i've learned to look for the numbers rather than the > color. of course, it could also be that the preamp does not ever deliver > fullscale for some reason... ...wich is a good reason for having an arbitrary configurable level for triggering the clip indicator (during recording) - working around hardware limitations (or features), warning if a preferred peak level is exceeded, etc... As allready discussed on IRC it might be useful to have different settings for different places in the signal chain - lower/arbitrary level for metering input signals ("in" meter point), simple 0 dBFS detection on channels and buses when mixing (pre/post meter point), oversampled peak meter on the master for capturing inter-sample peaks and so on. _______________________________________________ ardour-dev mailing list [email protected] http://lists.ardour.org/listinfo.cgi/ardour-dev-ardour.org