Re: Presonus StudioLive Ar16

>
> Why aren't you using the mixer's sub or aux groups, IOW why don't you
> record the signal provided by the mixer?


I need to track all 8 tracks individually.  There are only inserts on the
first 2 channels which i could use as a 'send' to utilize the mixers pre's,
but the rest of the channels dont have that.  Not to mention that i think
the Mackie's pre's are noisier than the vsl1818.


How would you link them together? Better get an ADAT device for
> additional 8 channels, two optical cables, a 75 Ω BNC cable, a 75 Ω BNC
> angle T connection and a 75 Ω terminator plug.


The Presonus vsl1818 has an ADAT so that 2 can be daisy chained together.

Thanks
--Brett





On Fri, Oct 6, 2017 at 2:41 PM, Ralf Mardorf <[email protected]>
wrote:

> On Fri, 6 Oct 2017 14:08:26 -0500, Brett Clark wrote:
> >2) Using a patchbay i split the input signals and sent one to the
> >vsl1818 and the other to a Mackie mixer for monitoring.
>
> Why aren't you using the mixer's sub or aux groups, IOW why don't you
> record the signal provided by the mixer?
>
> >My options seem to be:
> > A)  get another vsl1818 and link them together to get 16 audio
> > channels
>
> How would you link them together? Better get an ADAT device for
> additional 8 channels, two optical cables, a 75 Ω BNC cable, a 75 Ω BNC
> angle T connection and a 75 Ω terminator plug.
> _______________________________________________
> Ardour-Users mailing list
> [email protected]
> To unsubscribe  or change your mailing preferences please visit:
> http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
>

_______________________________________________
Ardour-Users mailing list
[email protected]
To unsubscribe  or change your mailing preferences please visit:
http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org