Re: Plug - in

aishwarya selvaraj <[email protected]>
Newsgroups gmane.comp.audio.audacity.general
Message-ID <CACWTKSpgGOgjn_PgwOkTOuiCK+qx2oxopaEVeHnkagmvFS=jow@mail.gmail.com>
Apologize if this mail appears more than once in your inbox , It was
continuously bouncing back.
@Gale Andrews
> If you are seeing no change at all, it seems like you are making some
mistake.
> Is the modified file called exactly ChangeTempo.cpp?
> Share the modified file and mention operating system

Sorry for the delay in responding.

1) All I did was replace the existing ChangeTemp.cpp code with my .cpp code
.
I complied the code and binary file was present in the same folder .
Then I restarted Audacity to see the changes , unfortunately there was no
changes .Defnetly I'm missing something here ,Could you shed some light ?

2) I would have to discuss with my advisor to share the code with the team
,kindly excuse for a while .(I'm waiting for my Proff's reply , would be
able to update you on that soon enough).

In my algorithm for time scaling , Upon running I need to enter a factor
between* 0.5 - 2  *. 0.5 factor would scale down the speech signal and play
the signal at a slow rate , while factor 2 would would speed up the speech
signal .
In Pitch scaling : Similarly enter the factor between *0.5 -2  *, 0.5 would
change the pitch to a male voice (more base ) while factor 2 would result
in a higher pitch resembling a female voice .

The only input to my code is a input speech signal and a scale factor.

3) I use Linux 16.04version , To compile my .cpp code I use gcc , with two
depended libraries (armadillo and libsndfile)


PS :
I tried attaching the resultant audio files , but its bouncing back due to
its huge size .I shall forward them in my next mail if reuired



On Mon, Dec 19, 2016 at 5:38 PM, aishwarya selvaraj <
[email protected]> wrote:

> @Gale Andrews
> > If you are seeing no change at all, it seems like you are making some
> mistake.
> > Is the modified file called exactly ChangeTempo.cpp?
> > Share the modified file and mention operating system
>
> Sorry for the delay in responding.
>
> 1) All I did was replace the existing ChangeTemp.cpp code with my .cpp
> code .
> I complied the code and binary file was present in the same folder .
> Then I restarted Audacity to see the changes , unfortunately there was no
> changes .Defnetly I'm missing something here ,Could you shed some light ?
>
> 2) I would have to discuss with my advisor to share the code with the team
> ,kindly excuse for a while .(I'm waiting for my Proff's reply , would be
> able to update you on that soon enough).
>
> In my algorithm for time scaling , Upon running I need to enter a factor
> between* 0.5 - 2  *. 0.5 factor would scale down the speech signal and
> play the signal at a slow rate , while factor 2 would would speed up the
> speech signal .
> In Pitch scaling : Similarly enter the factor between *0.5 -2  *, 0.5
> would change the pitch to a male voice (more base ) while factor 2 would
> result in a higher pitch resembling a female voice .
> PFA of the audio files .
> The only input to my code is a input speech signal and a scale factor.
>
> 3) I use Linux 16.04version , To compile my .cpp code I use gcc , with
> two depended libraries (armadillo and libsndfile)
>
>
>
>
> On Fri, Dec 16, 2016 at 9:21 PM, Gale Andrews <[email protected]>
> wrote:
>
>> If you are seeing no change at all, it seems like you are making some
>> mistake. Is the modified file called exactly ChangeTempo.cpp?
>>
>> You might be able to get some help with that here:
>> http://forum.audacityteam.org/viewforum.php?f=19
>>
>> but you will need to be willing to share the modified file and say what
>> operating system you are using.
>>
>>
>>
>> Gale
>>
>>
>> On 16 December 2016 at 14:07, Steve the Fiddle <[email protected]>
>> wrote:
>> > On 16 December 2016 at 13:30, aishwarya selvaraj
>> > <[email protected]> wrote:
>> >> Hi,
>> >> @Steve the Fiddle Thanks for your response .
>> >> Even though I dint try the Nyquist you mentioned in your previous
>> mail, I
>> >> tried the other method .
>> >> So in the Source Code of ChangeTempo.cpp I replaced it with my .cpp
>> file and
>> >> compiled it.
>> >> After restarting Audacity , nothing changed , the dialogue appeared
>> the same
>> >> way it has appeared before and I dint include any such dialogue box in
>> my
>> >> code.
>> >> Could you help me out ?
>> >
>> > I'm only starting to learn C++ myself, so I don't think I'm able to
>> > offer mentoring.
>> > I have a lot more experience with Nyquist. If you'd like to discus the
>> > feasibility of implementing your algorithm in Nyquist, I'd be happy to
>> > discus it with you on the Nyquist Plug-in forum:
>> > http://forum.audacityteam.org/viewforum.php?f=42
>> >
>> > Steve
>> >
>> >> After coping my code into the already existing code ,What should be
>> done ?
>> >>
>> >> On Thu, Dec 15, 2016 at 10:35 PM, aishwarya selvaraj
>> >> <[email protected]> wrote:
>> >>>
>> >>> Thanks for the reply .
>> >>> I shall check  with the details and get back .
>> >>>
>> >>> On Thu, Dec 15, 2016 at 7:53 PM, Steve the Fiddle
>> >>> <[email protected]> wrote:
>> >>>>
>> >>>> On 15 December 2016 at 09:42, aishwarya selvaraj
>> >>>> <[email protected]> wrote:
>> >>>> > Hi Gale,
>> >>>> > Thanks for replying .
>> >>>> > Apologize for late reply.
>> >>>> > (If this mail appeared twice in your inbox , apologize .It was
>> listed
>> >>>> > as
>> >>>> > huge file So I had to do some editing in the mail.)
>> >>>> >
>> >>>> > I would like to clarify a few things .
>> >>>> > 1) I have developed a Pitch/Time Scaling algorithm , and I have the
>> >>>> > respective code for it in Matlab and .cpp format.
>> >>>> > 2) I just want to create a plug-in in Audacity locally .(Only in
>> the
>> >>>> > Audacity I'm using in my system)
>> >>>> >
>> >>>> > I want to know is there a way to create such user defined
>> plug-in's to
>> >>>> > Audacity.
>> >>>>
>> >>>> Audacity provides a built-in scripting language called Nyquist, which
>> >>>> provides an easy way for users to create their own plug-ins. However
>> I
>> >>>> don't know how suitable it will be for your code as you have not
>> shown
>> >>>> us your code.
>> >>>>
>> >>>> Information about Nyquist plug-ins here:
>> >>>> http://wiki.audacityteam.org/wiki/Nyquist_Plug-ins_Reference
>> >>>>
>> >>>> If Nyquist is not suitable, then the easiest approach for your own
>> >>>> use, would probably be to copy "Change Pitch" and "Change Tempo" from
>> >>>> the Audacity 2.1.2 source code into the current source code, and
>> >>>> modify them with your algorithm.
>> >>>> (I suggest modifying the 2.1.2 versions rather than the 2.1.3
>> versions
>> >>>> because the older versions are simpler).
>> >>>>
>> >>>> Steve
>> >>>>
>> >>>> > If yes , how do I do it .Can I make use of the .cpp files ?What is
>> the
>> >>>> > procedure ?
>> >>>> >
>> >>>> > As mentioned in your previous mail , I have attached time/pitch
>> scaled
>> >>>> > Speech signals with the mail.
>> >>>> > The input Speech file is in Hindi .I hope it's fine .(Only the
>> effect
>> >>>> > is
>> >>>> > important)
>> >>>> > hindi.wav -Original Sound file
>> >>>> > timescale_2 - time scaled bya fcator of 2
>> >>>> > pitchscale_2 - pitch scaled by a factor of 2
>> >>>> >
>> >>>> >
>> >>>> > PS:
>> >>>> > I dont want to include these plugin in Audacity to be available
>> >>>> > globally for
>> >>>> > the time being .
>> >>>> >
>> >>>> >
>> >>>> > Hoping for your reply.
>> >>>> >
>> >>>> > On Sun, Dec 11, 2016 at 10:20 PM, Gale Andrews <
>> [email protected]>
>> >>>> > wrote:
>> >>>> >>
>> >>>> >> Hi Aishwarya,
>> >>>> >>
>> >>>> >> Thanks for writing.
>> >>>> >>
>> >>>> >> However you might be better posting this on our developers list:
>> >>>> >> https://lists.sourceforge.net/lists/listinfo/audacity-devel .
>> >>>> >>
>> >>>> >> Please let them know there in what ways your algorithm differs
>> from
>> >>>> >> the SBSMS algorithm we already use in Sliding Time Scale / Pitch
>> >>>> >> Shift.
>> >>>> >>
>> >>>> >> References:
>> >>>> >> http://sbsms.sourceforge.net/
>> >>>> >>
>> >>>> >> http//manual.audacityteam.org/man/sliding_time_scale_pitch_s
>> hift.html
>> >>>> >> .
>> >>>> >>
>> >>>> >> You can build your plugin in any format that Audacity supports
>> (VST,
>> >>>> >> LV2
>> >>>> >> and so on) then add it to your copy of Audacity using Effect >
>> Add /
>> >>>> >> Remove
>> >>>> >> Plug-ins... .
>> >>>> >>
>> >>>> >> http://wiki.audacityteam.org/wiki/Creating_your_own_Plug-in .
>> >>>> >>
>> >>>> >>
>> >>>> >> Gale
>> >>>> >>
>> >>>> >>
>> >>>> >> On 11 December 2016 at 09:31, aishwarya selvaraj
>> >>>> >> <[email protected]> wrote:
>> >>>> >> >
>> >>>> >> > Hi Everyone ,
>> >>>> >> > Myself Aishwarya. a Researcher from India working on Speech
>> Signal
>> >>>> >> > Processing .
>> >>>> >> > I have developed a time/pitch scaling algorithm .
>> >>>> >> > I have the corresponding .cpp script and matlab code for the
>> same.
>> >>>> >> > I want to include time /pitch scaling in audacity as well.
>> >>>> >> > I would want to know how to create user defined plugins in
>> Audacity
>> >>>> >> > .
>> >>>> >> > Is it possible ?Can anyone guide me ?
>> >>>> >> >
>> >>>> >> > Hoping for reply .
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > --
>> >>>> >> > Regards,
>> >>>> >> > Aishwarya Selvaraj
>> >>>> >> >
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > ------------------------------------------------------------
>> ------------------
>> >>>> >> > Developer Access Program for Intel Xeon Phi Processors
>> >>>> >> > Access to Intel Xeon Phi processor-based developer platforms.
>> >>>> >> > With one year of Intel Parallel Studio XE.
>> >>>> >> > Training and support from Colfax.
>> >>>> >> > Order your platform today.http://sdm.link/xeonphi
>> >>>> >> > *********** ASKING FOR HELP *************
>> >>>> >> >
>> >>>> >> > When asking for help on this list, please include the following
>> >>>> >> > information,
>> >>>> >> > so we can
>> >>>> >> > help you properly:
>> >>>> >> >
>> >>>> >> > * What operating system you are using (for example, Windows XP
>> or
>> >>>> >> > Mac OS
>> >>>> >> > X
>> >>>> >> > 10.5.1)
>> >>>> >> >
>> >>>> >> > * Exactly what three digit version number of Audacity you are
>> using
>> >>>> >> > (Help >
>> >>>> >> > About
>> >>>> >> >    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >>>> >> >
>> >>>> >> > * If this is a recording problem, what equipment you are
>> recording
>> >>>> >> > with,
>> >>>> >> > and
>> >>>> >> > how is it
>> >>>> >> >    connected to the computer?
>> >>>> >> >
>> >>>> >> > Mailing list: [email protected]
>> >>>> >> > To UNSUBSCRIBE, use the form at the bottom of this web page:
>> >>>> >> > https://lists.sourceforge.net/lists/listinfo/audacity-users
>> >>>> >>
>> >>>> >>
>> >>>> >>
>> >>>> >> ------------------------------------------------------------
>> ------------------
>> >>>> >> Developer Access Program for Intel Xeon Phi Processors
>> >>>> >> Access to Intel Xeon Phi processor-based developer platforms.
>> >>>> >> With one year of Intel Parallel Studio XE.
>> >>>> >> Training and support from Colfax.
>> >>>> >> Order your platform today.http://sdm.link/xeonphi
>> >>>> >> *********** ASKING FOR HELP *************
>> >>>> >>
>> >>>> >> When asking for help on this list, please include the following
>> >>>> >> information, so we can
>> >>>> >> help you properly:
>> >>>> >>
>> >>>> >> * What operating system you are using (for example, Windows XP or
>> Mac
>> >>>> >> OS X
>> >>>> >> 10.5.1)
>> >>>> >>
>> >>>> >> * Exactly what three digit version number of Audacity you are
>> using
>> >>>> >> (Help
>> >>>> >> > About
>> >>>> >>    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >>>> >>
>> >>>> >> * If this is a recording problem, what equipment you are recording
>> >>>> >> with,
>> >>>> >> and how is it
>> >>>> >>    connected to the computer?
>> >>>> >>
>> >>>> >> Mailing list: [email protected]
>> >>>> >> To UNSUBSCRIBE, use the form at the bottom of this web page:
>> >>>> >> https://lists.sourceforge.net/lists/listinfo/audacity-users
>> >>>> >
>> >>>> >
>> >>>> >
>> >>>> >
>> >>>> > --
>> >>>> > Regards,
>> >>>> > Aishwarya Selvaraj
>> >>>> >
>> >>>> >
>> >>>> > ------------------------------------------------------------
>> ------------------
>> >>>> > Check out the vibrant tech community on one of the world's most
>> >>>> > engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> >>>> > *********** ASKING FOR HELP *************
>> >>>> >
>> >>>> > When asking for help on this list, please include the following
>> >>>> > information,
>> >>>> > so we can
>> >>>> > help you properly:
>> >>>> >
>> >>>> > * What operating system you are using (for example, Windows XP or
>> Mac
>> >>>> > OS X
>> >>>> > 10.5.1)
>> >>>> >
>> >>>> > * Exactly what three digit version number of Audacity you are using
>> >>>> > (Help >
>> >>>> > About
>> >>>> >    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >>>> >
>> >>>> > * If this is a recording problem, what equipment you are recording
>> >>>> > with, and
>> >>>> > how is it
>> >>>> >    connected to the computer?
>> >>>> >
>> >>>> > Mailing list: [email protected]
>> >>>> > To UNSUBSCRIBE, use the form at the bottom of this web page:
>> >>>> > https://lists.sourceforge.net/lists/listinfo/audacity-users
>> >>>>
>> >>>>
>> >>>> ------------------------------------------------------------
>> ------------------
>> >>>> Check out the vibrant tech community on one of the world's most
>> >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> >>>> *********** ASKING FOR HELP *************
>> >>>>
>> >>>> When asking for help on this list, please include the following
>> >>>> information, so we can
>> >>>> help you properly:
>> >>>>
>> >>>> * What operating system you are using (for example, Windows XP or
>> Mac OS
>> >>>> X 10.5.1)
>> >>>>
>> >>>> * Exactly what three digit version number of Audacity you are using
>> (Help
>> >>>> > About
>> >>>>    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >>>>
>> >>>> * If this is a recording problem, what equipment you are recording
>> with,
>> >>>> and how is it
>> >>>>    connected to the computer?
>> >>>>
>> >>>> Mailing list: [email protected]
>> >>>> To UNSUBSCRIBE, use the form at the bottom of this web page:
>> >>>> https://lists.sourceforge.net/lists/listinfo/audacity-users
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Regards,
>> >>> Aishwarya Selvaraj
>> >>
>> >>
>> >>
>> >>
>> >> --
>> >> Regards,
>> >> Aishwarya Selvaraj
>> >>
>> >> ------------------------------------------------------------
>> ------------------
>> >> Check out the vibrant tech community on one of the world's most
>> >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> >> *********** ASKING FOR HELP *************
>> >>
>> >> When asking for help on this list, please include the following
>> information,
>> >> so we can
>> >> help you properly:
>> >>
>> >> * What operating system you are using (for example, Windows XP or Mac
>> OS X
>> >> 10.5.1)
>> >>
>> >> * Exactly what three digit version number of Audacity you are using
>> (Help >
>> >> About
>> >>    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >>
>> >> * If this is a recording problem, what equipment you are recording
>> with, and
>> >> how is it
>> >>    connected to the computer?
>> >>
>> >> Mailing list: [email protected]
>> >> To UNSUBSCRIBE, use the form at the bottom of this web page:
>> >> https://lists.sourceforge.net/lists/listinfo/audacity-users
>> >
>> > ------------------------------------------------------------
>> ------------------
>> > Check out the vibrant tech community on one of the world's most
>> > engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> > *********** ASKING FOR HELP *************
>> >
>> > When asking for help on this list, please include the following
>> information, so we can
>> > help you properly:
>> >
>> > * What operating system you are using (for example, Windows XP or Mac
>> OS X 10.5.1)
>> >
>> > * Exactly what three digit version number of Audacity you are using
>> (Help > About
>> >    Audacity, or Audacity >  About Audacity on a Mac computer)
>> >
>> > * If this is a recording problem, what equipment you are recording
>> with, and how is it
>> >    connected to the computer?
>> >
>> > Mailing list: [email protected]
>> > To UNSUBSCRIBE, use the form at the bottom of this web page:
>> > https://lists.sourceforge.net/lists/listinfo/audacity-users
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> *********** ASKING FOR HELP *************
>>
>> When asking for help on this list, please include the following
>> information, so we can
>> help you properly:
>>
>> * What operating system you are using (for example, Windows XP or Mac OS
>> X 10.5.1)
>>
>> * Exactly what three digit version number of Audacity you are using (Help
>> > About
>>    Audacity, or Audacity >  About Audacity on a Mac computer)
>>
>> * If this is a recording problem, what equipment you are recording with,
>> and how is it
>>    connected to the computer?
>>
>> Mailing list: [email protected]
>> To UNSUBSCRIBE, use the form at the bottom of this web page:
>> https://lists.sourceforge.net/lists/listinfo/audacity-users
>>
>
>
>
> --
> Regards,
> Aishwarya Selvaraj
>



-- 
Regards,
Aishwarya Selvaraj

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

*********** ASKING FOR HELP *************

When asking for help on this list, please include the following information, so we can 
help you properly: 

* What operating system you are using (for example, Windows XP or Mac OS X 10.5.1)   

* Exactly what three digit version number of Audacity you are using (Help > About 
   Audacity, or Audacity >  About Audacity on a Mac computer)   

* If this is a recording problem, what equipment you are recording with, and how is it 
   connected to the computer?

Mailing list: [email protected]
To UNSUBSCRIBE, use the form at the bottom of this web page:
https://lists.sourceforge.net/lists/listinfo/audacity-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.