Re: poor quality & glitches - all tracks on CD show unreported loss of streaming
Mikko Nummelin <[email protected]>
| Newsgroups | gmane.comp.audio.cd-paranoia.general |
|---|---|
| Message-ID | <[email protected]> |
On Fri, 24 Oct 2003, Laurent Pinchart wrote: >> Hi David, all, >> my cd drive is a Sony CDU 4811, plain old IDE. Can I set this up with >> SCSI emulation? It seems from my config that I've got module SCSI >> emulation compiled into my kernel already. Would I then have to >> configure the drive in fstab or something? >> I do have SCSI but that's on an old server machine with windows NT on it. > For SCSI emulation to work properly, you need three components: > 1) SCSI emulation support in the Linux kernel > 2) SCSI CD support in the Linux kernel > 3) hdx=ide-scsi in the kernel paramaters > You have the SCSI emulation compiled in your kernel already so you probably > have SCSI CD support too. To modify the kernel parameters, you can add > append="hdx=ide-scsi" (replace hdx by your IDE CD device, hda, hdb, hdc or > hdd) > in /etc/lilo.conf if you use lilo as your boot loader (man lilo.conf for more > information). Don't forget to run lilo after. One thing of practical importance to remember is, that when SCSI emulation is ON, then the drive /dev/hdx does not work, but the device should then be referenced by /dev/sg0 or /dev/sr0, especially when ripping with CDParanoia, i.e. # cdparanoia -v -B -d /dev/sr0 1-13 Then it is also possible to use the patch I already mentioned and run CDParanoia with it, i.e. # cdparanoia -v -B -P -d /dev/sr0 1-13 , which is known to help with some of the problems described with copy-protected CD's. Mikko Nummelin --- >8 ---- List archives: http://www.xiph.org/archives/ Paranoia homepage: http://www.xiph.org/paranoia/ To unsubscribe from this list, send a message to '[email protected]' containing only the word 'unsubscribe' in the body. No subject is needed. Unsubscribe messages sent to the list will be ignored/filtered.