Cannot rip from LG DVD-ROM DRN8080B 1.03

Robert Delahunt <[email protected]>
Newsgroups gmane.comp.audio.cd-paranoia.general
Message-ID <[email protected]>
cdparanoia -Bsv
cdparanoia III release 9.8 (March 23, 2001)
(C) 2001 Monty <[email protected]> and Xiphophorus

Report bugs to [email protected]
http://www.xiph.org/paranoia/

Checking /dev/cdrom for cdrom...
        Testing /dev/cdrom for cooked ioctl() interface
                /dev/sg0 is not a cooked ioctl CDROM.
        Testing /dev/cdrom for SCSI interface
                generic device: /dev/sg0
                ioctl device: /dev/scd0

Found an accessible SCSI CDROM drive.
Looking at revision of the SG interface in use...
        SG interface version 3.1.24; OK.

CDROM model sensed sensed: LG DVD-ROM DRN8080B 1.03

Checking for SCSI emulation...
        Drive is ATAPI (using SCSI host adaptor emulation)

Checking for MMC style command set...
        Drive is MMC style
        DMA scatter/gather table entries: 256
        table entry size: 32768 bytes
        maximum theoretical transfer: 3566 sectors
        Setting default read size to 13 sectors (30576 bytes).

Verifying CDDA command set...
        Expected command set FAILED!
        Performing full probe for CDDA command set...
        test -> density: [none    ]  command: [28 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [28 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [a8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [a8 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [be 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [be 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [b9 00,10]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [b9 00,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [b9 04,f8]
                Drive rejected read command packet(s)
        test -> density: [none    ]  command: [d4(10)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(10)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d4(12)0x]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d4(12)0x]
                Drive rejected density set
        test -> density: [none    ]  command: [d5 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d5 0x,00]
                Drive rejected density set
        test -> density: [none    ]  command: [d8 0x,00]
                Drive rejected read command packet(s)
        test -> density: [yes/0x00]  command: [d8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x04]  command: [d8 0x,00]
                Drive rejected density set
        test -> density: [yes/0x81]  command: [d8 0x,00]
                Drive rejected density set
        Unable to find any suitable command set from probe;
        drive probably not CDDA capable.
006: Could not read any data from drive

Cdparanoia could not find a way to read audio from this drive.


-- 
The rule on staying alive as a forcaster is to give 'em a number or
give 'em a date, but never give 'em both at once.
		-- Jane Bryant Quinn

--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.