problems ripping cds

himba <[email protected]>
Newsgroups gmane.comp.audio.cd-paranoia.general
Message-ID <[email protected]>
hello

I was courios about audio CD ripping under linux and ran into cdparonia 
project. I'm runing Suse9 and have currently installed a CDROM and CDRW 
ATAPI devices. Both are using ide-scsi module. I can get CD track info, 
but I can't rip none of my audio CDs. The light on device is lit, but 
kernel log has several reports:
....
Jan 12 16:56:10 xodus kernel: scsi : aborting command due to timeout : 
pid 517, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00 00 00 00 00 00 
00 07 f8 00 00
Jan 12 16:56:10 xodus kernel: hdc: lost interrupt
Jan 12 16:56:10 xodus kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data
Jan 12 16:56:10 xodus kernel: ide-scsi: [[ be 0 0 0 0 0 0 0 7 f8 0 0 ]
Jan 12 16:56:10 xodus kernel: ]
Jan 12 16:56:10 xodus kernel: ide-scsi: expected 16464 got 18816 limit 16464
Jan 12 16:56:10 xodus kernel: ide-scsi: transferred 7056 of 9408 bytes
Jan 12 16:57:10 xodus kernel: scsi : aborting command due to timeout : 
pid 520, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00 00 00 00 21 00 
00 0d f8 00 00
Jan 12 16:57:10 xodus kernel: hdc: lost interrupt
Jan 12 16:57:10 xodus kernel: hdc: irq timeout: status=0xd0 { Busy }
Jan 12 16:57:10 xodus kernel: hdc: ATAPI reset complete
Jan 12 16:57:10 xodus kernel: hdc: irq timeout: status=0x80 { Busy }
Jan 12 16:57:10 xodus kernel: hdc: ATAPI reset complete
Jan 12 16:57:10 xodus kernel: hdc: irq timeout: status=0x80 { Busy }
....

I'm using SCSI emulation.

Is there a way to remedy this?

rgds.himba
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.