cdparanoia with RICOH DVD/CDRW MP9200 1.30 and SuSE Linux 8.0

[email protected] (Rainer Lehrig)
Newsgroups gmane.comp.audio.cd-paranoia.general
Message-ID <[email protected]>
Hi,

I have a problem reading audio tracks with cdparanoia on a RICOH DVD/CDRW 
MP9200 1.30 and SuSE Linux 8.0
On a different computer with real SCSI devices cdparanoia works correctly.

Question:
Can I make additional adjustments in the SCSI emulation or do you know 
anything about this problem ?

Yours:
Rainer Lehrig

------------------------------------------------------------------------------------------------------------
lehrig2:/home/lehrig/mp3 # cdparanoia -v -d /dev/scd0 -B 1-
cdparanoia III release 9.8 (March 23, 2001)
(C) 2001 Monty <[email protected]> and Xiphophorus

Report bugs to [email protected]
http://www.xiph.org/paranoia/

Checking /dev/scd0 for cdrom...
        Testing /dev/scd0 for cooked ioctl() interface
                /dev/scd0 is not a cooked ioctl CDROM.
        Testing /dev/scd0 for SCSI interface
                generic device: /dev/sg0
                ioctl device: /dev/scd0

Found an accessible SCSI CDROM drive.
Looking at revision of the SG interface in use...
        SG interface version 3.1.22; OK.

CDROM model sensed sensed: RICOH DVD/CDRW MP9200 1.30

Checking for SCSI emulation...
        Drive is ATAPI (using SCSI host adaptor emulation)

Checking for MMC style command set...
        Drive is MMC style
        DMA scatter/gather table entries: 256
        table entry size: 32768 bytes
        maximum theoretical transfer: 3566 sectors
        Setting default read size to 13 sectors (30576 bytes).

Verifying CDDA command set...
        Expected command set reads OK.

Table of contents (audio tracks only):
track        length               begin        copy pre ch
===========================================================
  1.    10650 [02:22.00]        0 [00:00.00]    OK   no  2
  2.    13892 [03:05.17]    10650 [02:22.00]    OK   no  2
  3.    12041 [02:40.41]    24542 [05:27.17]    OK   no  2
  4.    12385 [02:45.10]    36583 [08:07.58]    OK   no  2
  5.    13311 [02:57.36]    48968 [10:52.68]    OK   no  2
  6.    14665 [03:15.40]    62279 [13:50.29]    OK   no  2
  7.    11597 [02:34.47]    76944 [17:05.69]    OK   no  2
  8.    11662 [02:35.37]    88541 [19:40.41]    OK   no  2
  9.    13167 [02:55.42]   100203 [22:16.03]    OK   no  2
 10.    11085 [02:27.60]   113370 [25:11.45]    OK   no  2
 11.    16499 [03:39.74]   124455 [27:39.30]    OK   no  2
 12.    13734 [03:03.09]   140954 [31:19.29]    OK   no  2
TOTAL  154688 [34:22.38]    (audio only)

Ripping from sector       0 (track  1 [0:00.00])
          to sector  154687 (track 12 [3:03.08])

outputting to track01.cdda.wav


SCSI transport error: timeout waiting to read packet

scsi_read error: sector=0 length=7 retry=0
                 Sense key: 0 ASC: 0 ASCQ: 0
                 Transport error: Error reading command from device
                 System error: Success

SCSI transport error: timeout waiting to write packet

scsi_read error: sector=0 length=3 retry=1
                 Sense key: 0 ASC: 0 ASCQ: 0
                 Transport error: Error writing packet command to device
                 System error: Invalid argument
 (== PROGRESS == [>                             | ...... 00 ] == :-0 . ==)
SCSI transport error: timeout waiting to read packet

scsi_read error: sector=7 length=13 retry=0
                 Sense key: 0 ASC: 0 ASCQ: 0
                 Transport error: Error reading command from device
                 System error: Success

SCSI transport error: timeout waiting to write packet

scsi_read error: sector=7 length=6 retry=1
                 Sense key: 0 ASC: 0 ASCQ: 0
                 Transport error: Error writing packet command to device
                 System error: Invalid argument
 (== PROGRESS == [>                             | ...... 00 ] == :-0 0 ==)
SCSI transport error: timeout waiting to read packet

scsi_read error: sector=0 length=6 retry=0
                 Sense key: 0 ASC: 0 ASCQ: 0
                 Transport error: Error reading command from device
                 System error: Success



--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.