irq timeouts (Was: Re: scsi errors with cdparanoia and ide-scsi)

Hugo van der Merwe <[email protected]>
Newsgroups gmane.comp.audio.cd-paranoia.general
Message-ID <[email protected]>
> I often rip with my writer, as it is the best at reading through
> scratches. However, it being a writer, I access it through ide-scsi
> emulation since I need that to write. These days I often have trouble
> ripping though, problems I think a reboot might fix, but I refuse to
> reboot. I often try unloading and reloading modules, but this does not
> always work (maybe I don't unload enough?)

Turns out it's not a scsi problem, I just tried ripping with ide-cd, got
the following errors in my log files:

Sep 15 15:31:26 vervet kernel: hdc: irq timeout: status=0xc0 { Busy }
Sep 15 15:31:44 vervet kernel: hdc: ATAPI reset complete
Sep 15 15:31:44 vervet kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
Sep 15 15:31:44 vervet kernel: hdc: packet command error: error=0x50
Sep 15 15:31:44 vervet kernel: ATAPI device hdc:
Sep 15 15:31:44 vervet kernel:   Error: Illegal request -- (Sense key=0x05)
Sep 15 15:31:44 vervet kernel:   Invalid command operation code -- (asc=0x20, ascq=0x00)
Sep 15 15:31:44 vervet kernel:   The failed "Read CD" packet command was:
Sep 15 15:31:44 vervet kernel:   "be 04 00 00 00 4b 00 00 06 f8 00 00 "
Sep 15 15:32:00 vervet kernel: hdc: irq timeout: status=0xc0 { Busy }
Sep 15 15:32:19 vervet kernel: hdc: ATAPI reset complete
Sep 15 15:32:19 vervet kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
Sep 15 15:32:19 vervet kernel: hdc: packet command error: error=0x50
Sep 15 15:32:19 vervet kernel: ATAPI device hdc:
Sep 15 15:32:19 vervet kernel:   Error: Illegal request -- (Sense key=0x05)
Sep 15 15:32:19 vervet kernel:   Invalid command operation code -- (asc=0x20, ascq=0x00)
Sep 15 15:32:19 vervet kernel:   The failed "Read CD" packet command was:
Sep 15 15:32:19 vervet kernel:   "be 04 00 00 00 4b 00 00 07 f8 00 00 "
Sep 15 15:32:33 vervet kernel: hdc: irq timeout: status=0xc0 { Busy }

Any ideas?

Thanks,
Hugo
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.