Re: irq timeouts (Was: Re: scsi errors with cdparanoia and ide-scsi)

I have *exactly* the same problems here with both atapi drives (a Pioneer DVD
and a Traxdata cd writer) - both won't rip neither as scsi-emulated devs nor
in atapi mode. syslog looks the same. seems to be a kernel problem, as you
stated. haven't figured where exactly myself yet. strace outputs didn't shed
too much light either (or maybe I just don't see what I oughta see, so you
might strace for yourself and see).
What's ypur kernel setup liek, and what chipset/ide controller is said device
attached to?

I was told the ide support in 2.4.12 and up kernels wasn't too well, but I
haven't tried -ac patches yet since I got diff errors when I tried to apply
them.

If you'd like to see more outputs I logged, just tell me.

Dex

On Sun, 15 Sep 2002 15:36:50 +0200
Hugo van der Merwe <[email protected]> wrote:

> > I often rip with my writer, as it is the best at reading through
> > scratches. However, it being a writer, I access it through ide-scsi
> > emulation since I need that to write. These days I often have trouble
> > ripping though, problems I think a reboot might fix, but I refuse to
> > reboot. I often try unloading and reloading modules, but this does not
> > always work (maybe I don't unload enough?)
> 
> Turns out it's not a scsi problem, I just tried ripping with ide-cd, got
> the following errors in my log files:
> 
> Sep 15 15:31:26 vervet kernel: hdc: irq timeout: status=0xc0 { Busy }
> Sep 15 15:31:44 vervet kernel: hdc: ATAPI reset complete
> Sep 15 15:31:44 vervet kernel: hdc: packet command error: status=0x51 {
> DriveReady SeekComplete Error } Sep 15 15:31:44 vervet kernel: hdc: packet
> command error: error=0x50 Sep 15 15:31:44 vervet kernel: ATAPI device hdc:
> Sep 15 15:31:44 vervet kernel:   Error: Illegal request -- (Sense key=0x05)
> Sep 15 15:31:44 vervet kernel:   Invalid command operation code --
> (asc=0x20, ascq=0x00) Sep 15 15:31:44 vervet kernel:   The failed "Read CD"
> packet command was: Sep 15 15:31:44 vervet kernel:   "be 04 00 00 00 4b 00
> 00 06 f8 00 00 " Sep 15 15:32:00 vervet kernel: hdc: irq timeout:
> status=0xc0 { Busy } Sep 15 15:32:19 vervet kernel: hdc: ATAPI reset
> complete Sep 15 15:32:19 vervet kernel: hdc: packet command error:
> status=0x51 { DriveReady SeekComplete Error } Sep 15 15:32:19 vervet kernel:
> hdc: packet command error: error=0x50 Sep 15 15:32:19 vervet kernel: ATAPI
> device hdc: Sep 15 15:32:19 vervet kernel:   Error: Illegal request --
> (Sense key=0x05) Sep 15 15:32:19 vervet kernel:   Invalid command operation
> code -- (asc=0x20, ascq=0x00) Sep 15 15:32:19 vervet kernel:   The failed
> "Read CD" packet command was: Sep 15 15:32:19 vervet kernel:   "be 04 00 00
> 00 4b 00 00 07 f8 00 00 " Sep 15 15:32:33 vervet kernel: hdc: irq timeout:
> status=0xc0 { Busy }
> 
> Any ideas?
> 
> Thanks,
> Hugo
> --- >8 ----
> List archives:  http://www.xiph.org/archives/
> Paranoia homepage: http://www.xiph.org/paranoia/
> To unsubscribe from this list, send a message to '[email protected]'
> containing only the word 'unsubscribe' in the body.  No subject is needed.
> Unsubscribe messages sent to the list will be ignored/filtered.
> 


-- 
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS d--(+)@ s-:+ a-- C++(+++) UL>+++ P+>++ L++>++++ E-- W++ N+
o? K- w--(---) !O M-- V- PS+ PE(+) Y+>++ PGP- t+(++)
5 X+(++) R++ tv--(+)@ b++(+++) DI+++ D G++(--) e* h r%>* y?
------END GEEK CODE BLOCK------

Nothing fights like the opposition
--- >8 ----
List archives:  http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body.  No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.