Re: irq timeouts (Was: Re: scsi errors with cdparanoia and ide-scsi)
Ian Pilcher <[email protected]>
| Newsgroups | gmane.comp.audio.cd-paranoia.general |
|---|---|
| Message-ID | <[email protected]> |
>>
>>Sep 15 15:31:26 vervet kernel: hdc: irq timeout: status=0xc0 { Busy }
>>Sep 15 15:31:44 vervet kernel: hdc: ATAPI reset complete
>>Sep 15 15:31:44 vervet kernel: hdc: packet command error: status=0x51 {
>>DriveReady SeekComplete Error } Sep 15 15:31:44 vervet kernel: hdc: packet
>>command error: error=0x50 Sep 15 15:31:44 vervet kernel: ATAPI device hdc:
>>Sep 15 15:31:44 vervet kernel: Error: Illegal request -- (Sense key=0x05)
>>Sep 15 15:31:44 vervet kernel: Invalid command operation code --
>>(asc=0x20, ascq=0x00) Sep 15 15:31:44 vervet kernel: The failed "Read CD"
>>packet command was: Sep 15 15:31:44 vervet kernel: "be 04 00 00 00 4b 00
>>00 06 f8 00 00 " Sep 15 15:32:00 vervet kernel: hdc: irq timeout:
>>status=0xc0 { Busy } Sep 15 15:32:19 vervet kernel: hdc: ATAPI reset
>>complete Sep 15 15:32:19 vervet kernel: hdc: packet command error:
>>status=0x51 { DriveReady SeekComplete Error } Sep 15 15:32:19 vervet kernel:
>>hdc: packet command error: error=0x50 Sep 15 15:32:19 vervet kernel: ATAPI
>>device hdc: Sep 15 15:32:19 vervet kernel: Error: Illegal request --
>>(Sense key=0x05) Sep 15 15:32:19 vervet kernel: Invalid command operation
>>code -- (asc=0x20, ascq=0x00) Sep 15 15:32:19 vervet kernel: The failed
>>"Read CD" packet command was: Sep 15 15:32:19 vervet kernel: "be 04 00 00
>>00 4b 00 00 07 f8 00 00 " Sep 15 15:32:33 vervet kernel: hdc: irq timeout:
>>status=0xc0 { Busy }
>>
Do you by any chance have a VIA chipset with the 686B southbridge?
--
========================================================================
Ian Pilcher [email protected]
========================================================================
--- >8 ----
List archives: http://www.xiph.org/archives/
Paranoia homepage: http://www.xiph.org/paranoia/
To unsubscribe from this list, send a message to '[email protected]'
containing only the word 'unsubscribe' in the body. No subject is needed.
Unsubscribe messages sent to the list will be ignored/filtered.