Re: growisofs fail to burn second session: why and how to solve?
Zhang Weiwu <[email protected]>
| Newsgroups | gmane.comp.audio.cd-record |
|---|---|
| Message-ID | <[email protected]> |
On 10/23/2010 03:05 AM, Thomas Schmitt wrote:
> If you want to give xorriso or cdrskin a try then first post the outcome
> of their track catalog commands
> xorriso -outdev /dev/sr2 -toc
almustafa@orphalese:~$ xorriso -outdev /dev/sr2 -toc
xorriso 0.5.6 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev '/dev/sr2'
Media current: DVD+R/DL
Media status : is written , is appendable
Drive current: -outdev '/dev/sr2'
Drive type : vendor 'HL-DT-ST' product 'DVDRAM GP08NU20' revision '1.01'
Media current: DVD+R/DL
Media product: RITEK/S04/48 , Ritek Corp
Media status : is written , is appendable
TOC layout : Idx , sbsector , Size , Volume Id
xorriso : SORRY : Cannot obtain Table Of Content
xorriso : NOTE : Tolerated problem event of severity 'SORRY'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity SORRY
> cdrskin -v dev=/dev/sr2 -minfo
almustafa@orphalese:~$ cdrskin -v dev=/dev/sr2 -minfo
cdrskin 0.8.0 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr2'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: pseudo-atip on drive 0
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive"
scsidev: '3,0,0'
Device type : Removable CD-ROM
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GP08NU20'
Revision : '1.01'
Driver flags : BURNFREE
Supported modes: TAO SAO
cdrskin: burn_drive_get_write_speed = 8310 (6.0x)
Current: DVD+R/DL
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
book type: DVD+R/DL (emulated booktype)
Product Id: RITEK/S04/48
Producer: Ritek Corp
Manufacturer: 'RITEK'
Media type: 'S04'
Mounted media class: DVD
Mounted media type: DVD+R/DL
Disk Is not erasable
disk status: incomplete/appendable
session status: empty
first track: 1
number of sessions: 1
first track in last sess: 1
last track in last sess: 1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Blank 1624736 4173823 2549088
Next writable address: 1624736
Remaining writable size: 2549088
> which both will tell the perceived next writeable address. 1624736 would
> give hope.
>
So I try:
almustafa@orphalese:~$ genisoimage -C 0,1624736 -M /dev/sr2 -o /tmp/newbackup.iso -iso-level 3 -old-root / -R -exclude-list .exclude.lst -v -V ZWW_BACKUP .
[success output omitted]
almustafa@orphalese:~$ growisofs -M /dev/sr2=/tmp/newbackup.iso -v -dry-run
:-[ READ SESSION INFO failed with SK=5h/INVALID FIELD IN CDB]: Input/output error
> If you want to go on with investigating the problem together with me,
> then be invited to try it with my software
> http://scdbackup.sourceforge.net/cdrskin-0.8.8.pl00.tar.gz
Okay, so here we go:
almustafa@orphalese:~$ cdrskin -v -multi speed=1 gracetime=30
dev=/dev/sr2 /tmp/newbackup.iso
cdrskin 0.8.0 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr2'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: beginning to burn disc
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc
in the drive"
Current: DVD+R/DL
Track 01: data 347 MB
Total size: 347 MB (39:37.36) = 178152 sectors
Lout start: 347 MB (39:39/36) = 178152 sectors
Starting to write CD/DVD at speed 1 in real TAO mode for multi session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 1624736
Track 01: 347 of 347 MB written (fifo 100%) [buf 90%] 1.9x.
cdrskin: thank you for being patient for 146 seconds
Fixating...
cdrskin: working post-track (burning since 174 seconds)
Track 01: Total bytes read/written: 364855296/364871680 (178160
sectors).
Writing time: 174.806s
Cdrskin: fifo had 178152 puts and 178152 gets.
Cdrskin: fifo was 0 times empty and 15644 times full, min fill was 99%.
Min drive buffer fill was 0%
cdrskin: burning failed
cdrskin: FATAL : burning failed.
Strange that with -v it didn't give detail of fail.
Loading the 'burning failed' dvd and see what I got. Emmh, I got a DVD
that I can mount, and see the content of the first session, not the
second session.
Detail info about the DVD: (I put it in /dev/sr1 this time)
almustafa@orphalese:~$ dvd+rw-mediainfo /dev/sr1
INQUIRY: [PLEXTOR ][DVDR PX-716AL ][1.02]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Media ID: RITEK/S04
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
Write Speed #1: 2.4x1385=3324KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 4173824]
Speed Descriptor#0: 02/4173824 [email protected]=11080KB/s [email protected]=5540KB/s
Speed Descriptor#1: 02/4173824 [email protected]=11080KB/s [email protected]=3324KB/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: appendable
Number of Sessions: 1
State of Last Session: incomplete
"Next" Track: 1
Number of Tracks: 4
READ TRACK INFORMATION[#1]:
Track State: partial/complete
Track Start Address: 0*2KB
Free Blocks: 0*2KB
Track Size: 812352*2KB
READ TRACK INFORMATION[#2]:
Track State: partial/complete
Track Start Address: 812368*2KB
Next Writable Address: 812368*2KB
Free Blocks: 812352*2KB
Track Size: 812352*2KB
READ TRACK INFORMATION[#3]:
Track State: partial/complete
Track Start Address: 1624736*2KB
Free Blocks: 0*2KB
Track Size: 178160*2KB
READ TRACK INFORMATION[#4]:
Track State: blank
Track Start Address: 1802912*2KB
Next Writable Address: 1802912*2KB
Free Blocks: 2370912*2KB
Track Size: 2370912*2KB
FABRICATED TOC:
Track#1 : 17@0
Track#AA : 17@4294770689
Multi-session Info: #1@0
READ CAPACITY: 0*2048=0
almustafa@orphalese:~$ xorriso -outdev /dev/sr1 -toc
xorriso 0.5.6 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev '/dev/sr1'
Media current: DVD+R/DL
Media status : is written , is appendable
Drive current: -outdev '/dev/sr1'
Drive type : vendor 'PLEXTOR' product 'DVDR PX-716AL' revision '1.02'
Media current: DVD+R/DL
Media product: RITEK/S04/48 , Ritek Corp
Media status : is written , is appendable
TOC layout : Idx , sbsector , Size , Volume Id
xorriso : SORRY : Cannot obtain Table Of Content
xorriso : NOTE : Tolerated problem event of severity 'SORRY'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity SORRY
almustafa@orphalese:~$ xorriso -outdev /dev/sr1 -toc
xorriso 0.5.6 : RockRidge filesystem manipulator, libburnia project.
Drive current: -outdev '/dev/sr1'
Media current: DVD+R/DL
Media status : is written , is appendable
Drive current: -outdev '/dev/sr1'
Drive type : vendor 'PLEXTOR' product 'DVDR PX-716AL' revision '1.02'
Media current: DVD+R/DL
Media product: RITEK/S04/48 , Ritek Corp
Media status : is written , is appendable
TOC layout : Idx , sbsector , Size , Volume Id
xorriso : SORRY : Cannot obtain Table Of Content
xorriso : NOTE : Tolerated problem event of severity 'SORRY'
xorriso : NOTE : -return_with SORRY 32 triggered by problem severity SORRY
almustafa@orphalese:~$ cdrskin -v dev=/dev/sr1 -minfo
cdrskin 0.8.0 : limited cdrecord compatibility wrapper for libburn
cdrskin: verbosity level : 1
cdrskin: NOTE : greying out all drives besides given dev='/dev/sr1'
cdrskin: scanning for devices ...
cdrskin: ... scanning for devices done
cdrskin: pseudo-atip on drive 0
cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive"
scsidev: '2,0,0'
Device type : Removable CD-ROM
Vendor_info : 'PLEXTOR'
Identifikation : 'DVDR PX-716AL'
Revision : '1.02'
Driver flags : BURNFREE
Supported modes: TAO SAO
cdrskin: burn_drive_get_write_speed = 5540 (4.0x)
Current: DVD+R/DL
Profile: 0x002B (DVD+R/DL) (current)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
book type: DVD+R/DL (emulated booktype)
Product Id: RITEK/S04/48
Producer: Ritek Corp
Manufacturer: 'RITEK'
Media type: 'S04'
Mounted media class: DVD
Mounted media type: DVD+R/DL
Disk Is not erasable
disk status: incomplete/appendable
session status: empty
first track: 1
number of sessions: 1
first track in last sess: 1
last track in last sess: 1
Disk Is not unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Blank 1802912 4173823 2370912
Next writable address: 1802912
Remaining writable size: 2370912
------
I guess the DVD+R DL is now ruined. So I take another empty one, and
burn it with your recommended method:
$ growisofs -Z /dev/sr2=backup.iso -speed 1
Result: a success.
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]