Second case, check if cdrskin also has the problem (result: no)
Zhang Weiwu <[email protected]>
| Newsgroups | gmane.comp.audio.cd-record |
|---|---|
| Message-ID | <[email protected]> |
On 10/23/2010 03:02 PM, Thomas Schmitt wrote: > We would first try whether it brings better results (which i rather > doubt) and could then study the SCSI commands in detail (by option -V) > if it fails. Now, following instruction from Thomas on 10/30/2010 02:24 AM, I have both tools ready: almustafa@orphalese:/usr/local/src/xorriso-0.6.5$ xorriso/xorriso -version GNU xorriso 0.6.5 : RockRidge filesystem manipulator, libburnia project. GNU xorriso 0.6.5 ISO 9660 Rock Ridge filesystem manipulator and CD/DVD/BD burn program Copyright (C) 2010, Thomas Schmitt <[email protected]>, libburnia project. xorriso version : 0.6.5 Version timestamp : 2010.11.05.144616 Build timestamp : -none-given- libisofs in use : 0.6.39 (min. 0.6.39) libjte in use : 0.1.1 (min. 0.1.1) libburn in use : 0.8.9 (min. 0.8.9) libburn OS adapter: internal GNU/Linux SG_IO adapter sg-linux libisoburn in use : 0.6.5 (min. 0.6.5) License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. almustafa@orphalese:/usr/local/src/xorriso-0.6.5$ cd ../cdrskin-0.8.9/ almustafa@orphalese:/usr/local/src/cdrskin-0.8.9$ cdrskin/cdrskin -version cdrskin 0.8.9 : limited cdrecord compatibility wrapper for libburn Cdrecord 2.01-Emulation Copyright (C) 2006-2010, see libburnia-project.org System adapter : internal GNU/Linux SG_IO adapter sg-linux libburn interface : 0.8.9 libburn in use : 0.8.9 cdrskin version : 0.8.9 Version timestamp : 2010.10.29.174716 Build timestamp : -none-given- Let's burn: almustafa@orphalese:/usr/local/src/cdrskin-0.8.9$ cdrskin/cdrskin -multi -v speed=1 dev=/dev/sr1 /var/tmp/DVD+R/1st_session.iso cdrskin 0.8.9 : limited cdrecord compatibility wrapper for libburn cdrskin: verbosity level : 1 cdrskin: NOTE : greying out all drives besides given dev='/dev/sr1' cdrskin: scanning for devices ... cdrskin: ... scanning for devices done cdrskin: beginning to burn disc cdrskin: status 1 burn_disc_blank "The drive holds a blank disc" Current: DVD+R/DL Track 01: data 1586 MB Total size: 1586 MB (180:33.36) = 812352 sectors Lout start: 1586 MB (180:35/36) = 812352 sectors Starting to write CD/DVD at speed 1 in real SAO mode for multi session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 cdrskin: thank you for being patient for 44 seconds Track 01: 1586 of 1586 MB written (fifo 100%) [buf 97%] 2.2x. cdrskin: thank you for being patient for 546 seconds Fixating... cdrskin: working post-track (burning since 577 seconds) Track 01: Total bytes read/written: 1663696896/1663696896 (812352 sectors). Writing time: 577.570s Cdrskin: fifo had 812352 puts and 812352 gets. Cdrskin: fifo was 0 times empty and 73918 times full, min fill was 99%. Min drive buffer fill was 0% cdrskin: burning done And check the mount result in dmesg: [ 3155.339700] ISO 9660 Extensions: RRIP_1991A NO ERROR! To me it seems the problem is now solved. Conclusion: use cdrskin in place of wodim for DVD+R DL. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]