Re: Second case, check if cdrskin also has the problem (result: no)
Zhang Weiwu <[email protected]>
| Newsgroups | gmane.comp.audio.cd-record |
|---|---|
| Message-ID | <[email protected]> |
On 11/11/2010 08:20 PM, Thomas Schmitt wrote: > wodim option -V would bring more insight into the SCSI command > sequence that preceeds the failed command. > (If you got a blank 20 cent media left.) > I got plenty to spoil if you are interested in looking at it. Do you need? Next day I burn another when I am in the office. > What do you get from the failed DVD+R DL when executing again > dvd+rw-mediainfo /dev/sr1 From a different DVD reader but the same spoiled disco: yuliansu@Andalusia:~$ dvd+rw-mediainfo /dev/sr0 INQUIRY: [HL-DT-ST][DVDRAM GSA-H10A ][JL02] GET [CURRENT] CONFIGURATION: Mounted Media: 2Bh, DVD+R Double Layer Current Write Speed: 2.4x1385=3324KB/s Write Speed #0: 2.4x1385=3324KB/s GET [CURRENT] PERFORMANCE: Write Performance: 2.4x1385=3324KB/s@[0 -> 4173823] Speed Descriptor#0: 02/4173823 [email protected]=4568KB/s [email protected]=3324KB/s READ DVD STRUCTURE[#0h]: Media Book Type: 00h, DVD-ROM book [revision 0] Media ID: RITEK/D01 Legacy lead-out at: 2086912*2KB=4273995776 DVD+R DOUBLE LAYER BOUNDARY INFORMATION: L0 Data Zone Capacity: 2086912*2KB, can no longer be set READ DISC INFORMATION: Disc status: appendable Number of Sessions: 1 State of Last Session: incomplete "Next" Track: 1 Number of Tracks: 2 READ TRACK INFORMATION[#1]: Track State: partial/complete Track Start Address: 0*2KB Next Writable Address: 0*2KB Free Blocks: 812352*2KB Track Size: 812352*2KB READ TRACK INFORMATION[#2]: Track State: blank Track Start Address: 812368*2KB Next Writable Address: 812368*2KB Free Blocks: 3361456*2KB Track Size: 3361456*2KB READ CAPACITY: 0*2048=0 > After mounting ithe DVD (e.g. at /mnt) can you read all data file content > without any i/o error message ? Mount is not successful. I wrote the error message from dmesg when I mount, but I forgot to say mount failed with a message that I should check dmesg. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]