Re: [Bulk] Re: BD-RE mount problem
Gary Dale <[email protected]>
| Newsgroups | gmane.comp.audio.cd-record,gmane.linux.debian.user |
|---|---|
| Message-ID | <[email protected]> |
On 09/08/12 02:39 PM, Thomas Schmitt wrote: > Hi, > >> I also tried using K3B to burn as udf. >> mkisofs print size result: 0 (0 bytes) > This looks like a different problem. > A size prediction of 0 is hardly to explain by any state of > the target medium. How large should the result have been ? 59M or there about. The problem only shows up when I tell K3B to use udf, so I believe it is related. K3B and xorriso will burn iso9660. > > > What do you get from > > xorriso -outdev /dev/sr0 -blank as_needed \ > -md5 on -add /usr/local/bin -- > > (You may use any other existing directory. I have chosen /usr/local/bin > because it is normally not too large for a quick test.) root@transponder:/home/garydale# xorriso -outdev /dev/sr0 -blank as_needed \ > -md5 on -add /usr/local/bin xorriso 1.2.2 : RockRidge filesystem manipulator, libburnia project. Drive current: -outdev '/dev/sr0' Media current: BD-RE Media status : is blank Media summary: 0 sessions, 0 data blocks, 0 data, 22.6g free xorriso : NOTE : -blank as_needed: no need for action detected Added to ISO image: directory '/usr/local/bin'='/usr/local/bin' xorriso : UPDATE : Writing: 16s 8.3% fifo 0% buf 0% libburn : NOTE : Write start address is 32 * 2048 xorriso : UPDATE : Writing: 16s 8.3% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 80s 41.7% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.1xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB xorriso : UPDATE : Writing: 192s 100.0% fifo 0% buf 0% 0.0xB ISO image produced: 30 sectors Written to medium : 192 sectors at LBA 32 Writing to '/dev/sr0' completed successfully. The problem doesn't seem to be affecting iso9660 burns. However, I don't want iso9660 because it is read only. I need udf because it is a writable file system. > > If this fails, then you can get very verbous message output > by prepending -report_about and -scsi_log commands and by > catching the messages in file /tmp/xorriso.log > > xorriso -report_about all -scsi_log on \ > -outdev /dev/sr0 -blank as_needed \ > -md5 on -add /usr/local/bin -- \ > 2>&1 | tee -i /tmp/xorriso.log > > That file xorriso.log would be of interest then, of course. > > > Have a nice day :) > > Thomas > > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]