Re: dvd+rw-tools 7.1, Blu-Ray, and INVALID FIELD IN CDB on session close
"Ryan C. Underwood" <[email protected]>
| Newsgroups | gmane.comp.audio.cd-record |
|---|---|
| Message-ID | <[email protected]> |
New problem: After using xorriso successfully for several burns, now it works no longer, but fails with "Invalid address" almost immediately after formatting a new blank BD-R disc. $ xorriso -dev /dev/sr1 -volid "etc" -add * -- -commit_eject all xorriso 0.4.8 : RockRidge filesystem manipulator, libburnia project. xorriso : UPDATE : Thank you for being patient for 1 seconds Drive current: -dev '/dev/sr1' Media current: BD-R sequential recording Media status : is blank Media summary: 0 sessions, 0 data blocks, 0 data, 23.3g free Volume id : 'ISOIMAGE' xorriso : WARNING : -volid text problematic as automatic mount point name xorriso : WARNING : -volid text does not comply to ISO 9660 / ECMA 119 rules xorriso : WARNING : Pattern expansion of wildcards "*?[" is disabled by command -disk_pattern or -pathspecs xorriso : WARNING : Pattern seen: [Eng].txt Added to ISO image: [... 21GB of data ...] xorriso : UPDATE : 60 files added in 1 seconds xorriso : UPDATE : Thank you for being patient. Working since 0 seconds. xorriso : UPDATE : Thank you for being patient. Working since 1 seconds. xorriso : UPDATE : Thank you for being patient. Working since 2 seconds. xorriso : UPDATE : Thank you for being patient. Working since 3 seconds. xorriso : UPDATE : Thank you for being patient. Working since 4 seconds. xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.4xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 848s 0.0% fifo 100% buf 0% 0.0xB xorriso : UPDATE : Writing: 2640s 0.0% fifo 78% buf 28% 0.8xB libisofs: MISHAP : Image write cancelled libburn : FATAL : SCSI error on write(3600,16): [5 21 02] Invalid address xorriso : FATAL : -abort_on 'FATAL' encountered 'FATAL' during image writing xorriso : NOTE : libburn has now been urged to cancel its operation libburn : WARNING : Last session on media is still open. xorriso : FAILURE : libburn indicates failure with writing. xorriso : aborting : -abort_on 'FATAL' encountered 'FATAL' As usual there are no useful SCSI errors in the kernel messages. I tried two times with similar results. I updated firmware of BDR-205 to version 1.04, power cycled drive, then tried again with the same result. Then out of exasperation I tried growisofs -Z /dev/sr1 -rJ -V"etc" . and it gives me no problems except for the usual error in subject: [...] 0.04% done, estimate finish Tue Feb 16 18:45:54 2010 0.09% done, estimate finish Tue Feb 16 19:04:38 2010 0.13% done, estimate finish Tue Feb 16 18:58:23 2010 /dev/sr1: pre-formatting blank BD-R for 24.8GB... /dev/sr1: "Current Write Speed" is 10.2x4390KBps. 0.18% done, estimate finish Tue Feb 16 21:53:18 2010 0.22% done, estimate finish Tue Feb 16 21:30:45 2010 0.27% done, estimate finish Tue Feb 16 21:09:34 2010 0.31% done, estimate finish Tue Feb 16 20:59:43 2010 0.36% done, estimate finish Tue Feb 16 20:52:23 2010 [...] The only thing that I have done since last successful xorriso BD-R burn is burned a DVD+R-DL with wodim (failed) then with growisofs (success). But it would seem that having power cycled the drive should make that issue irrelevant. Here is the dvd+rw-mediainfo from one failed disc, are these discs dead now? INQUIRY: [PIONEER ][BD-RW BDR-205 ][1.03] GET [CURRENT] CONFIGURATION: Mounted Media: 41h, BD-R SRM Media ID: PHILIP/R04 Current Write Speed: 10.0x4495=44950KB/s Write Speed #0: 12.0x4495=53940KB/s Write Speed #1: 10.0x4495=44950KB/s Write Speed #2: 8.0x4495=35960KB/s Write Speed #3: 6.0x4495=26970KB/s Write Speed #4: 4.0x4495=17980KB/s Write Speed #5: 2.0x4495=8990KB/s Speed Descriptor#0: 00/12219391 [email protected]=44950KB/s [email protected]=44950KB/s Speed Descriptor#1: 00/12219391 [email protected]=35960KB/s [email protected]=35960KB/s Speed Descriptor#2: 00/12219391 [email protected]=26970KB/s [email protected]=26970KB/s Speed Descriptor#3: 00/12219391 [email protected]=17980KB/s [email protected]=17980KB/s Speed Descriptor#4: 00/12219391 [email protected]=8990KB/s [email protected]=8990KB/s READ DISC INFORMATION: Disc status: appendable Number of Sessions: 1 State of Last Session: incomplete "Next" Track: 1 Number of Tracks: 2 READ TRACK INFORMATION[#1]: Track State: partial incremental Track Start Address: 0*2KB Next Writable Address: 896*2KB Free Blocks: 11243776*2KB Track Size: 11244672*2KB Last Recorded Address: 879*2KB READ TRACK INFORMATION[#2]: Track State: invisible incremental Track Start Address: 11244672*2KB Next Writable Address: 11244672*2KB Free Blocks: 974720*2KB Track Size: 974720*2KB READ CAPACITY: 0*2048=0 And then a retry burn: $ xorriso -dev /dev/sr1 -add * -- -commit_eject all xorriso 0.4.8 : RockRidge filesystem manipulator, libburnia project. libburn : WARNING : Last session on media is still open. Only the output drive remains. Created empty ISO image. Drive current: -outdev '/dev/sr1' Media current: BD-R sequential recording Media status : is written , is appendable xorriso : FATAL : Cannot read ISO image tree xorriso : HINT : You might get a partial or altered ISO image tree by option -error_behavior 'image_loading' 'best_effort' if -abort_on is set to be tolerant enough. xorriso : aborting : -abort_on 'FATAL' encountered 'FATAL' P.S. you can Cc: [email protected] to get around my mail server issue for now. -- Ryan C. Underwood, <[email protected]> -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]