Re: solaris cdrecord BH08LS20 drive BD-R problems

Rob W <[email protected]>
Newsgroups gmane.comp.audio.cd-record
Message-ID <[email protected]>
> > Previously I was using the JMicron JM20336 USB-SATA bridge.
> > Now I have the JM20329, apparently a simpler (and slower) chip.
> > The BH08LS20 drive connected via USB 2.0, using blank BD-R disc

> Cdrecord will be changed to work-around the firmware bug

Tested last night with cdrtools a77 version on sun ultra 60 with solaris 10
The work-around allowed me to burn a 7 GB image to blu-ray disc
but it took over 2 hours, seemingly as slow as growisofs on that machine
How do I get cdrecord to burn at 2x speed?

# cdrecord -v dev=4,0,0 speed=2 driveropts=burnfree image.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (sparc-sun-solaris2.10)
TOC Type: 1 = CD-ROM
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.9'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'BD-RE  BH08LS20 '
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: BD-R sequential recording
Profile: BD-ROM
Profile: BD-R sequential recording (current)
Profile: BD-R random recording
Profile: BD-RE
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: DVD-RW sequential recording
Profile: DVD-RW restricted overwrite
Profile: DVD+RW
Profile: DVD+R
Profile: DVD+R/DL
Profile: DVD-ROM
Profile: CD-R
Profile: CD-RW
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags   : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 2097152 = 2048 KB
Drive pbuf size: 3932160 = 3840 KB
Drive DMA Speed: 1575 kB/s 8x CD 1x DVD 0x BD
FIFO size      : 4194304 = 4096 KB
Track 01: data  6614 MB
Total size:     6614 MB = 3386473 sectors
Current Secsize: 2048
WARNING: Drive returns zero media size, correcting.
Blocks total: 12219392 Blocks current: 12219392 Blocks remaining: 8832919
Reducing transfer size from 64512 to 32768 bytes.
Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 6614 of 6614 MB written (fifo 100%) [buf  31%]   0.2x.
Track 01: Total bytes read/written: 6935496704/6935496704 (3386473 sectors).
Writing  time: 7189.700s
Average write speed   0.2x.
Min drive buffer fill was 12%
Fixating...
Fixating time:   19.265s
cdrecord: fifo had 211655 puts and 211655 gets.
cdrecord: fifo was 0 times empty and 181399 times full, min fill was 87%.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.