Re: What does this error stand for ?

On Wed, Jul 28, 2010 at 03:47:30PM +0200, Joerg Schilling wrote:

Hello,

thank for your answer.

I just followed what cdrecord ask me to do : report the error.

Another media of the same kind gives me :

cdrecord -minfo
Cdrecord-ProDVD-ProBD-Clone 3.00 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 Jörg Schilling
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
No target specified, trying to find one...
Using dev=5,0,0.
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'TSSTcorp'
Identifikation : 'CDDVDW SH-S223F '
Revision       : 'SB03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Mounted media class:      DVD
Mounted media type:       DVD+R/DL
Disk Is not erasable
data type:                standard
disk status:              empty
session status:           empty
BG format status:         none
first track:              1
number of sessions:       1
first track in last sess: 1
last track in last sess:  1
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD

Track  Sess Type   Start Addr End Addr   Size
==============================================
    1     1 Blank  0          4173823    4173824

Next writable address:              0
Remaining writable size:            4173824

Or dvd+rw-mediainfo /dev/sr0
INQUIRY:                [TSSTcorp][CDDVDW SH-S223F ][SB03]
GET [CURRENT] CONFIGURATION:
 Mounted Media:         2Bh, DVD+R Double Layer
 Current Write Speed:   8.0x1385=11080KB/s
 Write Speed #0:        8.0x1385=11080KB/s
 Write Speed #1:        6.0x1385=8310KB/s
 Write Speed #2:        4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
 Write Performance:     8.0x1385=11080KB/s@[0 -> 4173824]
 Speed Descriptor#0:    00/4173823 [email protected]=16620KB/s [email protected]=11080KB/s
 Speed Descriptor#1:    00/4173823 [email protected]=16620KB/s [email protected]=8310KB/s
 Speed Descriptor#2:    00/4173823 [email protected]=16620KB/s [email protected]=5540KB/s
READ DVD STRUCTURE[#0h]:
 Media Book Type:       00h, DVD-ROM book [revision 0]
 Media ID:              RICOHJPN/D01
 Legacy lead-out at:    2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
 L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
 Disc status:           blank
 Number of Sessions:    1
 State of Last Session: empty
 "Next" Track:          1
 Number of Tracks:      1
READ TRACK INFORMATION[#1]:
 Track State:           blank
 Track Start Address:   0*2KB
 Next Writable Address: 0*2KB
 Free Blocks:           4173824*2KB
 Track Size:            4173824*2KB
 ROM Compatibility LBA: 265696
READ CAPACITY:          0*2048=0

So my burner is a Samsung SH-S223F and the medias are from Prodye.
I don't have hald running here and two medias died in the process, I
tried the third one with growisofs which burns it fine.
Sure my media are cheaps one and it don't mean anthing.
Again I just repported it because of the cdrecord message.
If my repport is of no use just forget about it :-)

Gave a nice day,

> Without any information on HW and media, I asume that either your media is 
> cheap junk or that hald or other unfriendly programs did interrupt the write 
> process.

-- 
Grégoire Favre, Chemin de Mallieu 15, 1009 Pully, +41 21 550 61 93 
prof -> Gymnase de Chamblandes, Avenue des Désertes 29, 1009 Pully
sip -> [email protected]  / gsm -> +41 78 765 65 00
http://www.gycham.vd.ch/~greg / netvoip.ch : +41 21 544 77 44


-- 
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]