Building under MSVC & MinGW

Brendan Grant <[email protected]> Sat, 20 Sep 2014 17:12:05 +0000

Newsgroups	gmane.comp.audio.compression.speex.devel
Message-ID	<c9b7869e14574ce68ab753c912ebfc94@BL2PR01MB483.prod.exchangelabs.com>

I am attempting to build the RC1 drop of libspeex for Windows with the MSVC toolchain (VS2013) and MinGW, the following is my configure line:

CC=cl.exe CFLAGS=-MD ./configure --enable-shared=no --prefix /builds/Windows81/x86 --host i686-pc-mingw32

During the configure process (specifically the "checking whether the C compiler works...") I get a Windows popup telling me that the test program cannot started because it is missing msvcr12_app.dll (which is ok given the way store apps work), and closing the error and the resulting crash dialog allows configure to complete seemingly normally.

When I kick off the make things appear to proceed along for a while with a linking failure at the end of:

LINK : fatal error LNK1181: cannot open input file 'cb_search.obj'

Nothing really stands out about the building of cb_search.obj... other than the fact there are no obj files anywhere in the directory which makes me suspect that nothing at all was built, yet nothing in the attached big log screams to me as having those kinds of issues.

For note, this same MinGW+VS2013 environment and very similar args were able to configure & build libogg just fine earlier... so I'm left puzzled as to what could be wrong here.

Any ideas?

Thanks,
Brendan

_______________________________________________
Speex-dev mailing list
[email protected]
http://lists.xiph.org/mailman/listinfo/speex-dev

config.log (application/octet-stream, 114.4 KB) - not displayed

libspeex build log.txt (text/plain, 26.9 KB)

$ make
make  all-recursive
make[1]: Entering directory `/c/Users/Brendan/Desktop/speex-1.2rc1/speex-1.2rc1'

Making all in libspeex
make[2]: Entering directory `/c/Users/Brendan/Desktop/speex-1.2rc1/speex-1.2rc1/
libspeex'
source='cb_search.c' object='cb_search.lo' libtool=yes \
        depfile='.deps/cb_search.Plo' tmpdepfile='.deps/cb_search.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o cb_se
arch.lo cb_search.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_10_32_table.c' object='exc_10_32_table.lo' libtool=yes \
        depfile='.deps/exc_10_32_table.Plo' tmpdepfile='.deps/exc_10_32_table.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_1
0_32_table.lo exc_10_32_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_8_128_table.c' object='exc_8_128_table.lo' libtool=yes \
        depfile='.deps/exc_8_128_table.Plo' tmpdepfile='.deps/exc_8_128_table.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_8
_128_table.lo exc_8_128_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='filters.c' object='filters.lo' libtool=yes \
        depfile='.deps/filters.Plo' tmpdepfile='.deps/filters.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o filte
rs.lo filters.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='gain_table.c' object='gain_table.lo' libtool=yes \
        depfile='.deps/gain_table.Plo' tmpdepfile='.deps/gain_table.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o gain_
table.lo gain_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='hexc_table.c' object='hexc_table.lo' libtool=yes \
        depfile='.deps/hexc_table.Plo' tmpdepfile='.deps/hexc_table.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o hexc_
table.lo hexc_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='high_lsp_tables.c' object='high_lsp_tables.lo' libtool=yes \
        depfile='.deps/high_lsp_tables.Plo' tmpdepfile='.deps/high_lsp_tables.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o high_
lsp_tables.lo high_lsp_tables.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='lsp.c' object='lsp.lo' libtool=yes \
        depfile='.deps/lsp.Plo' tmpdepfile='.deps/lsp.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o lsp.l
o lsp.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='ltp.c' object='ltp.lo' libtool=yes \
        depfile='.deps/ltp.Plo' tmpdepfile='.deps/ltp.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o ltp.l
o ltp.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='speex.c' object='speex.lo' libtool=yes \
        depfile='.deps/speex.Plo' tmpdepfile='.deps/speex.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o speex
.lo speex.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='stereo.c' object='stereo.lo' libtool=yes \
        depfile='.deps/stereo.Plo' tmpdepfile='.deps/stereo.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o stere
o.lo stereo.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='vbr.c' object='vbr.lo' libtool=yes \
        depfile='.deps/vbr.Plo' tmpdepfile='.deps/vbr.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o vbr.l
o vbr.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='vq.c' object='vq.lo' libtool=yes \
        depfile='.deps/vq.Plo' tmpdepfile='.deps/vq.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o vq.lo
 vq.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='bits.c' object='bits.lo' libtool=yes \
        depfile='.deps/bits.Plo' tmpdepfile='.deps/bits.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o bits.
lo bits.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_10_16_table.c' object='exc_10_16_table.lo' libtool=yes \
        depfile='.deps/exc_10_16_table.Plo' tmpdepfile='.deps/exc_10_16_table.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_1
0_16_table.lo exc_10_16_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_20_32_table.c' object='exc_20_32_table.lo' libtool=yes \
        depfile='.deps/exc_20_32_table.Plo' tmpdepfile='.deps/exc_20_32_table.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_2
0_32_table.lo exc_20_32_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_5_256_table.c' object='exc_5_256_table.lo' libtool=yes \
        depfile='.deps/exc_5_256_table.Plo' tmpdepfile='.deps/exc_5_256_table.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_5
_256_table.lo exc_5_256_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='exc_5_64_table.c' object='exc_5_64_table.lo' libtool=yes \
        depfile='.deps/exc_5_64_table.Plo' tmpdepfile='.deps/exc_5_64_table.TPlo
' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o exc_5
_64_table.lo exc_5_64_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='gain_table_lbr.c' object='gain_table_lbr.lo' libtool=yes \
        depfile='.deps/gain_table_lbr.Plo' tmpdepfile='.deps/gain_table_lbr.TPlo
' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o gain_
table_lbr.lo gain_table_lbr.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='hexc_10_32_table.c' object='hexc_10_32_table.lo' libtool=yes \
        depfile='.deps/hexc_10_32_table.Plo' tmpdepfile='.deps/hexc_10_32_table.
TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o hexc_
10_32_table.lo hexc_10_32_table.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='lpc.c' object='lpc.lo' libtool=yes \
        depfile='.deps/lpc.Plo' tmpdepfile='.deps/lpc.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o lpc.l
o lpc.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='lsp_tables_nb.c' object='lsp_tables_nb.lo' libtool=yes \
        depfile='.deps/lsp_tables_nb.Plo' tmpdepfile='.deps/lsp_tables_nb.TPlo'
\
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o lsp_t
ables_nb.lo lsp_tables_nb.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='modes.c' object='modes.lo' libtool=yes \
        depfile='.deps/modes.Plo' tmpdepfile='.deps/modes.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o modes
.lo modes.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='modes_wb.c' object='modes_wb.lo' libtool=yes \
        depfile='.deps/modes_wb.Plo' tmpdepfile='.deps/modes_wb.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o modes
_wb.lo modes_wb.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='nb_celp.c' object='nb_celp.lo' libtool=yes \
        depfile='.deps/nb_celp.Plo' tmpdepfile='.deps/nb_celp.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o nb_ce
lp.lo nb_celp.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='quant_lsp.c' object='quant_lsp.lo' libtool=yes \
        depfile='.deps/quant_lsp.Plo' tmpdepfile='.deps/quant_lsp.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o quant
_lsp.lo quant_lsp.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='sb_celp.c' object='sb_celp.lo' libtool=yes \
        depfile='.deps/sb_celp.Plo' tmpdepfile='.deps/sb_celp.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o sb_ce
lp.lo sb_celp.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='speex_callbacks.c' object='speex_callbacks.lo' libtool=yes \
        depfile='.deps/speex_callbacks.Plo' tmpdepfile='.deps/speex_callbacks.TP
lo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o speex
_callbacks.lo speex_callbacks.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='speex_header.c' object='speex_header.lo' libtool=yes \
        depfile='.deps/speex_header.Plo' tmpdepfile='.deps/speex_header.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o speex
_header.lo speex_header.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
source='window.c' object='window.lo' libtool=yes \
        depfile='.deps/window.Plo' tmpdepfile='.deps/window.TPlo' \
        depmode=none /bin/sh ../depcomp \
        /bin/sh ../libtool --mode=compile cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I
../include -I../include -I.. -I/builds/Windows81/x86/include     -MD -c -o windo
w.lo window.c
../libtool: line 1231: cygpath: command not found
 cl.exe -DHAVE_CONFIG_H -I. -I. -I.. -I../include -I../include -I.. -I/builds/Wi
ndows81/x86/include -MD -c ""
Microsoft (R) C/C++ Optimizing Compiler Version 18.00.30723 for x86
Copyright (C) Microsoft Corporation.  All rights reserved.

cl : Command line warning D9024 : unrecognized source file type '', object file
assumed
cl : Command line warning D9027 : source file '' ignored
cl : Command line warning D9021 : no action performed
/bin/sh ../libtool --mode=link cl.exe  -MD   -o libspeex.la -rpath /builds/Windo
ws81/x86/lib -no-undefined -version-info 6:0:5 cb_search.lo exc_10_32_table.lo e
xc_8_128_table.lo filters.lo gain_table.lo hexc_table.lo high_lsp_tables.lo lsp.
lo ltp.lo speex.lo stereo.lo vbr.lo vq.lo bits.lo exc_10_16_table.lo exc_20_32_t
able.lo exc_5_256_table.lo exc_5_64_table.lo gain_table_lbr.lo hexc_10_32_table.
lo lpc.lo lsp_tables_nb.lo modes.lo modes_wb.lo nb_celp.lo quant_lsp.lo sb_celp.
lo speex_callbacks.lo speex_header.lo window.lo  -lwinmm -lm
mkdir .libs
lib -OUT:.libs/libspeex.lib  cb_search.obj exc_10_32_table.obj exc_8_128_table.o
bj filters.obj gain_table.obj hexc_table.obj high_lsp_tables.obj lsp.obj ltp.obj
 speex.obj stereo.obj vbr.obj vq.obj bits.obj exc_10_16_table.obj exc_20_32_tabl
e.obj exc_5_256_table.obj exc_5_64_table.obj gain_table_lbr.obj hexc_10_32_table
.obj lpc.obj lsp_tables_nb.obj modes.obj modes_wb.obj nb_celp.obj quant_lsp.obj
sb_celp.obj speex_callbacks.obj speex_header.obj window.obj
Microsoft (R) Library Manager Version 12.00.30723.0
Copyright (C) Microsoft Corporation.  All rights reserved.

LINK : fatal error LNK1181: cannot open input file 'cb_search.obj'
make[2]: *** [libspeex.la] Error 157
make[2]: Leaving directory `/c/Users/Brendan/Desktop/speex-1.2rc1/speex-1.2rc1/l
ibspeex'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/c/Users/Brendan/Desktop/speex-1.2rc1/speex-1.2rc1'
make: *** [all] Error 2