Re: channel manipulation

On Wed, September 26, 2012 10:49 pm, Patrick Shirkey wrote:
>
> On Wed, September 26, 2012 10:09 pm, Julien Claassen wrote:
>> Hi Patrick!
>>    This should be it. Try it. Once with a stereo file, with different
>> signals
>> in left and right channel and once with say a sine wave of the same
>> frequency
>> and phase in both channels, so you can hear, if the 3rd channel mix is
>> correct:
>
> Just to confirm :-)
>
>
>> ecasound -f:16,3,44100 -a:1,2,3,4 -i test.wav \
>>    -a:1 -chmix:1 \
>
> mix input 1,2 to output 1
>
>
>>    -a:2 -chmute:2 -chmove:1,2 \
>
> mute input 2, copy input 1 to output 2
>
>
>>    -a:3 -chmute:2 -chmove:1,3 \
>
> mute input 2, copy input 1 to output 3
>
>>    -a:4 -chmute:1 -ea:-100 -chmove:2,3 \
>
> mute input 1, invert signal, copy inverted input 2 to output 3
>
> The combination of -a:3 and -a:4 results in left input + right input
> inverted on output channel 3.
>
>
>
>>    -a:all -o test-out.wav


I'm making some progress but I am stuck with another problem now.

How do I send the output of a loop to a specific channel?

Is this correct?

-a:5 -chmute:2 -ea:-100 \
-a:6 -chmute:1 \
-a:5,6 -o loop,1 \
-a:7 -i loop,1 -chmix:5 \



--
Patrick Shirkey
Boost Hardware Ltd

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Ecasound-list mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ecasound-list