Re: Xfade samples during note?

>> >I'm trying to do something with an existing patch, and I'm not finding it in
>> >the manual anywhere -
>> >
>> >I have a patch with 4 groups for each note, with dynamics that go from mp to
>> >f to ff to fff.
>> >
>> >I'd like to be able to crossfade between the groups *during* a single note,
>> >using the mod wheel, to simulate a swell. Is this possible?
> 
> Nope. =(
> 
> There is only one "Select Range" destination available, so only one
> source can take it. You have Velocity taking it. (See the modulation
> matrix, Vel->Sample Select. "Sample Select" refers to Select Range"
> in the Groups or Zones.)
> 
> To have a MW XFade, you'd have to have the MW address the "Select
> Range" parameter.
> 
> Now, IF you had just one velocity, then here's how you would do it.
> 
> Take 4 Groups that set Select Range as follows:
> 
> 0-0, 42-42, 84-84, 127-127
> 
> Then set XFade in the front panel (it's a global parameter) to
> "+-42", and set a Modulation to Ctl 1, Dest as Sample Select, and
> amount to 100%. There's you XFade.
> 
> Looking backwards, you can see that there's no room for velocity
> splits now, since the MW took that over.
> 
> That's probably my #1 or #2 shortcoming, and the most silly
> limitation, of the EXS24.
> 
> Garth Hjelte
> Sampler User
> 
 
Garth -

This actually works exactly the way I want it to. The way the patch worked
originally was that every zone had all four groups assigned, and every note
event ­ regardless of velocity ­ triggered all four groups for every zone
(the ³Select Range² box is unchecked in every zone). Setting it up the way
you described now allows me to affect precisely the crossfade I was going
for.

THANK YOU ! !

 - PH 

------------------------------------

________________________________________________________________________
EXS Users Group - new web forums! http://logic-users.org/forums/EXS
- To UNSUBSCRIBE: email [email protected]
- Search the entire archive: http://logic-users.org/forums/EXS/searchYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/exs-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/exs-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/