Re: midi control of EXS parameters

On 21/04/2008, Eli Krantzberg <elik-XzQKRVe1yT0V+D8aMU/[email protected]> wrote:

>  Hi John ,
>
>  I just checked, by hooking up a monitor to the channel strip, and it
>  seems like the three modes are controlled by fader message 7. A value
>  of 0 is poly, 1 is mono, and 2 is legato.
>
>  Don't forget that these respond to fader messages; so you'll need to
>  hook up a transformer in the environment to convert the incoming
>  pedal messages appropriately.
>
>  Also, don't forget that with L8's internal architecture, the
>  instrument plugins are set to respond on MIDI channel 2.
>
>  HTH.

Thanks, Eli, lots of great info - I'm away from Logic right now but
will try this and report back.
-- 
with best wishes,
John
http://abram.ca

------------------------------------

________________________________________________________________________
EXS Users Group - new web forums! http://logic-users.org/forums/EXS
- To UNSUBSCRIBE: email [email protected]
- Search the entire archive: http://logic-users.org/forums/EXS/searchYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/exs-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/exs-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/