Re: Re: Core Audio and DAE together (was LOGIC 8 -DTDM/DAE Problem.

What are your Sync Settings for the two engines in Logic?

Peter
---
http://www.merlinsound.de


Am 07.02.2008 um 12:15 schrieb ricky:

> Message posted by ricky <ricky-3mT5L/[email protected]>:
>
> i want to be clear... do this test
>
> create an empty song with dtdm turned off and nothing playing from  
> tdm audio tracks.
>
> put an exs24 on core audio intrument 1 and do a pattern and loop it  
> over the song...
> then bounce let's say 1 minute of that loop and put the bounced file  
> in core audio track 1
>
> now if you press play it should play in Sync, perfectly in sync.
>
> do not cycle the song.. loop the audio and midi and listen over the  
> song..
>
> now in the audio you have just bounced do some random cuts over the  
> file in arrange with the scissor.. do not move the audio.. just cut.
>
> now create a tdm audio track and load anything you want on that...  
> put the audio in arrange, lower the volume if you want as you don't  
> need to hear it.
>
> press play now.. you will hear that even exs24 and core audio track  
> will flange.. and the flange changes everytime you have do the cut  
> with the scissors.
>
> so in sync with what? in sync with itself ;)
>
> you can still use tdm plug-ins and processings on
>
> 1- any live input on your tdm
> 2- any aux
> 3- any digital or adat input you have from core audio, i have 24 in  
> to put tdm plug.ins that is enough for me.
>
> i prefer being sample accurate than using tdm tracks, and i prefer  
> core audio tracks than dae tracks so i finally stop working with  
> stereo splitted files.
>
> hope it's clear now ;)
>
>
> ________________________________________________________________________
> Logic TDM Users Group - new forums! http://logic-users.org/forums/L- 
> TDM
> - To UNSUBSCRIBE: email [email protected]
> - Search the entire archive: http://logic-users.org/forums/L-TDM/ 
> search
> Yahoo! Groups Links
>
>
>
>



[Non-text portions of this message have been removed]



________________________________________________________________________
Logic TDM Users Group - new forums! http://logic-users.org/forums/L-TDM
- To UNSUBSCRIBE: email [email protected]
- Search the entire archive: http://logic-users.org/forums/L-TDM/search 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/logic-tdm/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/logic-tdm/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:[email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/