Outboard gears w/ I/O Plug-in

Hello,

jmdanton has just posted in the Logic 9 forum of Logic Users Group under the title of Outboard gears w/ I/O Plug-in.

This thread is located at http://www.logic-users-group.com/forums/showthread.php?t=4175

Here is the message that has just been posted:
***************
Hi Guys,
I have a problem with my i/o plug-in, I have a G5 2x3 ghz quad-core intel, OSX 10.6.5,  and 2 MOTU 2408MK3, and Logic 9.1.3

My set-up in Logic and my Motu PCI audio set-up and cue mix console are the following:
Channels 1 to 8 = Analog inputs 1 to 8
Channels 9 to 16 = Adat inputs 9 to 16
Channels 17 to 18 = SPDIF 17 to 18
Channels 19 to 26 = Analog inputs 19 to 26
Channels 27 to 34 = Adat inputs 27 to 34
Channels 35 to 36 = SPDIF 35 to 36
Same for the outputs!
so with both MOTU I have available, 16 analog in&out, 16 Adat in & out and 2 SPDIF in&out.

When I insert my I/O plug-in (in any kind of channels), to use an outboard gear like a compressor or EQ, the choices of inputs and outputs the I/O shows me is completly different from my set-up. 
It shows me  analog 1/2/3/4 in&out availble, Adat 1/2/3/4 in&out available, 1 SPDIF in&out available, Analog 10/11/12/13 available, Adat 14/15/16/17 in&out available and channels 18 to 36 in&out of SPDIF available.
I plugged an instrument on all my analog inputs 1 to 16 and they all worked(outputs work as well), but thru the I/O plug-in, only analog channels 3 to 4 are working (1 & 2  cannot be used because linked to the stereo out), also the i/o plug shows channels 10 to 13 analog but they don't worked thru the I/O, but really my channels 10 to 13 should be my adats in&out!!

So the I/O plug-in shows a different set-up, it shows me something crazy like 20 channles of SPDIF, 8 Analog channels, 8 channels of Adat...(Should be 16 analogs, 16 adats and 4 SPDIF)

Strange...Do you know if there is a place to configure this I/O plug-in or is this coming from my set-up knowing that outside the I/O plug-in my set-up is alright?
Thanks
Jean-Michel
***************


------------------------------------

The LUG has a new home on the web,  to visit and sign up please go to:

http://www.logic-users-group.com/











Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/logic-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/logic-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/