Logic 9.1.3. CPU spikes problem
"Logic Users Group" <po-r/[email protected]>
| Newsgroups | gmane.comp.audio.emagic.logic.users |
|---|---|
| Message-ID | <[email protected]> |
Hello,
kogstudio has just posted in the Logic 9 forum of Logic Users Group under the title of Logic 9.1.3. CPU spikes problem.
This thread is located at http://www.logic-users-group.com/forums/showthread.php?t=4350
Here is the message that has just been posted:
***************
Hey there
Just wondering if anyone can help.
I'm getting CPU spikes on logic sessions [i.e. from 1 or 2 bars on the CPU meter, to near full bars in a quick jump and then down to 1 or 2 bars again].
The HDD bar goes in sync from 1 bar to say 4 or 5 bars.
Often it also spikes to the maximum and then playback stops with an error saying not enough processing [-10011]
I'm only playing back 20 audio track with no plugins on them, and recording in on 6 stereo tracks [24 bit 44.1K]. If I stop the recording of the stereo tracks and just play the recorded signal with the other tracks the problem still occurs
The buffer size selected doesn't make a difference to this spiking (or how much it raises) whether it is at 64 samples or 1024 samples.
Process buffer was set at medium or large
Logic is using ~1.9 Gig of memory
Tried in 32 and 64 bit mode, no difference
Computer specs
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 9 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Hard drives - ran off internal 7200 SATA drive and Firewire 800 and no difference to the CPU spiking problem [i.e. the same]
Any help much appreciated
***************
------------------------------------
The LUG has a new home on the web, to visit and sign up please go to:
http://www.logic-users-group.com/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/logic-users/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/logic-users/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/