Re: [SoundDiver] Re:AMT on XP issue (Unitor Control / Virus Control)

GRAHAM ATKINS <[email protected]>
Newsgroups gmane.comp.audio.emagic.sounddiver
Message-ID <[email protected]>
What cable are you talking about ?

RS-232 and MIDI are 2 totally different data protocols, the latter  
using 5-Pin din connectors.

I assume the cable you refer to is the serial data computer / Unitor  
connection.....Midi has
no bearing on this.

Graham
On Oct 8, 2008, at 0:15, Microcode List wrote:

> Thanks for the tip to check the appendix. From what I can see I do  
> NOT want to have a straight cable.
>
> However, I don't seem to recall RS-232 cables being sold as 'midi'  
> compatible?
>
> Is there a certain type I want?
>
> RDP
>
> > Hello,
> >
> > i am afraid "serial cable" alone doesn't mean much
> > what kind of serial cable ? pin to pin ? null modem ?
> >
> > get some info there
> >
> > http://www.lammertbies.nl/comm/cable/RS-232.html
> >
> > i would suggest to beep and check the 2 pinout ends of your cable
> > to see exactly what it is
> > Often (but not ONLY or always) the problem is pin 2 to pin 3 and 3  
> to 2
> > instead of pin 2 to pin 2 and 3 to 3
> >
> > You can find pinout assignments is appendix A.3 of the Unitor8  
> MkII / AMT8 user manual.
> >
> > Andrea
> >
> >
> > Posted by: "Microcode List" [email protected] listmicrocode
> > Mon Oct 6, 2008 7:02 pm (PDT)
> > Having issues since I moved apartments.
> >
> > Setup AMT8, bought new RS-232 serial cable (lost old one).
> >
> > System cannot find/communicate with the unit.
> >
> > Reinstalled AMT8 serial drivers.
> >
> > No change.
> >
> > Re-plugged cables, no change.
> >
> >
> > Could my COM port be shot? Seems strange to me.
> >
> > XP shows the drivers installed, and I can see the COM port  
> reported properly as well.
> >
> > I never have had a problem with my AMT8 before. Puzzled over why I  
> have an issue now.
> >
> >
> > Any ideas?
> >
> > Thanks,
> > RDP

------------------------------------

________________________________________________________________________
SoundDiver Users Group - new forums! http://logic-users.org/forums/SD
- To UNSUBSCRIBE: email sounddiver-users-unsubscribe-hHKSG33TihhbjbujkaE4pw@public.gmane.org
- Search the entire archive: http://logic-users.org/forums/SD/searchYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/sounddiver-users/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/sounddiver-users/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[email protected] 
    mailto:sounddiver-users-fullfeatured-hHKSG33TihhbjbujkaE4pw@public.gmane.org

<*> To unsubscribe from this group, send an email to:
    sounddiver-users-unsubscribe-hHKSG33TihhbjbujkaE4pw@public.gmane.org

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.