Re: [LAU] CVS commit - JAMin 0.97.08

Hey, now I **really** tune my impulse responses! ;-)

Cheers,
Mark

On 6/29/07, Jan Depner <[email protected]> wrote:
>
>     *  Added per band delay to low and mid bands.
>
>     *  Changed initialization value from 0.1 to 0.0001 in rms.c
>        to avoid jump on startup.
>
>     The delay works is useful for compensating for the different arrival
> times at speaker systems of low and mid frequencies versus high
> frequencies (or driver placement).  The first time I encountered this
> was in using Rane crossovers but it is also in other crossovers and is
> hardwired into the BBE Sonic Maximizer.  For the purists in the user
> pool - it only took up two tiny little checkboxes and if you don't want
> to use them just don't check them ;-)  There's very little processing
> overhead involved since I avoided the use of if statements in the
> processing loop.
>
>
> Steve,
>
>     As this is my first incursion into the actual processing code, could
> you please take a look at how I implemented this and make sure I didn't
> miss something?  It's basically the same code that you suggested except
> that I needed two counters (port 0 and port 1).
>
>
> Cheers,
> Jan
>
>
> --
> Jan 'Evil Twin' Depner
> http://myweb.cableone.net/eviltwin69
>
> "Life should NOT be a journey to the grave with the intention of
> arriving safely in an attractive and well preserved body, but rather to
> skid in sideways, chardonnay in one hand, chocolate in the other, body
> thoroughly used up, totally worn out, and screaming 'WOO HOO, what a ride'"
>
> _______________________________________________
> Linux-audio-user mailing list
> [email protected]
> http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
>

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/