[PATCH 0/3] Proposed changes to LAME

Rogério Brito <[email protected]>
Newsgroups gmane.comp.audio.mp3.lame
Message-ID <1338533143-32273-1-git-send-email-rbrito__15093.8540850349$1338534282$gmane$org@ime.usp.br>
Hi there.

I am taking a look at packaging HandBrake for Debian and, while doing it, I
noticed that we (Debian) had some patches against lame that were not applied
in our (lame, upstream) tree.

Some of the patches I saw in Debian's packaging effort that seem to be worth
applying are included in this series.

I did some facelifting here and there, to include more details in the
changelog (for future reference---and tried to dig up some historical facts
for justification of the patches).

I hope that I have not broken anything in other environments (e.g., in
Windows land or operating systems other than Debian/Ubuntu systems), but
since I am not 100% confident with the changes, I am asking here for some
peer-review.

If I don't receive further feedback in 1 week, I will just commit the
changes to the main branch of lame's CVS repo, but, of course, I would
prefer to receive at least one ACK or NACK before doing so.

Regards,
Rogério Brito.

Rogério Brito (3):
  configure.in: Rewrap for (human) legibility.
  acinclude.m4: Include GTK-1 autoconf directives in build system.
  libmp3lame: Fix possible race condition causing build failures.

 acinclude.m4                |  193 +++++++++++++++++++++++++++++++++++++++++++
 configure.in                |   25 +++++-
 libmp3lame/i386/Makefile.am |    8 +-
 3 files changed, 221 insertions(+), 5 deletions(-)

-- 
1.7.10

From b160836f7a1d16a56d1add054b7a0e5d6a20a825 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rog=C3=A9rio=20Brito?= <[email protected]>
Date: Fri, 1 Jun 2012 02:21:58 -0300
Subject: [PATCH 1/3] configure.in: Rewrap for (human) legibility.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
To: [email protected]
Cc: [email protected]

This also helps by being diff-friendly if we change only one of the parts of
a long line.

Signed-off-by: Rogério Brito <[email protected]>
---
 configure.in |   25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/configure.in b/configure.in
index edf39b8..46da876 100644
--- a/configure.in
+++ b/configure.in
@@ -1152,6 +1152,29 @@ AC_SUBST(CPUCCODE)
 
 AC_SUBST(CONFIG_DEFS)
 
-AC_CONFIG_FILES([Makefile libmp3lame/Makefile libmp3lame/i386/Makefile libmp3lame/vector/Makefile frontend/Makefile mpglib/Makefile doc/Makefile doc/html/Makefile doc/man/Makefile include/Makefile Dll/Makefile misc/Makefile debian/Makefile dshow/Makefile ACM/Makefile ACM/ADbg/Makefile ACM/ddk/Makefile ACM/tinyxml/Makefile lame.spec mac/Makefile macosx/Makefile macosx/English.lproj/Makefile macosx/LAME.xcodeproj/Makefile vc_solution/Makefile])
+AC_CONFIG_FILES([Makefile \
+		 libmp3lame/Makefile \
+		 libmp3lame/i386/Makefile \
+		 libmp3lame/vector/Makefile \
+		 frontend/Makefile \
+		 mpglib/Makefile \
+		 doc/Makefile \
+		 doc/html/Makefile \
+		 doc/man/Makefile \
+		 include/Makefile \
+		 Dll/Makefile \
+		 misc/Makefile \
+		 debian/Makefile \
+		 dshow/Makefile \
+		 ACM/Makefile \
+		 ACM/ADbg/Makefile \
+		 ACM/ddk/Makefile \
+		 ACM/tinyxml/Makefile \
+		 lame.spec \
+		 mac/Makefile \
+		 macosx/Makefile \
+		 macosx/English.lproj/Makefile \
+		 macosx/LAME.xcodeproj/Makefile \
+		 vc_solution/Makefile])
 
 AC_OUTPUT
-- 
1.7.10


From 27edb7f9472b5f727da9896d51235aeb71fc876d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rog=C3=A9rio=20Brito?= <[email protected]>
Date: Fri, 1 Jun 2012 02:43:00 -0300
Subject: [PATCH 2/3] acinclude.m4: Include GTK-1 autoconf directives in build
 system.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
To: [email protected]
Cc: [email protected]

Resurrect knowledge of how to deal with GTK1. This was transplanted back
from aclocal.m4 with a patch provided by Andres Mejia <[email protected]>,
from Debian's packaging of lame, even though the original code is attributed
to Owen Taylor and dated 97-11-3.

Anyway, with this part not lost again, we can easily regenerate autotools'
files with a simple `autoconf -vfi` invocation.

Signed-off-by: Rogério Brito <[email protected]>
---
 acinclude.m4 |  193 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 193 insertions(+)

diff --git a/acinclude.m4 b/acinclude.m4
index 0b8f869..eef0c3d 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -85,4 +85,197 @@ int main(void)
 [AC_MSG_WARN(can't check for IEEE854 compliant 80 bit floats)]
 )])]) # alex_IEEE854_FLOAT80
 
+# Configure paths for GTK+
+# Owen Taylor     97-11-3
 
+dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
+dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
+dnl
+AC_DEFUN([AM_PATH_GTK],
+[dnl
+dnl Get the cflags and libraries from the gtk-config script
+dnl
+AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
+            gtk_config_prefix="$withval", gtk_config_prefix="")
+AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
+            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
+AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
+        , enable_gtktest=yes)
+
+  for module in . $4
+  do
+      case "$module" in
+         gthread)
+             gtk_config_args="$gtk_config_args gthread"
+         ;;
+      esac
+  done
+
+  if test x$gtk_config_exec_prefix != x ; then
+     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+     if test x${GTK_CONFIG+set} != xset ; then
+        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+     fi
+  fi
+  if test x$gtk_config_prefix != x ; then
+     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+     if test x${GTK_CONFIG+set} != xset ; then
+        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+     fi
+  fi
+
+  AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
+  min_gtk_version=ifelse([$1], ,0.99.7,$1)
+  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
+  no_gtk=""
+  if test "$GTK_CONFIG" = "no" ; then
+    no_gtk=yes
+  else
+    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
+    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
+    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_gtktest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $GTK_CFLAGS"
+      LIBS="$GTK_LIBS $LIBS"
+dnl
+dnl Now check if the installed GTK is sufficiently new. (Also sanity
+dnl checks the results of gtk-config to some extent
+dnl
+      rm -f conf.gtktest
+      AC_TRY_RUN([
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.gtktest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = g_strdup("$min_gtk_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_gtk_version");
+     exit(1);
+   }
+
+  if ((gtk_major_version != $gtk_config_major_version) ||
+      (gtk_minor_version != $gtk_config_minor_version) ||
+      (gtk_micro_version != $gtk_config_micro_version))
+    {
+      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+             gtk_major_version, gtk_minor_version, gtk_micro_version);
+      printf ("*** was found! If gtk-config was correct, then it is best\n");
+      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+      printf("*** required on your system.\n");
+      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
+      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
+      printf("*** before re-running configure\n");
+    }
+#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
+  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+     (gtk_minor_version != GTK_MINOR_VERSION) ||
+           (gtk_micro_version != GTK_MICRO_VERSION))
+    {
+      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+       GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+      printf("*** library (version %d.%d.%d)\n",
+       gtk_major_version, gtk_minor_version, gtk_micro_version);
+    }
+#endif /* defined (GTK_MAJOR_VERSION) ... */
+  else
+    {
+      if ((gtk_major_version > major) ||
+        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+      {
+        return 0;
+       }
+     else
+      {
+        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+               gtk_major_version, gtk_minor_version, gtk_micro_version);
+        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+         major, minor, micro);
+        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+        printf("***\n");
+        printf("*** If you have already installed a sufficiently new version, this error\n");
+        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
+        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
+        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+        printf("*** so that the correct libraries are found at run-time))\n");
+      }
+    }
+  return 1;
+}
+],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_gtk" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])
+  else
+     AC_MSG_RESULT(no)
+     if test "$GTK_CONFIG" = "no" ; then
+       echo "*** The gtk-config script installed by GTK could not be found"
+       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the GTK_CONFIG environment variable to the"
+       echo "*** full path to gtk-config."
+     else
+       if test -f conf.gtktest ; then
+        :
+       else
+          echo "*** Could not run GTK test program, checking why..."
+          CFLAGS="$CFLAGS $GTK_CFLAGS"
+          LIBS="$LIBS $GTK_LIBS"
+          AC_TRY_LINK([
+#include <gtk/gtk.h>
+#include <stdio.h>
+],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding GTK or finding the wrong"
+          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+    echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
+          echo "***"
+          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
+          echo "*** came with the system with the command"
+          echo "***"
+          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
+          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
+          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     GTK_CFLAGS=""
+     GTK_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(GTK_CFLAGS)
+  AC_SUBST(GTK_LIBS)
+  rm -f conf.gtktest
+])
-- 
1.7.10


From a50b77fc0aa5a59fef2ef8cb1a7a8e56d324ba4d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rog=C3=A9rio=20Brito?= <[email protected]>
Date: Fri, 1 Jun 2012 02:53:12 -0300
Subject: [PATCH 3/3] libmp3lame: Fix possible race condition causing build
 failures.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
To: [email protected]
Cc: [email protected]

This was discovered in automated builds by the Debian project and the patch
provided is by Andres Mejia <[email protected]>.

Please, note that only part of the patch (the one touching Makefile.am) was
applied, since the changes in Makefile.in should be picked up when
regenerating files with autotools.

Signed-off-by: Rogério Brito <[email protected]>
---
 libmp3lame/i386/Makefile.am |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/libmp3lame/i386/Makefile.am b/libmp3lame/i386/Makefile.am
index a375225..032c2b2 100644
--- a/libmp3lame/i386/Makefile.am
+++ b/libmp3lame/i386/Makefile.am
@@ -15,6 +15,7 @@ nasm_sources = \
 if HAVE_NASM
 noinst_LTLIBRARIES = liblameasmroutines.la
 liblameasmroutines_la_SOURCES = $(nasm_sources)
+liblameasmroutines_la_DEPENDENCIES = $(nasm_sources:.nas.lo)
 am_liblameasmroutines_la_OBJECTS = \
 	choose_table$U.lo \
 	cpu_feat$U.lo \
@@ -53,11 +54,10 @@ NASMFLAGS=@NASM_FORMAT@ -i $(top_srcdir)/libmp3lame/@CPUTYPE@/
 	$(NASM) $(NASMFLAGS) $< -o $@ -l [email protected]
 
 .nas.lo: $< nasm.h
-	mkdir -p .libs
 	$(ECHO) '# Generated by ltmain.sh - GNU libtool 1.5.22 (1.1220.2.365 2005/12/18 22:14:06)' >$@
-	$(ECHO) "pic_object='.libs/$*.o'" >>$@
-	$(ECHO) "non_pic_object='.libs/$*.o'" >>$@
-	$(NASM) $(NASMFLAGS) $< -o .libs/$*.o -l [email protected]
+	$(ECHO) "pic_object='$*.o'" >>$@
+	$(ECHO) "non_pic_object='$*.o'" >>$@
+	$(NASM) $(NASMFLAGS) $< -o $*.o -l [email protected]
 
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-- 
1.7.10


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Lame-dev mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/lame-dev
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.